update localization

This commit is contained in:
FaceDeer 2017-09-10 19:06:49 -06:00
parent 99420acb69
commit 97a258cf9c
2 changed files with 146 additions and 94 deletions

@ -8,7 +8,7 @@ msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2017-02-26 13:42-0700\n"
"POT-Creation-Date: 2017-09-10 19:05-0600\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
@ -321,6 +321,13 @@ msgid ""
"its output at those locations provided it is moving along the matching "
"axis.\n"
"\n"
"There is also an \"Extrusion\" setting. This allows your builder to extrude "
"a line of identical blocks from the builder output, in the direction the "
"output side is facing, until it reaches an obstruction or until it reaches "
"the extrusion limit. This can be useful for placing columns below a bridge, "
"or for filling a large volume with a uniform block type without requiring a "
"large number of builder heads.\n"
"\n"
"The \"output\" side of a builder is the side with a black crosshair on it.\n"
"\n"
"Builders also have a \"facing\" setting. If you haven't memorized the "
@ -336,13 +343,13 @@ msgid ""
"avoid this for consistent results."
msgstr ""
#: doc.lua:31
#: doc.lua:35
msgid ""
"Stores building materials for use by builder heads and materials dug up by "
"digger heads."
msgstr ""
#: doc.lua:32
#: doc.lua:36
msgid ""
"Inventory modules have the same capacity as a chest. They're used both for "
"storing the products of the digger heads and as the source of materials used "
@ -360,7 +367,7 @@ msgid ""
"capacity."
msgstr ""
#: doc.lua:41
#: doc.lua:45
msgid ""
"Digtron inventory modules are compatible with hoppers, adjacent hoppers will "
"add to or take from their inventories. Hoppers are not part of the Digtron "
@ -368,18 +375,18 @@ msgid ""
"\"docking station\" for a Digtron."
msgstr ""
#: doc.lua:47
#: doc.lua:51
msgid ""
"Inventory modules are compatible with Pipeworks blocks. When a Digtron moves "
"one of the inventory modules adjacent to a pipe it will automatically hook "
"up to it, and disconnect again when it moves on."
msgstr ""
#: doc.lua:50
#: doc.lua:54
msgid "Stores fuel to run a Digtron"
msgstr ""
#: doc.lua:51
#: doc.lua:55
msgid ""
"Digtrons have an appetite. Build operations and dig operations require a "
"certain amount of fuel, and that fuel comes from fuel hopper modules. Note "
@ -402,7 +409,7 @@ msgid ""
"\tDig 80 dirt or sand blocks"
msgstr ""
#: doc.lua:64
#: doc.lua:68
msgid ""
"Digtron fuel store modules are compatible with hoppers, adjacent hoppers "
"will add to or take from their inventories. Hoppers are not part of the "
@ -410,19 +417,19 @@ msgid ""
"a \"docking station\" for a Digtron."
msgstr ""
#: doc.lua:70
#: doc.lua:74
msgid ""
"Fuel modules are compatible with Pipeworks blocks. When a Digtron moves one "
"of the inventory modules adjacent to a pipe it will automatically hook up to "
"it, and disconnect again when it moves on."
msgstr ""
#: doc.lua:73
#: doc.lua:77
msgid ""
"Stores fuel for a Digtron and also has an inventory for building materials"
msgstr ""
#: doc.lua:74
#: doc.lua:78
msgid ""
"For smaller jobs the two dedicated modules may simply be too much of a good "
"thing, wasting precious Digtron space to give unneeded capacity. The "
@ -431,7 +438,7 @@ msgid ""
"building material capacity and 1/4 fuel storage capacity."
msgstr ""
#: doc.lua:79
#: doc.lua:83
msgid ""
"Digtron inventory modules are compatible with hoppers, adjacent hoppers will "
"add to or take from their inventories. A hopper on top of a combined "
@ -442,7 +449,7 @@ msgid ""
"may be useful for creating a \"docking station\" for a Digtron."
msgstr ""
#: doc.lua:85
#: doc.lua:89
msgid ""
"Combination modules are compatible with Pipeworks blocks. When a Digtron "
"moves one of the inventory modules adjacent to a pipe it will automatically "
@ -453,11 +460,11 @@ msgid ""
"insert items into the \"fuel\" inventory instead."
