mirror of
https://github.com/minetest/minetest.git
synced 2024-11-27 01:53:45 +01:00
Mgvalleys: use standard caves
Replace simple caves with V5 caves, adding unpredictable water and lava settings and massive caves based on subterrain. Remove fast terrain mode and accompanying settings. Remove superfluous temperature/humidity settings. Remove lava/water height setting. Fix errors in humidity handling and remove humidity_break_point setting. Move cave noises to generateCaves. Fix minor formatting/naming issues and use MYMAX/MYMIN/myround.
This commit is contained in:
Duane Robertson
paramat
parent
83583aa2d5
commit
80c7612e76
@ -1043,25 +1043,21 @@ mgfractal_np_cave2 (Mapgen fractal cave2 noise parameters) noise_params 0, 12, (
|
||||
# Flags that are not specified in the flag string are not modified from the default.
|
||||
# Flags starting with "no" are used to explicitly disable them.
|
||||
# "altitude_chill" makes higher elevations colder, which may cause biome issues.
|
||||
# "fast" produces softer terrain, more quickly
|
||||
# "humid_rivers" modifies the humidity around rivers and in areas where water would tend to pool. It may interfere with delicately adjusted biomes.
|
||||
# "rugged" and "cliffs" do nothing unless "fast" is enabled
|
||||
mg_valleys_spflags (Valleys C Flags) flags altitude_chill,cliffs,humid_rivers,nofast,rugged altitude_chill,noaltitude_chill,cliffs,nocliffs,fast,nofast,humid_rivers,nohumid_rivers,rugged,norugged
|
||||
mg_valleys_spflags (Valleys C Flags) flags altitude_chill,humid_rivers altitude_chill,noaltitude_chill,humid_rivers,nohumid_rivers
