Files
brnQuanFW/app/fskmodem.h
T
BRNSystemsandClaude Opus 5.5 aabd0f4956 BRN-POCSAG: 171 channels, 26 x 40 char messages, make toggles
EEPROM layout (settings.h), replacing the broken 24 byte layout from
85fb527 (200 x 24 B channels overran the VFOs, attributes and settings;
names were saved at ch*24 but read at ch*20):
- 32 byte channel records with the 10 char name and the 16 bit scrambler
  inside, 171 channels in two areas (0x0000, 0x11E0); VFOs at 0x1020 with
  the same record; attributes moved to 0x0F50.
- Message store from 0x1900: 26 messages of 40 characters.
- Reset VFO no longer wipes the memory channels and messages.
- Static asserts that no area overlaps another or the calibration.

Identity: reports "BRN-POCSAG v4.0" to CHIRP and in the packed image, so
stock / egzumer / F4HWN drivers do not accept the new layout; the name is
shown on the welcome screen.

Make toggles: ENABLE_POCSAG, ENABLE_POCSAG_DEBUG, ENABLE_POCSAG_DEV_TUNING,
ENABLE_OOK_SENDER (POCSAG code and the OOK sender compile out completely).

Fonts: removed the unused big font, big digits and small digits; the 3x5
font is only built with the spectrum.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-15 01:43:05 +01:00

149 lines
4.1 KiB
C

//
// Created by bruno on 25.2.2025.
//
#ifndef UV_K5_FIRMWARE_CUSTOM_FSKMODEM_H
#define UV_K5_FIRMWARE_CUSTOM_FSKMODEM_H
#include <stdint.h>
#include <stdbool.h>
#include "../driver/bk4819.h"
#include "../driver/bk4819-regs.h"
#include "../settings.h"
#include "stddef.h"
#include "../driver/system.h"
#include "../misc.h"
#include "../app/app.h"
#include <string.h>
#include "../audio.h"
#include <stdio.h>
#include "../ui/helper.h"
#include "../ui/main.h"
// REG_70 bit definitions
#define TONE1_ENABLE_BIT (1U << 15)
#define TONE1_GAIN_MASK (0x7FU << 8)
#define TONE2_ENABLE_BIT (1U << 7)
#define TONE2_GAIN_MASK (0x7FU << 0)
// REG_58 bit definitions
// FSK Tx Mode Selection (REG_58<15:13>)
#define FSK_TX_MODE_FSK_1_2K_2_4K (0U << 13) // 000
#define FSK_TX_MODE_FFSK_1200_1800 (1U << 13) // 001
#define FSK_TX_MODE_FFSK_1200_2400 (3U << 13) // 011
#define FSK_TX_MODE_NOAA_SAME (5U << 13) // 101
// FSK Rx Mode Selection (REG_58<12:10>)
#define FSK_RX_MODE_FSK_1_2K_2_4K_NOAA (0U << 10) // 000
#define FSK_RX_MODE_FFSK_1200_1800 (7U << 10) // 111
#define FSK_RX_MODE_FFSK_1200_2400 (4U << 10) // 100
// FSK Rx Gain (REG_58<9:8>)
#define FSK_RX_GAIN_DEFAULT (0U << 8) // 00
#define FSK_RX_GAIN_TYPE_C (1U << 8) // 01
#define FSK_RX_GAIN_TYPE_B (2U << 8) // 10
#define FSK_UNKNOWN_MASK (3U << 6)
// FSK Preamble Type Selection (REG_58<5:4>)
#define FSK_PREAMBLE_TYPE_AA (3U << 4) // 11
#define FSK_PREAMBLE_TYPE_55 (2U << 4) // 10
#define FSK_PREAMBLE_TYPE_UNKNOWN (0U << 4) // 00
// FSK Rx Bandwidth Setting (REG_58<3:1>)
#define FSK_RX_BW_2_4K_FFSK_1200_2400 (4U << 1) // 100
#define FSK_RX_BW_1_2K (0U << 1) // 000
#define FSK_RX_BW_FFSK_1200_1800 (1U << 1) // 001
#define FSK_RX_BW_NOAA_SAME (2U << 1) // 010
#define FSK_ENABLE_BIT (1U << 0)
// REG_59 bit definitions
#define FSK_CLEAR_TX_FIFO (1U << 15)
#define FSK_CLEAR_RX_FIFO (1U << 14)
#define FSK_SCRAMBLE_ENABLE (1U << 13)
#define FSK_RX_ENABLE (1U << 12)
#define FSK_TX_ENABLE (1U << 11)
#define FSK_INVERT_RX (1U << 10)
#define FSK_INVERT_TX (1U << 9)
#define FSK_PREAMBLE_LEN_MASK (15U << 4)
#define FSK_SYNC_LEN_BIT (1U << 3)
//#define FSK_SYNC_BYTE0 0x30
//#define FSK_SYNC_BYTE1 0x72
//#define FSK_SYNC_BYTE2 0x57
//#define FSK_SYNC_BYTE3 0x6c
#define FSK_SYNC_BYTE0 0x42
#define FSK_SYNC_BYTE1 0x52
#define FSK_SYNC_BYTE2 0x4E
#define FSK_SYNC_BYTE3 0x51
#define FSK_CRC_ON (1U << 6)
#define FSK_CRC_OFF (0U << 6)
#define DataPacketDataSize (21)
#define SEQParameterEEPROM 0x1900 // message counters, after the channels (settings.h)
typedef struct __attribute__((packed)){
uint32_t dest; //4bytes
uint32_t src; //4bytes
uint8_t seq; //1bytes
uint8_t ttl; //1bytes
uint8_t flags; //1bytes
uint8_t data[DataPacketDataSize];
} DataPacket;
void prepareDataPacket();
void MSG_FSKSendData(DataPacket *dataPacketIn);
void MSG_EnableRX(bool enable);
void processReceivedPacket(DataPacket *packet);
uint16_t calculateCRC(uint8_t *data, size_t length);
extern DataPacket dataPacket;
extern DataPacket inBoundPacket;
typedef enum {
SMS_NOT_ENTERING = 0,
SMS_ENTERING_DEST,
SMS_ENTERING_MESSAGE
} SMSEnteringState;
typedef enum {
SMS_RESPONSE_IDLE,
SMS_RESPONSE_ACK,
SMS_RESPONSE_ACK_LIGHT,
SMS_RESPONSE_RETRANSMIT,
SMS_RESPONSE_RESEND
} SMSResponseState;
extern SMSEnteringState gEnteringSMS;
extern SMSResponseState gSMSResponseState;
extern char *dataPTR; // cursor into gMessageText (app/messages.h)
extern bool gGotACK;
extern uint8_t SMSResponseCounter;
void FSK_HANDLE_IRQ(unsigned short irq);
void FSKModem_TimeSlice500ms(void);
// Transmit an alphanumeric POCSAG page to the given RIC.
void MSG_POCSAGSend(uint32_t ric, const char *text);
// POCSAG TX deviation (BK4819 REG_40<11:0>). Build with -DPOCSAG_DEVIATION_TUNING=1
// to adjust it at runtime with keys 2 / 8 on the messages screen.
#ifndef POCSAG_DEVIATION_TUNING
#define POCSAG_DEVIATION_TUNING 0
#endif
#if POCSAG_DEVIATION_TUNING
extern uint16_t gPocsagDeviation;
void POCSAG_AdjustDeviation(int delta);
#endif
#endif //UV_K5_FIRMWARE_CUSTOM_FSKMODEM_H