msgstr ""
#: doc.lua:90
#: doc.lua:94
msgid "An empty crate that a Digtron can be stored in"
msgstr ""
#: doc.lua:91
#: doc.lua:95
msgid ""
"Digtrons can be pushed around and rotated, and that may be enough for "
"getting them perfectly positioned for the start of a run. But once your "
@ -472,11 +479,11 @@ msgid ""
"inside it."
msgstr ""
#: doc.lua:95
#: doc.lua:99
msgid "A crate containing a Digtron array"
msgstr ""
#: doc.lua:96
#: doc.lua:100
msgid ""
"This crate contains a Digtron assembly that was stored in it earlier. Place "
"it somewhere and right-click on it to access the label text that was applied "
@ -487,11 +494,11 @@ msgid ""
"reused later."
msgstr ""
#: doc.lua:100
#: doc.lua:104
msgid "A basic controller to make a Digtron array move and operate."
msgstr ""
#: doc.lua:101
#: doc.lua:105
msgid ""
"Right-click on this module to make the digging machine go one step. The "
"digging machine will go in the direction that the control module is "
@ -504,13 +511,13 @@ msgid ""
"adjacent to it, you will be pulled along with the machine when it moves."
msgstr ""
#: doc.lua:107
#: doc.lua:111
msgid ""
"A more sophisticated controller that includes the ability to set the number "
"of cycles it will run for, as well as diagonal movement."
msgstr ""
#: doc.lua:108
#: doc.lua:112
msgid ""
"An Auto-control module can be set to run for an arbitrary number of cycles. "
"Once it's running, right-click on it again to interrupt its rampage. If "
@ -543,13 +550,13 @@ msgid ""
"cobble, not stone)."
msgstr ""
#: doc.lua:118
#: doc.lua:122
msgid ""
"A simplified controller that merely moves a Digtron around without "
"triggering its builder or digger modules"
msgstr ""
#: doc.lua:119
#: doc.lua:123
msgid ""
"Aka the \"can you rebuild it six inches to the left\" module. This is a much "
"simplified control module that does not trigger the digger or builder heads "
@ -561,11 +568,11 @@ msgid ""
"repositioning Digtrons let's say they have a built-in crane or something."
msgstr ""
#: doc.lua:123
#: doc.lua:127
msgid "A device that allows one to rotate their Digtron into new orientations"
msgstr ""
#: doc.lua:124
#: doc.lua:128
msgid ""
"This magical module can rotate a Digtron array in place around itself. Right-"
"clicking on it will rotate the Digtron 90 degrees in the direction the "
@ -575,11 +582,11 @@ msgid ""
"rotation."
msgstr ""
#: doc.lua:128
#: doc.lua:132
msgid "A standard Digtron digger head"
msgstr ""
#: doc.lua:129
#: doc.lua:133
msgid ""
"Facing of a digger head is significant; it will excavate material from the "
"block on the spinning grinder wheel face of the digger head. Generally "
@ -587,11 +594,11 @@ msgid ""
"the sides can also be useful."
msgstr ""
#: doc.lua:131
#: doc.lua:135
msgid "Two standard Digtron digger heads merged at 90 degrees to each other"
msgstr ""
#: doc.lua:132
#: doc.lua:136
msgid ""
"This digger head is mainly of use when you want to build a Digtron capable "
"of digging diagonal paths. A normal one-direction dig head would be unable "
@ -602,13 +609,13 @@ msgid ""
"Digtron, though this is generally not of practical use."
msgstr ""
#: doc.lua:136
#: doc.lua:140
msgid ""
"Two standard soft-material Digtron digger heads merged at 90 degrees to each "
"other"
msgstr ""
#: doc.lua:137
#: doc.lua:141
msgid ""
"This digger head is mainly of use when you want to build a Digtron capable "
"of digging diagonal paths. A normal one-direction dig head would be unable "
@ -622,23 +629,23 @@ msgid ""
"Digtron."
msgstr ""
#: doc.lua:143
#: doc.lua:147
msgid "A standard Digtron digger head that only triggers periodically"
msgstr ""
#: doc.lua:144
#: doc.lua:148
msgid ""
"This is a standard digger head capable of digging any material, but it will "
"only trigger periodically as the Digtron moves. This can be useful for "
"punching regularly-spaced holes in a tunnel wall, for example."