|
||||
|
||||
# The altitude at which temperature drops by 20C
|
||||
mg_valleys_altitude_chill (Altitude Chill) int 90
|
||||
|
||||
# Average humidity
|
||||
mg_valleys_humidity (Humidity) int 50
|
||||
# Depth below which you'll find large caves.
|
||||
mg_valleys_large_cave_depth (Large cave depth) int -33
|
||||
|
||||
# The highest humidity around rivers in otherwise dry areas
|
||||
mg_valleys_humidity_break_point (Humidity Break) int 65
|
||||
# Creates unpredictable lava features in caves.
|
||||
# These can make mining difficult. Zero disables them. (0-10)
|
||||
mg_valleys_lava_features (Lava Features) int 0
|
||||
|
||||
# Maximum altitude where lava can emerge
|
||||
mg_valleys_lava_max_height (Lava Height) int 0
|
||||
|
||||
# Maximum altitude where water occurs in caves (and tends to fall out)
|
||||
mg_valleys_cave_water_max_height (Cave Water Height) int 31000
|
||||
# Depth below which you'll find massive caves.
|
||||
mg_valleys_massive_cave_depth (Massive cave depth) int -256
|
||||
|
||||
# How deep to make rivers
|
||||
mg_valleys_river_depth (River Depth) int 4
|
||||
@ -1069,33 +1065,28 @@ mg_valleys_river_depth (River Depth) int 4
|
||||
# How wide to make rivers
|
||||
mg_valleys_river_size (River Size) int 5
|
||||
|
||||
# Average temperature
|
||||
mg_valleys_temperature (Temperature) int 50
|
||||
|
||||
# How often water occurs in caves (0-10)
|
||||
mg_valleys_water_features (Water Features) int 3
|
||||
# Creates unpredictable water features in caves.
|
||||
# These can make mining difficult. Zero disables them. (0-10)
|
||||
mg_valleys_water_features (Water Features) int 0
|
||||
|
||||
# Noise parameters
|
||||
[****Noises]
|
||||
|
||||
# Cliff noise
|
||||
mg_valleys_np_cliffs (Cliffs) noise_params 0, 1, (750, 750, 750), 8445, 5, 1.0, 2.0
|
||||
# Caves and tunnels form at the intersection of the two noises
|
||||
mg_valleys_np_cave1 (Cave noise #1) noise_params 0, 12, (100, 100, 100), 52534, 4, 0.5, 2.0
|
||||
|
||||
# Mountain corrugation
|
||||
mg_valleys_np_corr (Corrugation) noise_params 0, 1, (40, 40, 40), -3536, 4, 1.0, 2.0
|
||||
# Caves and tunnels form at the intersection of the two noises
|
||||
mg_valleys_np_cave2 (Cave noise #2) noise_params 0, 12, (100, 100, 100), 10325, 4, 0.5, 2.0
|
||||
|
||||
# The depth of dirt or other filler
|
||||
mg_valleys_np_filler_depth (Filler Depth) noise_params 0, 1.2, (256, 256, 256), 1605, 3, 0.5, 2.0
|
||||
|
||||
# Massive caves form here.
|
||||
mg_valleys_np_massive_caves (Massive cave noise) noise_params 0, 1, (768, 256, 768), 59033, 6, 0.63, 2.0
|
||||
|
||||
# River noise -- rivers occur close to zero
|
||||
mg_valleys_np_rivers (River Noise) noise_params 0, 1, (256, 256, 256), -6050, 5, 0.6, 2.0
|
||||
|
||||
# Caves and tunnels form at the intersection of the two noises
|
||||
mg_valleys_np_simple_caves_1 (Simple Caves #1) noise_params 0, 1, v3f(64, 64, 64), -8402, 3, 0.5, 2.0
|
||||
|
||||
# Caves and tunnels form at the intersection of the two noises
|
||||
mg_valleys_np_simple_caves_2 (Simple Caves #2) noise_params 0, 1, v3f(64, 64, 64), 3944, 3, 0.5, 2.0
|
||||
|
||||
# Base terrain height
|
||||
mg_valleys_np_terrain_height (Terrain Height) noise_params -10, 50, (1024, 1024, 1024), 5202, 6, 0.4, 2.0
|
||||
|
||||
|
||||
@ -1315,31 +1315,28 @@
|
||||
|
||||
#### Mapgen Valleys
|
||||
|
||||
#mg_valleys_spflags = altitude_chill,cliffs,humid_rivers,nofast,rugged
|
||||
#mg_valleys_spflags = altitude_chill,humid_rivers
|
||||
# "altitude_chill" makes higher elevations colder, which may cause biome issues.
|
||||
# "fast" produces softer terrain, more quickly
|
||||
# "humid_rivers" modifies the humidity around rivers and in areas where water would tend to pool. It may interfere with delicately adjusted biomes.
|
||||
# "rugged" and "cliffs" do nothing unless "fast" is enabled
|
||||
#
|
||||
#mg_valleys_altitude_chill = 90 # the altitude at which temperature drops by 20C
|
||||
#mg_valleys_cave_water_max_height = 31000 # max altitude of water in caves
|
||||
#mg_valleys_humidity = 50 # the average humidity
|
||||
#mg_valleys_humidity_break_point = 65 # The highest humidity around rivers in otherwise dry areas
|
||||
#mg_valleys_lava_max_height = 0 # maximum altitude of lava
|
||||
#mg_valleys_large_cave_depth = -33 # Depth below which you'll find large caves.
|
||||
#mg_valleys_lava_features = 0 # Creates unpredictable lava features in caves. These can make mining difficult. Zero disables them. (0-10)
|
||||
#mg_valleys_massive_cave_depth = -256 # Depth below which you'll find massive caves.
