BRNSystems/brnQuanFW
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases 2 Wiki Activity

Refactoring

Browse Source
This commit is contained in:
Krzysiek Egzmont
2023-11-29 17:55:47 +01:00
parent f9e10da9ee
commit 44ff33613a
2 changed files with 12 additions and 4 deletions
Download Patch File Download Diff File Expand all files Collapse all files

10
Makefile
View File

@@ -2,11 +2,14 @@
# compile options (see README.md for descriptions) # compile options (see README.md for descriptions)
# 0 = disable # 0 = disable
# 1 = enable # 1 = enable
#
# ---- COMPILER/LINKER OPTIONS ----
ENABLE_CLANG := 0 ENABLE_CLANG := 0
ENABLE_SWD := 0 ENABLE_SWD := 0
ENABLE_OVERLAY := 0 ENABLE_OVERLAY := 0
ENABLE_LTO := 1 ENABLE_LTO := 1
# ---- STOCK QUANSHENG FERATURES ----
ENABLE_UART := 1 ENABLE_UART := 1
ENABLE_AIRCOPY := 0 ENABLE_AIRCOPY := 0
ENABLE_FMRADIO := 1 ENABLE_FMRADIO := 1
@@ -16,6 +19,9 @@ ENABLE_VOX := 1
ENABLE_ALARM := 0 ENABLE_ALARM := 0
ENABLE_TX1750 := 0 ENABLE_TX1750 := 0
ENABLE_PWRON_PASSWORD := 0 ENABLE_PWRON_PASSWORD := 0
ENABLE_DTMF_CALLING := 1
# ---- CUSTOM MODS ----
ENABLE_BIG_FREQ := 1 ENABLE_BIG_FREQ := 1
ENABLE_SMALL_BOLD := 1 ENABLE_SMALL_BOLD := 1
ENABLE_KEEP_MEM_NAME := 1 ENABLE_KEEP_MEM_NAME := 1
@@ -39,7 +45,7 @@ ENABLE_REDUCE_LOW_MID_TX_POWER:= 0
ENABLE_BYP_RAW_DEMODULATORS := 0 ENABLE_BYP_RAW_DEMODULATORS := 0
ENABLE_BLMIN_TMP_OFF := 0 ENABLE_BLMIN_TMP_OFF := 0
ENABLE_SCAN_RANGES := 1 ENABLE_SCAN_RANGES := 1
ENABLE_DTMF_CALLING := 1
############################################################# #############################################################
TARGET = firmware TARGET = firmware

6
README.md
View File

@@ -93,6 +93,7 @@ ENABLE_CLANG := 0 **experimental, builds with clang instead
ENABLE_SWD := 0 only needed if using CPU's SWD port (debugging/programming) ENABLE_SWD := 0 only needed if using CPU's SWD port (debugging/programming)
ENABLE_OVERLAY := 0 cpu FLASH stuff, not needed ENABLE_OVERLAY := 0 cpu FLASH stuff, not needed
ENABLE_LTO := 1 **experimental, reduces size of compiled firmware but might break EEPROM reads (OVERLAY will be disabled if you enable this) ENABLE_LTO := 1 **experimental, reduces size of compiled firmware but might break EEPROM reads (OVERLAY will be disabled if you enable this)
ENABLE_UART := 1 without this you can't configure radio via PC ! ENABLE_UART := 1 without this you can't configure radio via PC !
ENABLE_AIRCOPY := 0 easier to just enter frequency with butts ENABLE_AIRCOPY := 0 easier to just enter frequency with butts
ENABLE_FMRADIO := 1 WBFM VHF broadcast band receiver ENABLE_FMRADIO := 1 WBFM VHF broadcast band receiver
@@ -102,6 +103,8 @@ ENABLE_VOX := 1
ENABLE_ALARM := 0 TX alarms ENABLE_ALARM := 0 TX alarms
ENABLE_TX1750 := 0 side key 1750Hz TX tone (older style repeater access) ENABLE_TX1750 := 0 side key 1750Hz TX tone (older style repeater access)
ENABLE_PWRON_PASSWORD := 0 power-on password stuff ENABLE_PWRON_PASSWORD := 0 power-on password stuff
ENABLE_DTMF_CALLING := 1 DTMF calling fuctionality, sending calls, receiving calls, group calls, contacts list etc.
ENABLE_BIG_FREQ := 1 big font frequencies (like original QS firmware) ENABLE_BIG_FREQ := 1 big font frequencies (like original QS firmware)
ENABLE_SMALL_BOLD := 1 bold channel name/no. (when name + freq channel display mode) ENABLE_SMALL_BOLD := 1 bold channel name/no. (when name + freq channel display mode)
ENABLE_KEEP_MEM_NAME := 1 maintain channel name when (re)saving memory channel ENABLE_KEEP_MEM_NAME := 1 maintain channel name when (re)saving memory channel
@@ -124,8 +127,7 @@ ENABLE_SPECTRUM := 1 fagci spectrum analyzer, activated with
ENABLE_REDUCE_LOW_MID_TX_POWER:= 0 makes medium and low power settings even lower ENABLE_REDUCE_LOW_MID_TX_POWER:= 0 makes medium and low power settings even lower
ENABLE_BYP_RAW_DEMODULATORS := 0 additional BYP (bypass?) and RAW demodulation options, proved not to be very useful, but it is there if you want to experiment ENABLE_BYP_RAW_DEMODULATORS := 0 additional BYP (bypass?) and RAW demodulation options, proved not to be very useful, but it is there if you want to experiment
ENABLE_BLMIN_TMP_OFF := 0 additional function for configurable buttons that toggles `BLMin` on and off wihout saving it to the EEPROM ENABLE_BLMIN_TMP_OFF := 0 additional function for configurable buttons that toggles `BLMin` on and off wihout saving it to the EEPROM
ENABLE_SCAN_RANGES := 1 set VFO for A & B then hold NOAA button to scan within range ENABLE_SCAN_RANGES := 1 scan range mode for frequency scanning, see wiki for instructions (radio operation -> frequency scanning)
ENABLE_DTMF_CALLING := 1 use * Scan button to enter DTMF code and then PTT to send
``` ```