msgstr ""
#: doc.lua:146
#: doc.lua:150
msgid ""
"A standard soft-material Digtron digger head that only triggers periodically"
msgstr ""
#: doc.lua:147
#: doc.lua:151
msgid ""
"This is a standard soft-material digger head capable of digging any "
"material, but it will only trigger periodically as the Digtron moves. This "
@ -646,11 +653,11 @@ msgid ""
"example."
msgstr ""
#: doc.lua:149
#: doc.lua:153
msgid "A Digtron digger head that only excavates soft materials"
msgstr ""
#: doc.lua:150
#: doc.lua:154
msgid ""
"This specialized digger head is designed to excavate only softer material "
"such as sand or gravel. In technical terms, this digger digs blocks "
@ -665,11 +672,11 @@ msgid ""
"It can also serve as part of a lawnmower or tree-harvester."
msgstr ""
#: doc.lua:158
#: doc.lua:162
msgid "Structural component for a Digtron array"
msgstr ""
#: doc.lua:159
#: doc.lua:163
msgid ""
"These blocks allow otherwise-disconnected sections of digtron blocks to be "
"linked together. They are not usually necessary for simple diggers but more "
@ -684,11 +691,11 @@ msgid ""
"you ride your mighty mechanical leviathan through the landscape."
msgstr ""
#: doc.lua:165
#: doc.lua:169
msgid "Digtron light source"
msgstr ""
#: doc.lua:166
#: doc.lua:170
msgid ""
"A light source that moves along with the digging machine. Convenient if "
"you're digging a tunnel that you don't intend to outfit with torches or "
@ -696,53 +703,53 @@ msgid ""
"protective lens tends to get grimy while burrowing through the earth."
msgstr ""
#: doc.lua:168
#: doc.lua:172
msgid "Digtron panel"
msgstr ""
#: doc.lua:169
#: doc.lua:173
msgid ""
"A structural panel that can be made part of a Digtron to provide shelter for "
"an operator, keep sand out of the Digtron's innards, or just to look cool."
msgstr ""
#: doc.lua:171
#: doc.lua:175
msgid "Digtron edge panel"
msgstr ""
#: doc.lua:172
#: doc.lua:176
msgid ""
"A pair of structural panels that can be made part of a Digtron to provide "
"shelter for an operator, keep sand out of the Digtron's innards, or just to "
"look cool."
msgstr ""
#: doc.lua:174
#: doc.lua:178
msgid "Digtron corner panel"
msgstr ""
#: doc.lua:175
#: doc.lua:179
msgid ""
"A trio of structural panels that can be made part of a Digtron to provide "
"shelter for an operator, keep sand out of the Digtron's innards, or just to "
"look cool."
msgstr ""
#: doc.lua:179
#: doc.lua:183
msgid "Digtron"
msgstr ""
#: doc.lua:180
#: doc.lua:184
msgid ""
"The Digtron system is a set of blocks used to construct tunnel-boring and "
"construction machines."
msgstr ""
#: doc.lua:187
#: doc.lua:191
msgid "Summary"
msgstr ""
#: doc.lua:188
#: doc.lua:192
msgid ""
"Digtron blocks can be used to construct highly customizable and modular "
"tunnel-boring machines, bridge-builders, road-pavers, wall-o-matics, and "
@ -764,11 +771,11 @@ msgid ""
"edges and corners don't count."
msgstr ""
#: doc.lua:201
#: doc.lua:205
msgid "Concepts"
msgstr ""
#: doc.lua:203
#: doc.lua:207
msgid ""
"Several general concepts are important when building more sophisticated "
"diggers.\n"
@ -807,11 +814,11 @@ msgid ""
"when moving in any direction."
msgstr ""
#: doc.lua:217
#: doc.lua:221
msgid "Audio cues"
msgstr ""
#: doc.lua:219
#: doc.lua:223
msgid ""
"When a digging machine is unable to complete a cycle it will make one of "
"several noises to indicate what the problem is. It will also set its "
@ -857,11 +864,11 @@ msgid ""
"caution when opening the door to clear the obstruction."
