Mostly const fixes in headers to make it easier for users to have more warnings enabled in static code analysis
Also updating our own rules a bit (kicking some out we won't need yet).
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6583 dfc29bdd-3216-0410-991c-e03cc46cb475
Double tessellation numbers for these 3 functions in your code to get same results as in Irrlicht 1.8
I noticed in last commit those all tessellated semi-circles instead of circles. I just documented it there, but it's annoying as that bug doesn't allow odd numbered tessellation. So for example one couldn't create a triangle pyramid.
I considered adding another parameter to describe what this number means, but... just too ugly. And it was always documented otherwise, so this could be considered a bug. Sorry if this changes the look of existing apps.
Also cleaned up code in CGeometryCreator::createCylinderMesh. No idea what the idea behind old code was. Aside from creating twice the tessellation numbers.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6581 dfc29bdd-3216-0410-991c-e03cc46cb475
Thanks @randomMesh for reporting that they were missing: https://irrlicht.sourceforge.io/forum/viewtopic.php?p=307308
Also simplified that code a bit (same could probably also be done for createCylinderMesh, but too lazy right now)
Changed also UV's for top/bottom center vertex in CGeometryCreator::createCylinderMesh to use center for X (slight improvement, but would have to copy vertices to make it better)
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6580 dfc29bdd-3216-0410-991c-e03cc46cb475
CTriangleSelector constructor with IAnimatedMeshSceneNode parameter didn't initialize MeshBuffer.
Not used internally, so no big problem, but it got passed back to users in some cases
Replaced SCollisionTriangleRange, by CTriangleSelector::SBufferTriangleRange. Was a bad idea to use a struct which is for something else just because some member were the same (my fault, sorry).
Also started unifying the case of using ranges vs not using them.
Can maybe even get rid of the non-ranges case in future. Or unify the duplicated code for getting triangles at least.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6579 dfc29bdd-3216-0410-991c-e03cc46cb475
If we already know we start with an identity matrix (which is usually the case) then copy will do.
Also unifying code to create matrix of different CTriangleSelector::getTriangles functions
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6578 dfc29bdd-3216-0410-991c-e03cc46cb475
So far it only used the inverse of the node transformation to calculate the box used to check
Which gave wrong results as soon as one tried to pass an additional matrix transformation
Wasn't ever used internally or by examples in Irrlicht, so I guess no one ever noticed (also in some cases this still worked accidentally).
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6577 dfc29bdd-3216-0410-991c-e03cc46cb475
Same as most elements. Other behaviour a bit unexpected and unlikely to be useful.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6576 dfc29bdd-3216-0410-991c-e03cc46cb475
Sometimes you only think about better implementations when the work is done *sigh*
Can get back to it when we add custom sorting for solid nodes some day (another very old open feature request...)
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6575 dfc29bdd-3216-0410-991c-e03cc46cb475
Adding 2 algorithms to sort by distance to camera plane instead of camera position.
This is better in quite a few situations and extra cost is just one vector subtraction per node and an additional function parameter per call, I think that's worth it. So made the camera-plane to object-center now the new default.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6573 dfc29bdd-3216-0410-991c-e03cc46cb475
Until last summer we sorted by object origin to camera distance
Since then we used nearest transformed bbox-extent to camera.
I've now added an enum to allow switching those plus 2 new:
- none (so sorting based on scenegraph instead)
- object center to camera. Which I made the new default as it worked the best in my tests.
I already experimented with a few more ones like different sphere sizes (bbox radius, minimal inbound radius, maximal inbound radius) around center or origin to handle objects with different sizes, but that just gave worse results for all my test cases.
Likely algorithms we should still try:
- Collision point with bounding-box in line between camera and object center (sounds a bit slow, but maybe worth it)
- Distance to camera plane (instead of camera position). But needs additional parameter to distance functions first (maybe normalized view vector will do). That should be useful when working with planar objects.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6572 dfc29bdd-3216-0410-991c-e03cc46cb475
A bit annoying that it kinda has the opposite meaning for png and jpg compression for same parameter (png compression goes up, jpg goes down).