|
||||
#mg_valleys_river_depth = 4 # how deep to make rivers
|
||||
#mg_valleys_river_size = 5 # how wide to make rivers
|
||||
#mg_valleys_temperature = 50 # the average temperature
|
||||
#mg_valleys_water_features = 3 # how often water occurs in caves (0-10)
|
||||
#mg_valleys_water_features = 0 # Creates unpredictable water features in caves. These can make mining difficult. Zero disables them. (0-10)
|
||||
#
|
||||
#mg_valleys_np_cliffs = 0, 1, (750, 750, 750), 8445, 5, 1.0, 2.0
|
||||
#mg_valleys_np_corr = 0, 1, (40, 40, 40), -3536, 4, 1.0, 2.0
|
||||
#mg_valleys_np_filler_depth = 0, 1.2, (256, 256, 256), 1605, 3, 0.5, 2.0
|
||||
#
|
||||
# River noise -- rivers occur close to zero
|
||||
#mg_valleys_np_rivers = 0, 1, (256, 256, 256), -6050, 5, 0.6, 2.0
|
||||
#
|
||||
#mg_valleys_np_simple_caves_1 = 0, 1, v3f(64, 64, 64), -8402, 3, 0.5, 2.0
|
||||
#mg_valleys_np_simple_caves_2 = 0, 1, v3f(64, 64, 64), 3944, 3, 0.5, 2.0
|
||||
# Caves and tunnels form at the intersection of the two noises
|
||||
#mg_valleys_np_cave1 = 0, 12, (100, 100, 100), 52534, 4, 0.5, 2.0
|
||||
#mg_valleys_np_cave2 = 0, 12, (100, 100, 100), 10325, 4, 0.5, 2.0
|
||||
#
|
||||
#mg_valleys_np_massive_caves = 0, 1, (768, 256, 768), 59033, 6, 0.63, 2 # Massive caves form here.
|
||||
#
|
||||
# Base terrain height
|
||||
#mg_valleys_np_terrain_height = -10, 50, (1024, 1024, 1024), 5202, 6, 0.4, 2.0
|
||||
|
||||
@ -6,7 +6,7 @@ Copyright (C) 2016 Duane Robertson <duane@duanerobertson.com>
|
||||
|
||||
Based on Valleys Mapgen by Gael de Sailly
|
||||
(https://forum.minetest.net/viewtopic.php?f=9&t=11430)
|
||||
and mapgen_v7 by kwolekr and paramat.
|
||||
and mapgen_v7, mapgen_flat by kwolekr and paramat.
|
||||
|
||||
Licensing changed by permission of Gael de Sailly.
|
||||
|
||||
@ -25,7 +25,6 @@ with this program; if not, write to the Free Software Foundation, Inc.,
|
||||
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
||||
*/
|
||||
|
||||
|
||||
#include "mapgen.h"
|
||||
#include "voxel.h"
|
||||
#include "noise.h"
|
||||
@ -43,6 +42,8 @@ with this program; if not, write to the Free Software Foundation, Inc.,
|
||||
#include "mg_ore.h"
|
||||
#include "mg_decoration.h"
|
||||
#include "mapgen_valleys.h"
|
||||
#include "cavegen.h"
|
||||
|
||||
|
||||
//#undef NDEBUG
|
||||
//#include "assert.h"
|
||||
@ -56,10 +57,7 @@ with this program; if not, write to the Free Software Foundation, Inc.,
|
||||
|
||||
static FlagDesc flagdesc_mapgen_valleys[] = {
|
||||
{"altitude_chill", MG_VALLEYS_ALT_CHILL},
|
||||
{"cliffs", MG_VALLEYS_CLIFFS},
|
||||
{"fast", MG_VALLEYS_FAST},
|
||||
{"humid_rivers", MG_VALLEYS_HUMID_RIVERS},
|
||||
{"rugged", MG_VALLEYS_RUGGED},
|
||||
{NULL, 0}
|
||||
};
|
||||
|
||||
@ -82,28 +80,31 @@ MapgenValleys::MapgenValleys(int mapgenid, MapgenParams *params, EmergeManager *
|
||||
this->heatmap = NULL;
|
||||
this->humidmap = NULL;
|
||||
|
||||
this->map_gen_limit = MYMIN(MAX_MAP_GENERATION_LIMIT,
|
||||
g_settings->getU16("map_generation_limit"));
|
||||
|
||||
MapgenValleysParams *sp = (MapgenValleysParams *)params->sparams;
|
||||
this->spflags = sp->spflags;
|
||||
|
||||
this->cliff_terrain = (spflags & MG_VALLEYS_CLIFFS);