msgstr ""
#: doc.lua:237
#: doc.lua:241
msgid "Tips and Tricks"
msgstr ""
#: doc.lua:239
#: doc.lua:243
msgid ""
"To more easily visualize the operation of a Digtron, imagine that its cycle "
"of operation follows these steps in order:\n"
@ -887,8 +894,10 @@ msgstr ""
msgid "Digtron Rotation Axle"
msgstr ""
#: node_axle.lua:57 util_execute_cycle.lua:172 util_execute_cycle.lua:365
#: util_execute_cycle.lua:454
#: node_axle.lua:57
#: util_execute_cycle.lua:172
#: util_execute_cycle.lua:367
#: util_execute_cycle.lua:456
msgid "Digtron is obstructed."
msgstr ""
@ -896,22 +905,36 @@ msgstr ""
msgid "Block to build"
msgstr ""
#: node_builders.lua:14 node_diggers.lua:32
msgid "Periodicity"
#: node_builders.lua:14
msgid "Extrusion"
msgstr ""
#: node_builders.lua:15
msgid ""
"Builder will extrude this many blocks in the direction it is facing.\n"
"Can be set from 1 to @1.\n"
"Note that Digtron won't build into unloaded map regions."
msgstr ""
#: node_builders.lua:16
#: node_diggers.lua:32
msgid "Periodicity"
msgstr ""
#: node_builders.lua:17
msgid ""
"Builder will build once every n steps.\n"
"These steps are globally aligned, so all builders with the\n"
"same period and offset will build on the same location."
msgstr ""
#: node_builders.lua:16 node_controllers.lua:91 node_diggers.lua:34
#: node_builders.lua:18
#: node_controllers.lua:91
#: node_diggers.lua:34
msgid "Offset"
msgstr ""
#: node_builders.lua:17
#: node_builders.lua:19
msgid ""
"Offsets the start of periodicity counting by this amount.\n"
"For example, a builder with period 2 and offset 0 builds\n"
@ -919,54 +942,60 @@ msgid ""
"offset 1 builds every odd-numbered block."
msgstr ""
#: node_builders.lua:18
#: node_builders.lua:20
msgid ""
"Save &\n"
"Show"
msgstr ""
#: node_builders.lua:19 node_diggers.lua:37
#: node_builders.lua:21
#: node_diggers.lua:37
msgid "Saves settings"
msgstr ""
#: node_builders.lua:20
#: node_builders.lua:22
msgid "Facing"
msgstr ""
#: node_builders.lua:21
#: node_builders.lua:23
msgid ""
"Value from 0-23. Not all block types make use of this.\n"
"Use the 'Read & Save' button to copy the facing of the block\n"
"currently in the builder output location."
msgstr ""
#: node_builders.lua:22
#: node_builders.lua:24
msgid ""
"Read &\n"
"Save"
msgstr ""
#: node_builders.lua:23
#: node_builders.lua:25
msgid ""
"Reads the facing of the block currently in the build location,\n"
"then saves all settings."
msgstr ""
#: node_builders.lua:32 node_controllers.lua:106 node_crate.lua:62
#: node_builders.lua:34
#: node_controllers.lua:106
#: node_crate.lua:62
#: node_diggers.lua:43
msgid "Help"
msgstr ""
#: node_builders.lua:33 node_controllers.lua:107 node_crate.lua:63
#: node_builders.lua:35
#: node_controllers.lua:107
#: node_crate.lua:63
#: node_diggers.lua:44
msgid "Show documentation about this block"
msgstr ""
#: node_builders.lua:38
#: node_builders.lua:40
msgid "Digtron Builder Module"
msgstr ""
#: node_builders.lua:241 node_builders.lua:255
#: node_builders.lua:279
#: node_builders.lua:294
#, lua-format
msgid "%s uses Digtron to build %s at (%d, %d, %d), displacing %s"
msgstr ""
@ -975,9 +1004,12 @@ msgstr ""
msgid "Digtron Control Module"
msgstr ""
#: node_controllers.lua:48 node_controllers.lua:200 util_execute_cycle.lua:110
#: util_execute_cycle.lua:315 util_execute_cycle.lua:392
#: util_execute_cycle.lua:503
#: node_controllers.lua:48
#: node_controllers.lua:200
#: util_execute_cycle.lua:110
#: util_execute_cycle.lua:317
#: util_execute_cycle.lua:394
#: util_execute_cycle.lua:505
#, lua-format
msgid "Heat remaining in controller furnace: %d"
msgstr ""
@ -1045,12 +1077,15 @@ msgstr ""
msgid "Stop block"
msgstr ""
#: node_controllers.lua:128 node_controllers.lua:147 node_controllers.lua:160
#: node_controllers.lua:128
#: node_controllers.lua:147
#: node_controllers.lua:160
#, lua-format
msgid "Cycles remaining: %d"
msgstr ""
#: node_controllers.lua:128 node_controllers.lua:147
#: node_controllers.lua:128
#: node_controllers.lua:147
msgid "Halted!"
