That makes it easier to use partial screens, while using automatic alignment.
Default is still automatic resizing as before, thought it got changed a bit as it looked a bit strange.
Before it only set the lower-right corner, but compared to driver screensizes, so it behaved a bit strange
when the leftTop corner of the rootGuiElement was changed (different than when the rightBottom corner was set).
Could be the idea before was that only clipping matters.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6163 dfc29bdd-3216-0410-991c-e03cc46cb475
Prefer static_cast to reinterpret_cast.
Declare variables later with init values to avoid having uninitialized variables around.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6161 dfc29bdd-3216-0410-991c-e03cc46cb475
Basically behavior about that is back to how it was in Irrlicht 1.8 - not perfect, but useable.
So window still jumps a bit when dragging toolbar, but no longer outside the sreen. And it's possible again to alt+tab to other windows.
The problem was caused by a combination of FPS camera changes and that we stopped doing mouse-coordinate clipping in the Linux device in r5593.
Basically that clipping had the side-effect that the fps-camera never considered a mouse "outside" on Linux.
Now on Linux we only update after we get a mouse-event (which we still get when the mouse is outside the window).
On Windows we still grab the mouse in the camera, thought that's likely _not_ the best way to do that. Windows has some mouse-grabbing support,
and I suppose we could use that (or camera should check if that is used as it also can be set by users I think). So maybe in future this can be further improved.
Other operating systems (OSX) should behave like in 1.8 I hope, but as usual I can't test.
Also did a few minor cleanups in the camera.
- Back to using animateNode time instead of real-time. That's because that was not causing the problems I thought back then it might cause as time is only used for keyboard input and not mouse input.
- Moved updating CursorPos to the rest of the code checking CursorControl
Note: A future improvement would be to add support for systems without CursorControl object (could still use mouse-events to get it working usually).
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6142 dfc29bdd-3216-0410-991c-e03cc46cb475
Thx @Marko Mahnič for the patch (https://sourceforge.net/p/irrlicht/bugs/449)
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6135 dfc29bdd-3216-0410-991c-e03cc46cb475
Previously project file was at 3.2 which seems to no longer work with newer XCode versions.
Patch is from Maksym Hamarnyk, no testing from my side for this.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6131 dfc29bdd-3216-0410-991c-e03cc46cb475
It's never really done much in c++, was deprecated in c++11 and is reserved since c++17.
Thanks @Maksym Hamarnyk for remdinding me about this.
Note: there are few more register commands in third library .c code. It's still a valid keyword there.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6130 dfc29bdd-3216-0410-991c-e03cc46cb475
Introduced in r5818. Might be part of the OSX compile troubles.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6125 dfc29bdd-3216-0410-991c-e03cc46cb475
Thanks @Maksym Hamarnyk for sending those.
Note: More patches are needed and I can only apply, not test, this.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6123 dfc29bdd-3216-0410-991c-e03cc46cb475
The change to the scaling code caused scaling to read outside of original image memory.
Was caused because scaling step factor was based on image-sizes, but has to be based on amount of scaling steps taking (off-by-one error).
Thanks @Maksym Hamarnyk for reporting that there was some problem.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6121 dfc29bdd-3216-0410-991c-e03cc46cb475
Before it crashed when index-count wasn't a multiple of 3, now it just doesn't create the last triangle then.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6110 dfc29bdd-3216-0410-991c-e03cc46cb475
This changes the behaviour on Win32 somewhat when Windows returned a CURSOR_SUPPRESSED state (touch-screen input hiding cursor globally).
Previously we set IsVisible it to false when CURSOR_SUPPRESSED was set.
Also we handle the CURSOR_SUPPRESSED state slightly different now and still try to hide cursors once when requested.
Reason for the change is that the old behaviour made it harder to recover from touch-screens hiding the cursor because Irrlicht didn't
know anymore which state is _should_ have. This also unifies the behaviour on all drivers as the other drivers already returned the visible
flag independent of the system being able to actually show the cursor.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6109 dfc29bdd-3216-0410-991c-e03cc46cb475
UI and scenenodes are often connected. And while it was possible to work around this already by using custom draw functions
or deriving from gui and scene-nodes at the same time, it did already lead a few times to uglier code for me.
So I guess adding one more pass to the engine has it's uses.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6107 dfc29bdd-3216-0410-991c-e03cc46cb475
- 10 year anniversary update
- Lighting model reworked. moved to eyespace like openGL. [Specular Highlights, Fog, Sphere/Reflection Map]
- increased internal s4DVertex to support 4 Textures and 4 Colors [switchable]
- Textures are handled as sRGB during Mipmap Generation. More accurate, less visual disruption
- 2D is drawn as 3D like hardware drivers. [switchable]. enables viewport scaling, material2D
- Texture Spatial Resolution Limiting working. [lower memory consumption,SOFTWARE_DRIVER_2_TEXTURE_MAXSIZE]
- SuperTuxKart 8.0.1 playable
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6086 dfc29bdd-3216-0410-991c-e03cc46cb475
Sorry, just a hack to make it easier to work around Irrlicht :-(
Would be nice to have a general mechanism to load native gl functions in Irrlicht from apps...
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6074 dfc29bdd-3216-0410-991c-e03cc46cb475
65536th vertex has index 65535 which is still fine, was going 1 too low in last commit.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6053 dfc29bdd-3216-0410-991c-e03cc46cb475
Those are not supported by any graphic card and we just end up with invalid textures.
Returning 0 now instead in addRenderTargetTexture for OpenGL and D3D9.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6047 dfc29bdd-3216-0410-991c-e03cc46cb475
Having too many warnings makes it harder to see real warnings.
