BRNSystems/brnQuanFW
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases 2 Wiki Activity

Rename build option

Browse Source
This commit is contained in:
Krzysiek Egzmont
2023-11-06 23:18:24 +01:00
parent cf4f85cb22
commit 05feff432e
4 changed files with 6 additions and 6 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
Makefile
View File

@@ -26,7 +26,7 @@ ENABLE_CTCSS_TAIL_PHASE_SHIFT := 0
ENABLE_BOOT_BEEPS := 0
ENABLE_SHOW_CHARGE_LEVEL := 1
ENABLE_REVERSE_BAT_SYMBOL := 0
ENABLE_CODE_SCAN_TIMEOUT := 0
ENABLE_NO_CODE_SCAN_TIMEOUT := 1
ENABLE_AM_FIX := 1
ENABLE_AM_FIX_SHOW_DATA := 0
ENABLE_SQUELCH_MORE_SENSITIVE := 1
@@ -283,7 +283,7 @@ endif
ifeq ($(ENABLE_REVERSE_BAT_SYMBOL),1)
CFLAGS += -DENABLE_REVERSE_BAT_SYMBOL
endif
ifeq ($(ENABLE_CODE_SCAN_TIMEOUT),1)
ifeq ($(ENABLE_NO_CODE_SCAN_TIMEOUT),1)
CFLAGS += -DENABLE_CODE_SCAN_TIMEOUT
endif
ifeq ($(ENABLE_AM_FIX),1)

4
README.md
View File

@@ -98,12 +98,12 @@ ENABLE_SMALL_BOLD := 1 bold channel name/no. (when name + freq
ENABLE_KEEP_MEM_NAME := 1 maintain channel name when (re)saving memory channel
ENABLE_WIDE_RX := 1 full 18MHz to 1300MHz RX (though front-end/PA not designed for full range)
ENABLE_TX_WHEN_AM := 0 allow TX (always FM) when RX is set to AM
ENABLE_F_CAL_MENU := 0 enable/disable the radios hidden frequency calibration menu
ENABLE_F_CAL_MENU := 0 enable the radios hidden frequency calibration menu
ENABLE_CTCSS_TAIL_PHASE_SHIFT := 1 standard CTCSS tail phase shift rather than QS's own 55Hz tone method
ENABLE_BOOT_BEEPS := 0 gives user audio feedback on volume knob position at boot-up
ENABLE_SHOW_CHARGE_LEVEL := 0 show the charge level when the radio is on charge
ENABLE_REVERSE_BAT_SYMBOL := 1 mirror the battery symbol on the status bar (+ pole on the right)
ENABLE_CODE_SCAN_TIMEOUT := 0 enable/disable 32-sec CTCSS/DCS scan timeout (press exit butt instead of time-out to end scan)
ENABLE_NO_CODE_SCAN_TIMEOUT := 1 disable 32-sec CTCSS/DCS scan timeout (press exit butt instead of time-out to end scan)
ENABLE_AM_FIX := 1 dynamically adjust the front end gains when in AM mode to helo prevent AM demodulator saturation, ignore the on-screen RSSI level (for now)
ENABLE_AM_FIX_SHOW_DATA := 1 show debug data for the AM fix (still tweaking it)
ENABLE_SQUELCH_MORE_SENSITIVE := 0 make squelch levels a little bit more sensitive - I plan to let user adjust the values themselves

2
app/app.c
View File

@@ -1546,7 +1546,7 @@ void APP_TimeSlice500ms(void)
if (disp == DISPLAY_INVALID)
{
#ifndef ENABLE_CODE_SCAN_TIMEOUT
#ifndef ENABLE_NO_CODE_SCAN_TIMEOUT
if (!SCANNER_IsScanning())
#endif
disp = DISPLAY_MAIN;

2
app/scanner.c
View File

@@ -503,7 +503,7 @@ void SCANNER_TimeSlice500ms(void)
{
if (SCANNER_IsScanning() && gScannerSaveState == SCAN_SAVE_NO_PROMPT && gScanCssState < SCAN_CSS_STATE_FOUND) {
gScanProgressIndicator++;
#ifdef ENABLE_CODE_SCAN_TIMEOUT
#ifdef ENABLE_NO_CODE_SCAN_TIMEOUT
if (gScanProgressIndicator > 32) {
if (gScanCssState == SCAN_CSS_STATE_SCANNING && !gScanSingleFrequency)
gScanCssState = SCAN_CSS_STATE_FOUND;