Commit Graph

53 Commits

Author SHA1 Message Date
paramat
63a3bb229a Changes to static object storage limit and error message
Move static object storage force-delete message from errorstream to
warningstream.
Increase 'max objects per block' setting to 64.
Add missing spaces in warning code.
2016-10-20 03:40:47 +01:00
ShadowNinja
2ff054d041 Enable mod security by default 2016-10-16 01:14:54 +01:00
SmallJoker
b6569f1c69 Add missing languages to the settings 2016-10-11 07:32:47 +02:00
Loic Blot
d4c76258e3 Chat: new settings to prevent spam
Added the following chat coreside features
* Chat messages length limit
* Message rate limiting
* Message rate kicking

Note:
* handleChat now takes RemotePlayer pointer instead of u16 to remove useless
  lookups
2016-10-05 00:13:37 +02:00
James Stevenson
679c8de63f Increase default font size by 1 2016-09-21 08:04:11 +02:00
Rui
3b0f7659c7 Document keymap_autorun in settingtypes.txt and minetest.conf.example (#4486) 2016-08-30 05:40:48 +02:00
red-001
fbe4a9267f Settingtypes.txt: Clarify comments, correct spelling 2016-08-29 01:00:05 +01:00
est31
d767f025cb Client: disable pre v25 init sending by default
Disable the ability to connect to old servers by default to
improve password security.

If people still want to connect to old (0.4.12 and earlier)
servers, they can flip the send_pre_v25_init setting.

Add the ability to detect if we've tried to connect
to a server which only supports the pre v25 init protocol,
and show an apropriate error message. Most times the error
will already be catched at the serverlist level, the
detection mechanism only acts as last resort, because the
"Connection timed out" error message that would be shown
otherwise would be very confusing.

Automatic "fixing" of this condition is not desired,
as it would allow for downgrade attacks.

As already 161 of the 167 servers on the serverlist
support the new srp based auth protocol (> 96%),
the breakage should be minimal.

Follow up of commit

af30183124d40a969040d7de4b3a487feec466e4 "Add option to not send pre v25 init packet"

Also change the pessimistic assumption of masterlist
server versions to optimistic, in order to avoid buggy
behaviour (favourites not in the serverlist would be
denied to connect to, etc).
2016-08-22 20:23:28 +02:00
Ben Deutsch
d1df09841d Document zoom_fov in settingtypes.txt and minetest.conf.example 2016-08-10 12:18:25 +02:00
Tim
d7060c212f Builtin/profiler: Replace game profiler (#4245)
Use the setting "profiler.load" to enable profiling.
Other settings can be found in settingtypes.txt.

* /profiler print [filter] - report statistics to in-game console
* /profiler dump [filter] - report statistics to STDOUT and debug.txt
* /profiler save [format [filter]] - saves statistics to a file in your worldpath
	* txt (default) - same treetable format as used by the dump and print commands
	* csv - ready for spreadsheet import
	* json - useful for adhoc D3 visualizations
	* json_pretty - line wrapped and intended json for humans
	* lua - serialized lua table of the profile-data, for adhoc scripts
* /profiler reset - reset all gathered profile data.
	This can be helpful to discard of any startup measurements that often spike during loading or to get more useful min-values.

[filter] allows limiting the output of the data via substring/pattern matching against the modname.

Note: Serialized data structures might be subject to change with changed or added measurements.
	csv might be the most stable, due to flat structure.

Changes to the previous version include:

* Updated and extended API monitoring
* Correct calculation of average (mean) values (undistorted by idleness)
* Reduce instrumentation overhead.
* Fix crashes related to missing parameters for the future and occasional DIV/0's.
* Prevent issues caused by timetravel (overflow, timejump, NTP corrections)
* Prevent modname clashes with internal names.
* Measure each instrumentation individually and label based on registration order.
* Labeling of ABM's and LBM's for easier classification.
  Giving several ABM's or LBM's the same label will treat them as one.
  Missing labels will be autogenerated based on name or registration order.
* Configurable instrumentation and reporting. Skip e.g. builtin if you don't need it.
* Profile the profiler to measure instrumentation overhead.
2016-07-12 21:51:10 +02:00
rubenwardy
538af97d8d Remove cinematic toggle on F8
Also update cinematic mode's description to include mouse
2016-07-05 19:50:30 +02:00
est31
f649147080 Disable joysticks per default for now
It seems that various different devices register as
Joysticks on linux, and their presence has caused
lots of confusion amongst minetest users.

Therefore, disable the joystick feature.