|
||||
this->fast_terrain = (spflags & MG_VALLEYS_FAST);
|
||||
this->humid_rivers = (spflags & MG_VALLEYS_HUMID_RIVERS);
|
||||
this->rugged_terrain = (spflags & MG_VALLEYS_RUGGED);
|
||||
this->use_altitude_chill = (spflags & MG_VALLEYS_ALT_CHILL);
|
||||
|
||||
this->altitude_chill = sp->altitude_chill;
|
||||
this->cave_water_max_height = sp->cave_water_max_height;
|
||||
this->humidity_adjust = sp->humidity - 50.f;
|
||||
this->humidity_break_point = sp->humidity_break_point;
|
||||
this->lava_max_height = sp->lava_max_height;
|
||||
this->river_depth = sp->river_depth + 1.f;
|
||||
this->river_size = sp->river_size / 100.f;
|
||||
this->temperature_adjust = sp->temperature - 50.f;
|
||||
this->water_features = MYMAX(1, MYMIN(11, 11 - sp->water_features));
|
||||
this->humidity_adjust = params->np_biome_humidity.offset - 50.f;
|
||||
this->large_cave_depth = sp->large_cave_depth;
|
||||
this->lava_features_lim = rangelim(sp->lava_features, 0, 10);
|
||||
this->massive_cave_depth = sp->massive_cave_depth;
|
||||
this->river_depth_bed = sp->river_depth + 1.f;
|
||||
this->river_size_factor = sp->river_size / 100.f;
|
||||
this->water_features_lim = rangelim(sp->water_features, 0, 10);
|
||||
|
||||
// a small chance of overflows if the settings are very high
|
||||
this->cave_water_max_height = water_level + MYMAX(0, water_features_lim - 6) * 50;
|
||||
this->lava_max_height = water_level + MYMAX(0, lava_features_lim - 6) * 50;
|
||||
|
||||
tcave_cache = new float[csize.Y + 2];
|
||||
|
||||
//// 2D Terrain noise
|
||||
noise_cliffs = new Noise(&sp->np_cliffs, seed, csize.X, csize.Z);
|
||||
noise_corr = new Noise(&sp->np_corr, seed, csize.X, csize.Z);
|
||||
noise_filler_depth = new Noise(&sp->np_filler_depth, seed, csize.X, csize.Z);
|
||||
noise_inter_valley_slope = new Noise(&sp->np_inter_valley_slope, seed, csize.X, csize.Z);
|
||||
noise_rivers = new Noise(&sp->np_rivers, seed, csize.X, csize.Z);
|
||||
@ -111,15 +112,11 @@ MapgenValleys::MapgenValleys(int mapgenid, MapgenParams *params, EmergeManager *
|
||||
noise_valley_depth = new Noise(&sp->np_valley_depth, seed, csize.X, csize.Z);
|
||||
noise_valley_profile = new Noise(&sp->np_valley_profile, seed, csize.X, csize.Z);
|
||||
|
||||
if (this->fast_terrain)
|
||||
noise_inter_valley_fill = new Noise(&sp->np_inter_valley_fill, seed, csize.X, csize.Z);
|
||||
|
||||
//// 3D Terrain noise
|
||||
noise_simple_caves_1 = new Noise(&sp->np_simple_caves_1, seed, csize.X, csize.Y + 2, csize.Z);
|
||||
noise_simple_caves_2 = new Noise(&sp->np_simple_caves_2, seed, csize.X, csize.Y + 2, csize.Z);
|
||||
|
||||
if (!this->fast_terrain)
|
||||
noise_cave1 = new Noise(&sp->np_cave1, seed, csize.X, csize.Y + 2, csize.Z);
|
||||
noise_cave2 = new Noise(&sp->np_cave2, seed, csize.X, csize.Y + 2, csize.Z);
|
||||
noise_inter_valley_fill = new Noise(&sp->np_inter_valley_fill, seed, csize.X, csize.Y + 2, csize.Z);
|
||||
noise_massive_caves = new Noise(&sp->np_massive_caves, seed, csize.X, csize.Y + 2, csize.Z);
|
||||
|
||||
//// Biome noise
|
||||
noise_heat_blend = new Noise(¶ms->np_biome_heat_blend, seed, csize.X, csize.Z);
|
||||
