Files
pager/main/pager_config.h
T
2026-11-12 19:46:52 +01:00

58 lines
2.0 KiB
C

#pragma once
#include "driver/gpio.h"
#include "driver/gptimer.h"
#include "driver/spi_master.h"
/* Board wiring: ESP32-H2 SuperMini, CC1101, SPI SSD1306, buttons, and LEDs. */
#define SPI_HOST_USED SPI2_HOST
#define PIN_SPI_SCLK GPIO_NUM_4
#define PIN_SPI_MOSI GPIO_NUM_5
#define PIN_SPI_MISO GPIO_NUM_0
#define PIN_CC1101_CS GPIO_NUM_1
#define PIN_CC1101_GDO0 GPIO_NUM_3
#define PIN_OLED_CS GPIO_NUM_10
#define PIN_OLED_DC GPIO_NUM_11
#define PIN_OLED_RESET GPIO_NUM_12
#define PIN_BUTTON_BOOT GPIO_NUM_9
#define PIN_BUTTON_UP GPIO_NUM_6
#define PIN_BUTTON_DOWN GPIO_NUM_7
#define PIN_BUTTON_SELECT GPIO_NUM_14
#define PIN_BATTERY_ADC GPIO_NUM_2
#define PIN_STATUS_LED GPIO_NUM_13
#define PIN_NEOPIXEL GPIO_NUM_8
/* RF defaults and menu tuning range. */
#define RF_FREQ_HZ 435000000UL
#define CC1101_XTAL_HZ 26000000UL
#define TUNE_MIN_HZ 433000000UL
#define TUNE_MAX_HZ 435500000UL
#define TUNE_STEP_HZ 25000UL
#define MY_RIC 1234567UL
/* Add the test RICs you control in pager_presets.c. */
#define POCSAG_TX_ENABLE 1
#define TX_MIN_INTERVAL_MS 10000U
#define TX_MAX_MESSAGE_CHARS 32U
#define TX_PATABLE_VALUE 0xC0U /* CC1101 high-power entry for the 433 MHz band */
#define TX_BATCH_COUNT 3U
#define OLED_IDLE_OFF_MS 60000U
#define OWN_PAGE_ALERT_MS 3000U
#define RX_DISPLAY_FLASHES 4U
#define RX_DISPLAY_FLASH_MS 120U
/* Enable only with a battery divider wired BAT+ -> GPIO2 -> GND. */
#define BATTERY_MONITOR_ENABLE 0
#define BATTERY_DIVIDER_TOP_OHMS 100000U
#define BATTERY_DIVIDER_BOTTOM_OHMS 100000U
#define SAMPLE_TIMER_HZ 1000000UL
#define SAMPLE_PERIOD_TICKS 26UL
#define SAMPLE_RATE_HZ (SAMPLE_TIMER_HZ / SAMPLE_PERIOD_TICKS)
#define SAMPLE_BUF_SIZE 16384U
#define SAMPLE_BUF_MASK (SAMPLE_BUF_SIZE - 1U)
#define SPI_TRANSFER_CHUNK 64U
#define HISTORY_COUNT 8
#define MESSAGE_SIZE 160