Closes #4261
Closes #4221
2016-07-04 20:49:13 +02:00
paramat
9997e2030c Mgflat/fractal/v7/valleys: Denser 3D noise tunnels
Reduce spread from 96 to primes 61 and 67 (either side of 64)
Prime spreads help to keep 3D noise periodic features unaligned
'cave width' 0.2 to preserve tunnel width
Reduce octaves to 3 to improve network structure
2016-06-24 02:17:51 +01:00
est31
2060fd9cbe Initial Gamepad support
Adds initial ingame gamepad support to minetest.

Full Formspec support is not implemented yet and
can be added by a later change.
2016-06-03 19:42:57 +02:00
Ekdohibs
14ef2b445a Add colored text (not only colored chat).
Add documentation, move files to a proper place and avoid memory leaks.
Make it work with most kind of texts, and allow backgrounds too.
2016-05-31 17:34:29 +02:00
paramat
01a784bd11 Documentation: Remove incorrect and excessive mapgen flags text 2016-05-16 05:14:15 +01:00
paramat
8b1f8e99cf Mapgen: Make 3D noise tunnels' width settable
Correct parameter names mg_valleys to mgvalleys
Remove biome NoiseParams from MapgenValleysParams
Improve format of parameter code
2016-04-28 23:36:19 -04:00
rubenwardy
17bfe2fe5b Builtin: Add basic_privs setting 2016-04-28 07:19:07 +01:00
TriBlade9
6530ed4dd8 Add option to disable entity selectionboxes. (#3992)
Setting only loaded once, default value is to enable them.
2016-04-14 11:20:11 +02:00
paramat
630f453da4 Mgv7: Decrease cliff steepness 2016-03-30 01:53:14 +01:00
Auke Kok
c5c727d627 Allow NodeTimer, ABM and block mgmt interval changes.
ABM's are hardcoded to run every 1.0s, NodeTimers are hard coded to
run at every 1.0s. Block mgmt is running every 2.0sec.

However, these timers can be better tuned for both higher and lower
values by server owners. Some server owners want to, and have the
resources to send more packets per second to clients, and so they
may wish to send smaller updates sooner. Right now all ABM's are
coalesced into 1.0 second intervals, resulting in large send queues
to all clients. By reducing the amount of possible timers, one can
get a far better response rate and lower the perception of lag.

On the other side of the camp, some servers may want to increase
these values, which again isn't easily doable.

The global settings abm_interval and nodetimer_interval are set to
current values by default. I've tested with 0.2/0.5 type values
and noticed a greatly improved response and better scattering of
nodetimers, as well as enjoying not faceplanting into doors with
pressure plates anymore.
2016-03-19 17:56:26 +00:00
est31
af30183124 Add option to not send pre v25 init packet
The legacy init packet (pre v25) sends information about the client's
password that a server could use to log in to other servers if the
username and password are the same. All the other benefits of SRP of
protocol v25 are missed if the legacy init packet is still sent during
connection creation.

This patch adds an option to not send the v25 init packet. Not sending
the v25 packet means breaking compat with pre v25 servers, but as the
option is not enabled by default, no servers are affected unless the
user explicitly flips the switch. More than 90% of the servers on the
serverlist support post v25 protocols.

The patch also fixes a bug with greying out of non compliant servers
being done wrongly, the min and max params were mixed.
2016-03-15 17:20:09 +01:00
Diego Martinez
2c72f6da7b Add options for screenshot format and quality 2016-03-12 17:12:43 -05:00
paramat
6f325070dd Documentation: Clarify global and mapgen-specific mapgen flags 2016-03-11 21:09:59 +00:00
Muhammad Rifqi Priyo Susanto
75db0543f3 Add forgotten valleys mapgen in mapgen name
Missing `valleys` in `settingtypes.txt` and `minetest.conf.example`.
2016-03-05 16:06:27 +01:00
RealBadAngel
f9d727764f Mapblock mesh: Allow to use VBO 2016-02-26 00:51:01 +00:00
RealBadAngel
8eb7ddb0a2 Remove new_style_water 2016-02-26 00:50:46 +00:00
Jeija
31e0667a4a Add Lua interface to HTTPFetchRequest
This allows mods to perform both asynchronous and synchronous HTTP
requests. Mods are only granted access to HTTP APIs if either mod
security is disabled or if they are whitelisted in any of the
the secure.http_mods and secure.trusted_mods settings.