Also unfortunate we chose u32 instead of int here or we could at least use the usual zlib value range for png.
But I think it still won't mess up in many cases. Defaults (value 0) stay the same as before.
And setting a jpg range <= 10 is rarely done and even if so it just changes png sizes a bit now if people use writer for both.
People just have to be careful now when they override defaults for png and then also write jpg - but can't help it.
And it's too useful to not have this - this can massively change the write-speed for png's (like up to 3 times faster with no compression on my system).
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6570 dfc29bdd-3216-0410-991c-e03cc46cb475
This can't work as on deserialize it would need to have the type for IUserData already.
And that's impossible with the way it's used right now.
Would need some kind of factory or so probably, but I'll ignore this for now.
Note that it's still possible to call some serialization manually on the derived classes by adding it there if needed.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6568 dfc29bdd-3216-0410-991c-e03cc46cb475
Irrlicht generally avoided user pointers in the past, but after trying all kind of ugly workarounds - this is just easier and
not that much downsides really. Tiny speed costs due to additional SMaterial memory size and new comparison tests.
But allows to keep SMaterial alive and useful for a while longer without needing a complete rewrite and it can now be used for stuff like writing PBR shaders.
Using a new interface io::IUserData for this which also allows serialization the user data (that part is untested so far, sorry)
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6567 dfc29bdd-3216-0410-991c-e03cc46cb475
As Blender docs describe it so nicely: Using lens shift is equivalent to rendering an image with a larger FOV and cropping it off-center.
This can be quite useful for architecture renderings, but I guess also has it's use in other situations.
Note: Didn't make the ICameraSceneNode functions pure virtual so users don't have to update their cameras for this
Also some change in serialization - same as in other places by now, do use existing values as defaults values when they are not found instead of resetting them to 0.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6565 dfc29bdd-3216-0410-991c-e03cc46cb475
Returns now getMipMapsData instead which for now will always be 0 in this case (but might work one day)
Also removing comment about ITexture::lock() mipmapLevel parameter being broken. It got fixed in November 2019.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6563 dfc29bdd-3216-0410-991c-e03cc46cb475
Previously we handled all sizes as unsigned, but Windows BMP files can have negative height to signal top-down images.
No clue about left-right (would be trivial to swap as well, but found no info so far if that would be correct)
Also casting away some new compile warning in gcc for COBJMeshFileLoader
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6558 dfc29bdd-3216-0410-991c-e03cc46cb475
Caused by recent patches for 1.8 - which still had different parameter types in IReadFile::read
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6557 dfc29bdd-3216-0410-991c-e03cc46cb475
All about bounds checks and preventing buffer overruns in b3d and obj files based on sfan5 patches for Minetest
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6554 dfc29bdd-3216-0410-991c-e03cc46cb475
Thanks @sfan5 for report and patch
Was part of the Minetest commit 80e1609 patch which was applied earlier
(couldn't apply this with the rest as the rest could be fixed in Irrlicht 1.8, while this one is about new Irrlicht 1.9 code)
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6548 dfc29bdd-3216-0410-991c-e03cc46cb475
Image size calculation could overflow s32 in one place (but not others where it was done correct), which first lead to wrong amount of memory getting allocated for image data and later crash in the CColorConverter.
Thanks @sfan5 for his fuzzing tests @https://github.com/minetest/irrlicht/issues/236
and @erlehmann for passing them on: https://irrlicht.sourceforge.io/forum/viewtopic.php?t=52925
Also updating changes.txt with TGA loader changes from this and previous commits.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6535 dfc29bdd-3216-0410-991c-e03cc46cb475
From sfan5's fuzzing test reported in Minetest here: https://github.com/minetest/irrlicht/issues/236
Was missing test if it writes beyond allocated memory which can be triggered by TGA's which lie in their RLE data.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6534 dfc29bdd-3216-0410-991c-e03cc46cb475
Was creating 16-bit images for those before.
