EEPROM layout (settings.h), replacing the broken 24 byte layout from
85fb527 (200 x 24 B channels overran the VFOs, attributes and settings;
names were saved at ch*24 but read at ch*20):
- 32 byte channel records with the 10 char name and the 16 bit scrambler
inside, 171 channels in two areas (0x0000, 0x11E0); VFOs at 0x1020 with
the same record; attributes moved to 0x0F50.
- Message store from 0x1900: 26 messages of 40 characters.
- Reset VFO no longer wipes the memory channels and messages.
- Static asserts that no area overlaps another or the calibration.
Identity: reports "BRN-POCSAG v4.0" to CHIRP and in the packed image, so
stock / egzumer / F4HWN drivers do not accept the new layout; the name is
shown on the welcome screen.
Make toggles: ENABLE_POCSAG, ENABLE_POCSAG_DEBUG, ENABLE_POCSAG_DEV_TUNING,
ENABLE_OOK_SENDER (POCSAG code and the OOK sender compile out completely).
Fonts: removed the unused big font, big digits and small digits; the 3x5
font is only built with the spectrum.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Spectrum: GUI_DisplaySmallest() now draws with gFontSmall (7 px per
character) for the status bar; the spectrum layout needs the 3x5 font
(4 px), so it gets its own renderer again. Its labels were overlapping.
- make BANDSCOPE=1: spectrum instead of the FM radio. Both do not fit in
60 KB together (FM radio is 4.9 KB). Debug log off and -finline-limit=1
in that edition; it fits with a few bytes to spare.
- OOK sender on F+7 / long 7 (the VOX key is free, VOX is not built);
F+EXIT is back to only cancelling F.
- POCSAG deviation tuning keys behind POCSAG_DEVIATION_TUNING (default 0).
- Smaller code: shared end of SMS/POCSAG transmissions, non-inlined fast
SPI wait, compact OOK field tables, sprintf message header, shorter OOK
strings.
- Makefile: EXTRA_CFLAGS for passing defines.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
OOK sender for 433 MHz remotes: PT2262, EV1527, rc-switch protocols 1-7,
Intertechno self-learning and raw Manchester. The carrier is keyed with the
PA enable line through a new fast BK4819 GPIO write (~25 us instead of
~300 us), and every edge is scheduled on an absolute SysTick clock.
F+EXIT never opened the OOK sender: APP_ProcessKey cancels the F state for
EXIT before the screen handler runs. Open it there instead.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>