msgstr ""
@ -1074,39 +1109,47 @@ msgstr ""
msgid "Digtron can't be packaged, it contains protected blocks"
msgstr ""
#: node_crate.lua:42 node_crate.lua:43
#: node_crate.lua:42
#: node_crate.lua:43
msgid "Crated Digtron"
msgstr ""
#: node_crate.lua:55 node_crate.lua:70
#: node_crate.lua:55
#: node_crate.lua:70
msgid "Digtron Name"
msgstr ""
#: node_crate.lua:56 node_crate.lua:71
#: node_crate.lua:56
#: node_crate.lua:71
msgid ""
"Save\n"
"Title"
msgstr ""
#: node_crate.lua:57 node_crate.lua:72
#: node_crate.lua:57
#: node_crate.lua:72
msgid "Saves the title of this Digtron"
msgstr ""
#: node_crate.lua:58 node_crate.lua:73
#: node_crate.lua:58
#: node_crate.lua:73
msgid ""
"Show\n"
"Blocks"
msgstr ""
#: node_crate.lua:59 node_crate.lua:74
#: node_crate.lua:59
#: node_crate.lua:74
msgid "Shows which blocks the packed Digtron will occupy if unpacked"
msgstr ""
#: node_crate.lua:60 node_crate.lua:75
#: node_crate.lua:60
#: node_crate.lua:75
msgid "Unpack"
msgstr ""
#: node_crate.lua:61 node_crate.lua:76
#: node_crate.lua:61
#: node_crate.lua:76
msgid "Attempts to unpack the Digtron on this location"
msgstr ""
@ -1195,7 +1238,8 @@ msgstr ""
msgid "Digtron Inventory Storage"
msgstr ""
#: node_storage.lua:34 node_storage.lua:190
#: node_storage.lua:34
#: node_storage.lua:187
msgid "Inventory items"
msgstr ""
@ -1203,11 +1247,12 @@ msgstr ""
msgid "Digtron Fuel Storage"
msgstr ""
#: node_storage.lua:103 node_storage.lua:192
#: node_storage.lua:103
#: node_storage.lua:189
msgid "Fuel items"
msgstr ""
#: node_storage.lua:166
#: node_storage.lua:163
msgid "Digtron Combined Storage"
msgstr ""
@ -1219,27 +1264,28 @@ msgstr ""
msgid "Digtron is adjacent to unloaded nodes."
msgstr ""
#: util_execute_cycle.lua:219
#: util_execute_cycle.lua:220
msgid "Digtron needs more fuel."
msgstr ""
#: util_execute_cycle.lua:229
#: util_execute_cycle.lua:230
msgid ""
"Digtron connected to at least one builder with no output material assigned."
msgstr ""
#: util_execute_cycle.lua:233
#: util_execute_cycle.lua:234
#, lua-format
msgid "Digtron has insufficient building materials. Needed: %s"
msgstr ""
#: util_execute_cycle.lua:302
#: util_execute_cycle.lua:304
msgid ""
"Digtron unexpectedly failed to execute one or more build operations, likely "
"due to an inventory error."
msgstr ""
#: util_execute_cycle.lua:327 util_execute_cycle.lua:515
#: util_execute_cycle.lua:329
#: util_execute_cycle.lua:517
#, lua-format
msgid "%s uses Digtron to dig %s at (%d, %d, %d)"
msgstr ""

6
locale/update.bat Normal file

@ -0,0 +1,6 @@
@echo off
setlocal ENABLEEXTENSIONS ENABLEDELAYEDEXPANSION
cd ..
set LIST=
for /r %%X in (*.lua) do set LIST=!LIST! %%X
..\intllib\tools\xgettext.bat %LIST%