diff --git a/README.md b/README.md index e40ce4d..f504dbd 100644 --- a/README.md +++ b/README.md @@ -78,7 +78,7 @@ Pages addressed to `MY_RIC` (default `1234567`) flash the normal LED on GPIO13 a Edit `ric_presets[]` and `tx_message_presets[]` in `main/pager_presets.c`. The same RIC list is used for the own-RIC selector and TX destination selector. The supplied list contains `MY PAGER` (`1234567`) and an example `TEST RIC 1` (`1234568`). Replace/add entries for pagers in your test setup. -`POCSAG_TX_ENABLE` in `main/pager_config.h` is enabled. The TX screen selects a destination with Up/Down and cycles the message with Select or BOOT tap. A long hold of Select or BOOT sends one short POCSAG alpha page. Presets include `POCSAG TEST`, `HELLO FROM H2`, and a generated `SYSTEM STATE` snapshot containing frequency, detected baud, history count, and battery percentage if battery sensing is enabled. The sender limits text to 32 characters, emits three batches, sets the CC1101 PATABLE entry from `TX_PATABLE_VALUE`, pauses sampling while transmitting, restores RX afterward, and enforces a 10-second minimum interval between sends. +`POCSAG_TX_ENABLE` in `main/pager_config.h` is enabled. The TX screen selects a destination with Up/Down and cycles the message with Select or BOOT tap. A long hold of Select or BOOT sends one short POCSAG alpha page. Presets include `POCSAG TEST`, `HELLO FROM H2`, and a generated `SYSTEM STATE` snapshot containing frequency, detected baud, history count, and battery percentage if battery sensing is enabled. The sender limits text to 32 characters, emits three batches, sets the CC1101 PATABLE entry from `TX_PATABLE_VALUE` (`0xC0`, the high-power entry, nominally about +10 dBm at 433 MHz), pauses sampling while transmitting, restores RX afterward, and enforces a 10-second minimum interval between sends. ## Source Modules diff --git a/main/pager_config.h b/main/pager_config.h index a06809b..1b6d40b 100644 --- a/main/pager_config.h +++ b/main/pager_config.h @@ -34,7 +34,7 @@ #define POCSAG_TX_ENABLE 1 #define TX_MIN_INTERVAL_MS 10000U #define TX_MAX_MESSAGE_CHARS 32U -#define TX_PATABLE_VALUE 0x03U +#define TX_PATABLE_VALUE 0xC0U /* CC1101 high-power entry for the 433 MHz band */ #define TX_BATCH_COUNT 3U #define OLED_IDLE_OFF_MS 60000U