@ -161,8 +158,8 @@ MapgenValleys::MapgenValleys(int mapgenid, MapgenParams *params, EmergeManager *
|
||||
|
||||
MapgenValleys::~MapgenValleys()
|
||||
{
|
||||
delete noise_cliffs;
|
||||
delete noise_corr;
|
||||
delete noise_cave1;
|
||||
delete noise_cave2;
|
||||
delete noise_filler_depth;
|
||||
delete noise_heat;
|
||||
delete noise_heat_blend;
|
||||
@ -171,42 +168,36 @@ MapgenValleys::~MapgenValleys()
|
||||
delete noise_inter_valley_fill;
|
||||
delete noise_inter_valley_slope;
|
||||
delete noise_rivers;
|
||||
delete noise_simple_caves_1;
|
||||
delete noise_simple_caves_2;
|
||||
delete noise_massive_caves;
|
||||
delete noise_terrain_height;
|
||||
delete noise_valley_depth;
|
||||
delete noise_valley_profile;
|
||||
|
||||
delete[] heightmap;
|
||||
delete[] biomemap;
|
||||
delete[] heightmap;
|
||||
delete[] tcave_cache;
|
||||
}
|
||||
|
||||
|
||||
MapgenValleysParams::MapgenValleysParams()
|
||||
{
|
||||
spflags = MG_VALLEYS_CLIFFS | MG_VALLEYS_RUGGED
|
||||
| MG_VALLEYS_HUMID_RIVERS | MG_VALLEYS_ALT_CHILL;
|
||||
spflags = MG_VALLEYS_HUMID_RIVERS | MG_VALLEYS_ALT_CHILL;
|
||||
|
||||
altitude_chill = 90; // The altitude at which temperature drops by 20C.
|
||||
// Water in caves will never be higher than this.
|
||||
cave_water_max_height = MAX_MAP_GENERATION_LIMIT;
|
||||
humidity = 50;
|
||||
// the maximum humidity around rivers in otherwise dry areas
|
||||
humidity_break_point = 65;
|
||||
lava_max_height = 0; // Lava will never be higher than this.
|
||||
large_cave_depth = -33;
|
||||
lava_features = 0; // How often water will occur in caves.
|
||||
massive_cave_depth = -256; // highest altitude of massive caves
|
||||
river_depth = 4; // How deep to carve river channels.
|
||||
river_size = 5; // How wide to make rivers.
|
||||
temperature = 50;
|
||||
water_features = 3; // How often water will occur in caves.
|
||||
water_features = 0; // How often water will occur in caves.
|
||||
|
||||
np_cliffs = NoiseParams(0.f, 1.f, v3f(750, 750, 750), 8445, 5, 1.f, 2.f);
|
||||
np_corr = NoiseParams(0.f, 1.f, v3f(40, 40, 40), -3536, 4, 1.f, 2.f);
|
||||
np_cave1 = NoiseParams(0, 12, v3f(96, 96, 96), 52534, 4, 0.5, 2.0);
|
||||
np_cave2 = NoiseParams(0, 12, v3f(96, 96, 96), 10325, 4, 0.5, 2.0);
|
||||
np_filler_depth = NoiseParams(0.f, 1.2f, v3f(256, 256, 256), 1605, 3, 0.5f, 2.f);
|
||||
np_inter_valley_fill = NoiseParams(0.f, 1.f, v3f(256, 512, 256), 1993, 6, 0.8f, 2.f);
|
||||
np_inter_valley_slope = NoiseParams(0.5f, 0.5f, v3f(128, 128, 128), 746, 1, 1.f, 2.f);
|
||||
np_rivers = NoiseParams(0.f, 1.f, v3f(256, 256, 256), -6050, 5, 0.6f, 2.f);
|
||||
np_simple_caves_1 = NoiseParams(0.f, 1.f, v3f(64, 64, 64), -8402, 3, 0.5f, 2.f);
|
||||
np_simple_caves_2 = NoiseParams(0.f, 1.f, v3f(64, 64, 64), 3944, 3, 0.5f, 2.f);
|
||||
np_massive_caves = NoiseParams(0.f, 1.f, v3f(768, 256, 768), 59033, 6, 0.63f, 2.f);
|
||||
np_terrain_height = NoiseParams(-10.f, 50.f, v3f(1024, 1024, 1024), 5202, 6, 0.4f, 2.f);
|
||||
np_valley_depth = NoiseParams(5.f, 4.f, v3f(512, 512, 512), -1914, 1, 1.f, 2.f);
|
||||
np_valley_profile = NoiseParams(0.6f, 0.5f, v3f(512, 512, 512), 777, 1, 1.f, 2.f);
|
||||
@ -218,23 +209,20 @@ void MapgenValleysParams::readParams(const Settings *settings)
