Files
brnQuanFW/driver/backlight.c
Bruno Rybársky f4ff2e6048
Some checks failed
Build Firmware / build (push) Failing after 3m21s
Apply my changes v1
2025-02-27 16:49:04 +01:00

168 lines
3.9 KiB
C

/* Copyright 2023 Dual Tachyon
* https://github.com/DualTachyon
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "backlight.h"
#include "bsp/dp32g030/gpio.h"
#include "bsp/dp32g030/pwmplus.h"
#include "bsp/dp32g030/portcon.h"
#include "driver/gpio.h"
#include "settings.h"
#ifdef ENABLE_FEAT_F4HWN
#include "driver/system.h"
#include "audio.h"
#include "misc.h"
#endif
// this is decremented once every 500ms
uint16_t gBacklightCountdown_500ms = 0;
bool backlightOn;
#ifdef ENABLE_FEAT_F4HWN
const uint8_t value[] = {0, 3, 6, 9, 15, 24, 38, 62, 100, 159, 255};
#endif
#ifdef ENABLE_FEAT_F4HWN_SLEEP
uint16_t gSleepModeCountdown_500ms = 0;
#endif
void BACKLIGHT_InitHardware()
{
// 48MHz / 94 / 1024 ~ 500Hz
const uint32_t PWM_FREQUENCY_HZ = 25000;
PWM_PLUS0_CLKSRC |= ((48000000 / 1024 / PWM_FREQUENCY_HZ) << 16);
PWM_PLUS0_PERIOD = 1023;
PORTCON_PORTB_SEL0 &= ~(0
// Back light
| PORTCON_PORTB_SEL0_B6_MASK
);
PORTCON_PORTB_SEL0 |= 0
// Back light PWM
| PORTCON_PORTB_SEL0_B6_BITS_PWMP0_CH0
;
PWM_PLUS0_GEN =
PWMPLUS_GEN_CH0_OE_BITS_ENABLE |
PWMPLUS_GEN_CH0_OUTINV_BITS_ENABLE |
0;
PWM_PLUS0_CFG =
PWMPLUS_CFG_CNT_REP_BITS_ENABLE |
PWMPLUS_CFG_COUNTER_EN_BITS_ENABLE |
0;
}
static void BACKLIGHT_Sound(void)
{
gK5startup = false;
}
void BACKLIGHT_TurnOn(void)
{
#ifdef ENABLE_FEAT_F4HWN_SLEEP
gSleepModeCountdown_500ms = gSetting_set_off * 120;
#endif
#ifdef ENABLE_FEAT_F4HWN
gBacklightBrightnessOld = BACKLIGHT_GetBrightness();
#endif
if (gEeprom.BACKLIGHT_TIME == 0) {
BACKLIGHT_TurnOff();
#ifdef ENABLE_FEAT_F4HWN
if(gK5startup == true)
{
BACKLIGHT_Sound();
}
#endif
return;
}
backlightOn = true;
#ifdef ENABLE_FEAT_F4HWN
if(gK5startup == true) {
#if defined(ENABLE_FMRADIO) && defined(ENABLE_SPECTRUM)
BACKLIGHT_SetBrightness(gEeprom.BACKLIGHT_MAX);
#else
for(uint8_t i = 0; i <= gEeprom.BACKLIGHT_MAX; i++)
{
BACKLIGHT_SetBrightness(i);
SYSTEM_DelayMs(50);
}
#endif
BACKLIGHT_Sound();
}
else
{
BACKLIGHT_SetBrightness(gEeprom.BACKLIGHT_MAX);
}
#else
BACKLIGHT_SetBrightness(gEeprom.BACKLIGHT_MAX);
#endif
switch (gEeprom.BACKLIGHT_TIME) {
default:
case 1 ... 60: // 5 sec * value
gBacklightCountdown_500ms = 1 + (gEeprom.BACKLIGHT_TIME * 5) * 2;
break;
case 61: // always on
gBacklightCountdown_500ms = 0;
break;
}
}
void BACKLIGHT_TurnOff()
{
#ifdef ENABLE_BLMIN_TMP_OFF
register uint8_t tmp;
if (gEeprom.BACKLIGHT_MIN_STAT == BLMIN_STAT_ON)
tmp = gEeprom.BACKLIGHT_MIN;
else
tmp = 0;
BACKLIGHT_SetBrightness(tmp);
#else
BACKLIGHT_SetBrightness(gEeprom.BACKLIGHT_MIN);
#endif
gBacklightCountdown_500ms = 0;
backlightOn = false;
}
bool BACKLIGHT_IsOn()
{
return backlightOn;
}
static uint8_t currentBrightness;
void BACKLIGHT_SetBrightness(uint8_t brigtness)
{
currentBrightness = brigtness;
PWM_PLUS0_CH0_COMP = value[brigtness] * 4;
//PWM_PLUS0_CH0_COMP = (1 << brigtness) - 1;
//PWM_PLUS0_SWLOAD = 1;
}
uint8_t BACKLIGHT_GetBrightness(void)
{
return currentBrightness;
}