Could also support 24-bit images, but either we need another convert function or another palette for that (the 16 and 32 bit both work with 32 bit palettes, the 24 bit conversion function only with 24 bit palettes)
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6533 dfc29bdd-3216-0410-991c-e03cc46cb475
TGA's can claim to use less palette colors than they later do.
We only support 8-bit palettes, so to make this safer lets just always allocate at least 256 bytes.
Thanks @erlehmann for report and testcase: https://irrlicht.sourceforge.io/forum/viewtopic.php?p=307191
Based on Minetest bug report: https://github.com/minetest/irrlicht/issues/236
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6532 dfc29bdd-3216-0410-991c-e03cc46cb475
No reason to not have several times faster build-times
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6529 dfc29bdd-3216-0410-991c-e03cc46cb475
Removing includes which were not needed by headers
Note that if you include those headers directly (instead of including irrlicht.h) you may have to add some new includes now.
Thought I generally tried to avoid removing headers where it leads to too much changes in user-code
Reason was mainly that IntelliSense in VisualStudio 17.7 added a new feature which shows those unused headers :)
Has to be used a bit careful as it doesn't know about defines and other platforms
And I only did clean up public headers so far (will probably do some more later or another time)
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6524 dfc29bdd-3216-0410-991c-e03cc46cb475
Note: Due to OSX always failing merge OSX it's rather applying a second patch
from Ryan Schmidt from bugreport #462 to trunk
(Not sure why svn merging always fails for OSX. Probably related to MacOSX files getting moved in the past. Was that done without svn move commands? I guess that can't be fixed anymore now)
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6521 dfc29bdd-3216-0410-991c-e03cc46cb475
Note that 6514 couldn't be merged as the xcode project seems to have been rewritten and the irrFramework-Info.plist no longer exists in trunk.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6516 dfc29bdd-3216-0410-991c-e03cc46cb475
Note those were mostly backport, so trunk already had most changes.
Also we've not merged all from 1.8 branch, will need another merge (backports tend to cause lots of ugly conflicts, so have to split this a bit)
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6515 dfc29bdd-3216-0410-991c-e03cc46cb475
Did no longer render nodes which were rendered in SceneManager + outside SceneManager if they didn't have the per-buffer-rendering enabled.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6491 dfc29bdd-3216-0410-991c-e03cc46cb475
Wasn't ever used by anything and not that well defined anyway.
So they all just passed it on to the drivers. And then sometimes the driver version was called and sometimes the IMaterialRendererServices version. So now everything just calls the driver - all places which need it have access to the driver anyway. Also made the driver version non-virtual for now. If someone actually really needs this for some reason I can add it back as virtual function directly in IVideoDriver. But I doubt it - the interface was hardly accessible until recently and originally only meant for internal stuff.
GLES version still to do, but checked them earlier and they also just do nothing with it.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6486 dfc29bdd-3216-0410-991c-e03cc46cb475
So far SceneManager always sorted Nodes per render stage.
Now we allow sorting per mesh-buffer per render stage by creating a new node for each mesh-buffer.
It's only supported for CMeshSceneNode so far.
This allows to enable better transparency sorting for meshes which have transparent buffers.
Previously those always got rendered in the order in which they got added and ignored mesh-buffer bounding-boxes, but just used the bbox of the full mesh. Now they can use the bbox for each meshbuffer which can sometimes avoid render errors.
Also depending on the scene this can be quite a bit faster because it can help reduce texture changes. We sort solid nodes per texture, but only per node. So nodes with several textures had a texture switch between rendering each meshbuffer. And those are rather expensive in Irrlicht right now (and we support no bindless textures yet...)
Lastly it's now also used to buffer the render-stage. Checking this twice (once in registering the node and once in render) constantly showed up in the profiler. Which was a bit surprising really, but anyway - now it's gone.
I tried to keep it working for all cases we had before (all kind of situations, like when people may want to call render() outside the SceneManager). But not (yet) supporting the case of changing the meshbuffers (adding or removing some) without calling setMesh() again. Reason is that this wasn't well supported before either (node materials never updated). So for now I just assume people will call setMesh() again when they change the mesh.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6483 dfc29bdd-3216-0410-991c-e03cc46cb475