Adds httpfetch_caller_alloc_secure to generate random, non-predictable
caller IDs so that lua mods cannot spy on each others HTTP queries.
2016-02-22 15:39:41 +01:00
RealBadAngel
b2aabdfe07 Camera: remove auto tune FPS, single view range setting 2016-02-21 18:18:13 +01:00
RealBadAngel
2f4cf0bcca Remove preload_item_visuals code
Closes #3748
2016-02-21 17:46:50 +01:00
paramat
7e5eea9ad5 Documentation: Remove now unused 'vertical spawn range' 2016-02-11 04:23:26 +00:00
RealBadAngel
eb3840a3f8 Filmic HDR tone mapping 2016-02-09 02:55:59 -05:00
RealBadAngel
b44da4916a Cleanup selection mesh code, add shaders for halo and selection boxes 2016-02-08 03:57:42 -05:00
RealBadAngel
6cd2b3b445 Use meshes to display inventory items 2016-02-07 19:51:55 +01:00
Duane Robertson
80c7612e76 Mgvalleys: use standard caves
Replace simple caves with V5 caves, adding unpredictable water and lava
settings and massive caves based on subterrain. Remove fast terrain mode
and accompanying settings. Remove superfluous temperature/humidity
settings. Remove lava/water height setting. Fix errors in humidity
handling and remove humidity_break_point setting. Move cave noises to
generateCaves. Fix minor formatting/naming issues and use
MYMAX/MYMIN/myround.
2016-01-31 22:31:25 +00:00
Duane Robertson
3c6b2ffb10 Add Valleys mapgen. 2016-01-14 05:04:29 +00:00
paramat
3e0ea3c6ed Mgflat: Set blank default spflags. Unhide 2016-01-10 04:07:47 +00:00
Dalai Felinto
9943ae3f1a New 3D Mode: Pageflip
The pageflip mode requires a stereo quadbuffer, and a modern graphic
card. Patch tested with NVidia 3D Vision.

The mini-map is not drawn, but that's what is done for topbottom and
sidebyside modes as well.

Also most of the time the user would prefer the HUD to be off. That's
for the user to decide though, and toggle it manually.

Finally, the interocular distance (aka eye separation) is twice as much
as the "3d_paralax_strength" settings. I find this a strange design
decision. I didn't want to chance this though, since it's how the other
3d modes interpret this settings.
2016-01-09 16:52:29 +01:00
paramat
c26eb87aec Mgfractal: Add 3D and 4D fractals
3D Mandelbrot/Mandelbar
3D Christmas Tree
3D Mandelbulb
3D Cosine Mandelbulb
4D Mandelbulb
Plus corresponding julia set for each
Add credits for formulas
Rename parameter 'formula' to 'fractal'
Speed optimisations
2015-12-15 04:18:19 +00:00
est31
8e3602f694 Fix some setting documentation
* Horizontal and vertical are used wrongly. Use height and width because
	horizontal/vertical describes different things. Thanks @kilbith for pointing out.
* Update minetest.conf.example and settings_translation_file.cpp
* Correct maximum/minimum copy paste mistake.
2015-12-10 19:08:03 +01:00
paramat
c24f3b0a65 Mgfractal: Move julia set selection into formula parameter
Improve default parameters
Update and improve documentation
Unhide mapgen, but is still unstable
2015-11-23 00:34:09 +00:00
paramat
d7bbe81726 Mapgen: Add global 'decorations' flag
Flag is set by default in MapgenParams
The global 'trees' flag remains but is now
undocumented and unset by default in MapgenParams
Add mgv6_spflag 'trees' set by default in
defaultsettings.cpp to affect new worlds only
This is automatically backwards
compatible for existing worlds
2015-11-21 00:10:08 +00:00
paramat
cb7da90138 Mgfractal: Revert unnecessary duplication of parameters 2015-11-15 08:13:36 +00:00
paramat
987d6a82f6 Mgfractal: Create a choice of 4 mandelbrot formulas 2015-11-14 04:25:47 +00:00
paramat
4434498367 Mgv6: Move global mapgen flag 'flat' into mgv6 spflags
Add mgv6 spflag 'flat'
Global flag is kept for backwards compatibility but is now undocumented
2015-11-13 04:25:08 +00:00
paramat
76c9abe4c8 Mapgen: Add flat mapgen in hidden form 2015-11-11 09:37:54 +00:00
est31
9a91f58e66 Settings tab: add v3f type
Add the v3f type, currently is just a nice placeholder for string.
Currently undocumented, on wish of @PilzAdam, to support future changes.
2015-11-08 21:19:21 +01:00
paramat
2ec1eee090 Conf.example, settingtypes: Improve mgfractal documentation 2015-11-06 11:12:07 +00:00
paramat
732cabee19 Settingtypes: Correct documentation for mgfractal
Use type 'string' for v3fs and add comments
2015-11-05 00:53:39 +00:00
paramat
64049cf72a Mgfractal: Add documentation to conf.example and settingtypes 2015-11-04 05:22:55 +00:00