80 lines
2.9 KiB
C
80 lines
2.9 KiB
C
#include "ccs811.h"
|
||
|
||
#define CONFIG_FREERTOS_HZ 100
|
||
|
||
i2c_device_config_t CCS811_DEV_CFG = {
|
||
.dev_addr_length = I2C_ADDR_BIT_LEN_7,
|
||
.device_address = 0x5A,
|
||
.scl_speed_hz = 100000,
|
||
};
|
||
|
||
i2c_master_dev_handle_t CCS811_DEV_HANDLE;
|
||
|
||
void ccs811_getStatus()
|
||
{
|
||
uint8_t errorID;
|
||
uint8_t status;
|
||
uint8_t hardwareVersion;
|
||
uint16_t version;
|
||
uint16_t bootVersion;
|
||
|
||
i2c_read_register_8(CCS811_DEV_HANDLE, CCS811_REG_STATUS, &status);
|
||
i2c_read_register_16(CCS811_DEV_HANDLE, CCS811_REG_FW_APP_VERSION, &version);
|
||
i2c_read_register_16(CCS811_DEV_HANDLE, CCS811_REG_FW_BOOT_VERSION, &bootVersion);
|
||
i2c_read_register_8(CCS811_DEV_HANDLE, CCS811_REG_HW_VERSION, &hardwareVersion);
|
||
i2c_read_register_8(CCS811_DEV_HANDLE, CCS811_REG_ERROR_ID, &errorID);
|
||
ESP_LOGW(TAG_CCS, "CCS811 status: %d, version: %d, boot version: %d, hardware version: %d, error ID: %d", status, version, bootVersion, hardwareVersion, errorID);
|
||
}
|
||
|
||
void ccs811_init()
|
||
{
|
||
ESP_ERROR_CHECK(i2c_master_bus_add_device(i2c0_bus_hdl, &CCS811_DEV_CFG, &CCS811_DEV_HANDLE));
|
||
mcp23018_set_pin(MCP23018_DEV_HANDLE, MCP_CCS811_WAKE, 0);
|
||
mcp23018_set_pin(MCP23018_DEV_HANDLE, MCP_CCS811_POWER, 1);
|
||
vTaskDelay(10 / portTICK_PERIOD_MS);
|
||
uint8_t reset_seq[4] = {0x11, 0xE5, 0x72, 0x8A};
|
||
i2c_write_register(CCS811_DEV_HANDLE, CCS811_REG_SW_RESET, reset_seq, sizeof(reset_seq)); // Reset
|
||
vTaskDelay(10 / portTICK_PERIOD_MS);
|
||
|
||
ccs811_getStatus();
|
||
i2c_write_register(CCS811_DEV_HANDLE, CCS811_REG_APP_START, NULL, 0); // start
|
||
vTaskDelay(10 / portTICK_PERIOD_MS);
|
||
i2c_write_register_8(CCS811_DEV_HANDLE, CCS811_REG_MEAS_MODE, 0x40); // MODE 1 interrupts vypnuté
|
||
ccs811_getStatus();
|
||
}
|
||
esp_err_t ccs811_get_data(uint16_t *eCO2, uint16_t *tvoc, uint8_t *current, uint16_t *rawData)
|
||
{
|
||
uint8_t algResultData[8];
|
||
esp_err_t ret = i2c_read_register(CCS811_DEV_HANDLE, CCS811_REG_ALG_RESULT_DATA, algResultData, 8);
|
||
|
||
if (ret == ESP_OK)
|
||
{
|
||
*eCO2 = ((uint16_t)algResultData[0] << 8) | algResultData[1];
|
||
*tvoc = ((uint16_t)algResultData[2] << 8) | algResultData[3];
|
||
*current = algResultData[6] >> 2;
|
||
*rawData = ((uint16_t)(algResultData[6] & 0x03) << 8) | algResultData[7];
|
||
|
||
ESP_LOGI(TAG_CCS, "CCS Status: %d, Error: %d", algResultData[4], algResultData[5]);
|
||
return ESP_OK;
|
||
}
|
||
|
||
return ret;
|
||
}
|
||
|
||
esp_err_t ccs811_set_env_data(float temperature, float humidity)
|
||
{
|
||
uint8_t envData[4];
|
||
|
||
// Convert humidity: %RH × 512 (rounding)
|
||
uint16_t hum_conv = (uint16_t)(humidity * 512.0f + 0.5f);
|
||
envData[0] = (hum_conv >> 8) & 0xFF;
|
||
envData[1] = hum_conv & 0xFF;
|
||
|
||
// Convert temperature: (°C + 25) × 512
|
||
uint16_t temp_conv = (uint16_t)((temperature + 25.0f) * 512.0f + 0.5f);
|
||
envData[2] = (temp_conv >> 8) & 0xFF;
|
||
envData[3] = temp_conv & 0xFF;
|
||
|
||
return i2c_write_register(CCS811_DEV_HANDLE, CCS811_REG_ENV_DATA, envData, 4);
|
||
}
|