I know the idea to keep those around was to have them as reminder to work on those.
But going over the formats here - it just doesn't make sense in most cases.
And for the rest (like we could add converts from R8 or so) no-one is going to work on it until someone concretely needs it anyway.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6046 dfc29bdd-3216-0410-991c-e03cc46cb475
Unlikely we ever support conversions with compressed image format.
Define is a bit ugly I guess, but nicest way I could think off.
Can probably be used in some image writers as well, have to check which support/don't support compressed formats first.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6042 dfc29bdd-3216-0410-991c-e03cc46cb475
Interestingly those can be suppressed with simple comments.
Note that I didn't suppress those in zlib code yet as I'll check for updates for those libs before releasing (while we are pretty much stuck with this AES version unless we put in a lot more work).
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6040 dfc29bdd-3216-0410-991c-e03cc46cb475
The way this was implemented BlendFactor and MaterialTypeParam could conflict otherwise as they both send the blend functions.
We could probably rewrite all places which use EMT_ONETEXTURE_BLEND+MaterialTypeParam to additionally check for BlendFactor, but it would still set the blend-functions twice.
I'm not sure if BlendFactor works with 2D materials currently? (but we can't set those to shaders yet anyway except in the gles branch...).
I've also started documenting a few things about how I suppose it's working, I hope I got it all right.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6034 dfc29bdd-3216-0410-991c-e03cc46cb475
Fix bug that AnimatedMeshSceneNode ignored ReadOnlyMaterials flag when checking materials for transparent render passes.
Make IVideoDriver::getMaterialRenderer const.
Fix bugs in COctreeSceneNode, CMeshSceneNode and CAnimatedMeshSceneNode where check for transparency in OnRegisterSceneNode() and in render() where no longer identical (those got added after Irrlicht 1.8).
Some notes for future:
- Maybe we should have a getRenderPass instead of just needsTransparentRenderPass, but this way the code didn't need so much changes and behaves (aside from fixes) pretty much as before.
- Still wondering if the default implementation in CNullDriver::needsTransparentRenderPass should always return false when SMaterial.ZWriteEnable is set to EZW_ON.
This might be nicer with another material flag. Thought then we might want a material enum to choose the renderpass and that's more work.
And we get some recursion as needsTransparentRenderPass might want to check result of getWriteZBuffer which calls needsTransparentRenderPass, so we might need a second function or an additional flag there.
But return false when SMaterial.ZWriteEnable == EZW_ON could still be done as EZW_ON is a new flag so existing behavior shouldn't break. I just don't know right now if having an extra render pass for transparent nodes might still make sense even when zbuffer is not written or if that's really the only reason to do that. Any feedback anyone?
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6033 dfc29bdd-3216-0410-991c-e03cc46cb475
This breaks compiling. To have old values replace false with EZW_OFF and true with EWZ_AUTO.
There's a bit history to this change. ZWriteFineControl got introduced after 1.8 so it was never in a released version.
Basically it was needed after some changes had been made to allow shaders to have zwrite enabled independent
of the material-type (which worked badly for shaders). This had caused other problems as it was then enabled too often instead.
So to quickly fix those bugs and avoid breaking compatibility I had introduced a new enum ZWriteFineControl in SMaterial.
This worked and didn't break compiling - but I noticed by now that introducing a second flag for this made maintainance for an already
very hard to understand problem (figuring out the implementation of transparency and zwriting) even more complicated.
So to keep maintance somewhat sane I decided to break compiling now and merge those two flags.
The behavior should not be affected by this commit - except for users which set this flag already in their code and have to switch to the enum now.
Serialization is switched on loading old files (so SMaterial has enum already and writes that out).
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6026 dfc29bdd-3216-0410-991c-e03cc46cb475
Before OpenGL used GL_SPHERE_MAP instead of GL_REFLECTION_MAP in COpenGLMaterialRenderer.
Not sure why, but documentation mentioned GL not being implemented, so maybe it was forgotten?
Or maybe I'm missing something as this was a big too easy to fix :-)
Anyway - I tested it and with that change they seem to look now identical to the D3D9 version, so I think it's fine.
Obviously means whoever used the material before on OpenGL has now a changed material.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6014 dfc29bdd-3216-0410-991c-e03cc46cb475
To avoid changing burnings now those functions have no IRRLICHT_FAST_MATH anymore,
there's a new header irrMathFastCompat.h which has ..._fast functions doing the old behavior.
With the troubles they have documented.
I changed burnings to use those functions throughout.
Or as much as possible... Burnings probably also uses classes like SColor which also have functions
using those, but I don't plan to adapt them.
Maybe IRRLICHT_FAST_MATH should be a flag exlusive to burnings in the future, I don't think it makes
much sense otherwise anymore (it often expects 32-bit asm).
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6012 dfc29bdd-3216-0410-991c-e03cc46cb475
That function just returned true for years not doing anything.
As far as I can see from the web it's about some rare cases in DOS compatibility mode with 32-bit apps.
But not sure why it was called exactly in this place in the past.
So no comments, no idea what it's about and not actually doing anything and probably not needed on any platform anyone still uses ... lets just kick it out.
(it did break compiling IRRLICHT_FAST_MATH on x64 which is why I noticed it)
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6009 dfc29bdd-3216-0410-991c-e03cc46cb475
Single inserts/removes per device creating/destruction, but searchs on every event. Arrays are better for that than lists.
Also document a bit.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6004 dfc29bdd-3216-0410-991c-e03cc46cb475
I suspect we could also get rid of the EnvMap list, not sure what that is about.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6003 dfc29bdd-3216-0410-991c-e03cc46cb475
