Merge branch 'batcal'

README.md

@@ -55,9 +55,10 @@ ENABLE_OVERLAY                := 0       cpu FLASH stuff, not needed
 ENABLE_LTO                    := 0     **experimental, reduces size of compiled firmware but might break EEPROM reads (overlay will be disabled if you enable this)
 ENABLE_UART                   := 1       without this you can't configure radio via PC !
 ENABLE_AIRCOPY                := 0       easier to just enter frequency with butts
-ENABLE_FMRADIO                := 1       WBFM VHF broadcast band receiver
+ENABLE_FMRADIO                := 0       WBFM VHF broadcast band receiver
 ENABLE_NOAA                   := 0       everything NOAA (only of any use in the USA)
 ENABLE_VOICE                  := 0       want to hear voices ?
+ENABLE_VOX                    := 0
 ENABLE_ALARM                  := 0       TX alarms
 ENABLE_1750HZ                 := 0       side key 1750Hz TX tone (older style repeater access)
 ENABLE_BIG_FREQ               := 0       big font frequencies (like original QS firmware)
@@ -69,17 +70,16 @@ ENABLE_F_CAL_MENU             := 0       enable/disable the radios hidden freque
 ENABLE_CTCSS_TAIL_PHASE_SHIFT := 1       standard CTCSS tail phase shift rather than QS's own 55Hz tone method
 ENABLE_MAIN_KEY_HOLD          := 1       initial F-key press not needed, instead just hold down keys 0-9 to access the secondary butt functions
 ENABLE_BOOT_BEEPS             := 0       gives user audio feedback on volume knob position at boot-up
-ENABLE_COMPANDER              := 0       this is broken, don't bother with it for now .. compander option (per channel)
 ENABLE_SHOW_CHARGE_LEVEL      := 0       show the charge level when the radio is on charge
 ENABLE_REVERSE_BAT_SYMBOL     := 1       mirror the battery symbol on the status bar (+ pole on the right)
 ENABLE_CODE_SCAN_TIMEOUT      := 0       enable/disable 32-sec CTCSS/DCS scan timeout (press exit butt instead of time-out to end scan)
 ENABLE_AM_FIX                 := 1       dynamically adjust the front end gains when in AM mode to helo prevent AM demodulator saturation, ignore the on-screen RSSI level (for now)
 ENABLE_AM_FIX_SHOW_DATA       := 1       show debug data for the AM fix (still tweaking it)
-ENABLE_SQUELCH_MORE_SENSITIVE := 1       make squelch levels a little bit more sensitive - I plan to let user adjust the values themselves
+ENABLE_SQUELCH_MORE_SENSITIVE := 0       make squelch levels a little bit more sensitive - I plan to let user adjust the values themselves
 ENABLE_FASTER_CHANNEL_SCAN    := 0       increases the channel scan speed, but the squelch is also made more twitchy
 ENABLE_RSSI_BAR               := 1       enable a dBm/Sn RSSI bar graph level inplace of the little antenna symbols
 ENABLE_AUDIO_BAR              := 0       experimental, display an audo bar level when TX'ing
-#ENABLE_COPY_CHAN_TO_VFO      := 1       not yet implemented - copy the current channel into the VFO
+ENABLE_COPY_CHAN_TO_VFO       := 1       copy current channel into the other VFO. Long press Menu key ('M')
 #ENABLE_SINGLE_VFO_CHAN       := 1       not yet implemented - single VFO on display when possible
 #ENABLE_BAND_SCOPE            := 1       not yet implemented - spectrum/pan-adapter
 ```