|
||||
settings->getFlagStrNoEx("mg_valleys_spflags", spflags, flagdesc_mapgen_valleys);
|
||||
|
||||
settings->getU16NoEx("mg_valleys_altitude_chill", altitude_chill);
|
||||
settings->getS16NoEx("mg_valleys_cave_water_max_height", cave_water_max_height);
|
||||
settings->getS16NoEx("mg_valleys_humidity", humidity);
|
||||
settings->getS16NoEx("mg_valleys_humidity_break_point", humidity_break_point);
|
||||
settings->getS16NoEx("mg_valleys_lava_max_height", lava_max_height);
|
||||
settings->getS16NoEx("mg_valleys_large_cave_depth", large_cave_depth);
|
||||
settings->getU16NoEx("mg_valleys_lava_features", lava_features);
|
||||
settings->getS16NoEx("mg_valleys_massive_cave_depth", massive_cave_depth);
|
||||
settings->getU16NoEx("mg_valleys_river_depth", river_depth);
|
||||
settings->getU16NoEx("mg_valleys_river_size", river_size);
|
||||
settings->getS16NoEx("mg_valleys_temperature", temperature);
|
||||
settings->getU16NoEx("mg_valleys_water_features", water_features);
|
||||
|
||||
settings->getNoiseParams("mg_valleys_np_cliffs", np_cliffs);
|
||||
settings->getNoiseParams("mg_valleys_np_corr", np_corr);
|
||||
settings->getNoiseParams("mg_valleys_np_cave1", np_cave1);
|
||||
settings->getNoiseParams("mg_valleys_np_cave2", np_cave2);
|
||||
settings->getNoiseParams("mg_valleys_np_filler_depth", np_filler_depth);
|
||||
settings->getNoiseParams("mg_valleys_np_inter_valley_fill", np_inter_valley_fill);
|
||||
settings->getNoiseParams("mg_valleys_np_inter_valley_slope", np_inter_valley_slope);
|
||||
settings->getNoiseParams("mg_valleys_np_rivers", np_rivers);
|
||||
settings->getNoiseParams("mg_valleys_np_simple_caves_1", np_simple_caves_1);
|
||||
settings->getNoiseParams("mg_valleys_np_simple_caves_2", np_simple_caves_2);
|
||||
settings->getNoiseParams("mg_valleys_np_massive_caves", np_massive_caves);
|
||||
settings->getNoiseParams("mg_valleys_np_terrain_height", np_terrain_height);
|
||||
settings->getNoiseParams("mg_valleys_np_valley_depth", np_valley_depth);
|
||||
settings->getNoiseParams("mg_valleys_np_valley_profile", np_valley_profile);
|
||||
@ -246,23 +234,20 @@ void MapgenValleysParams::writeParams(Settings *settings) const
|
||||
settings->setFlagStr("mg_valleys_spflags", spflags, flagdesc_mapgen_valleys, U32_MAX);
|
||||
|
||||
settings->setU16("mg_valleys_altitude_chill", altitude_chill);
|
||||
settings->setS16("mg_valleys_cave_water_max_height", cave_water_max_height);
|
||||
settings->setS16("mg_valleys_humidity", humidity);
|
||||
settings->setS16("mg_valleys_humidity_break_point", humidity_break_point);
|
||||
settings->setS16("mg_valleys_lava_max_height", lava_max_height);
|
||||
settings->setS16("mg_valleys_large_cave_depth", large_cave_depth);
|
||||
settings->setU16("mg_valleys_lava_features", lava_features);
|
||||
settings->setS16("mg_valleys_massive_cave_depth", massive_cave_depth);
|
||||
settings->setU16("mg_valleys_river_depth", river_depth);
|
||||
settings->setU16("mg_valleys_river_size", river_size);
|
||||
settings->setS16("mg_valleys_temperature", temperature);
|
||||
settings->setU16("mg_valleys_water_features", water_features);
|
||||
|
||||
settings->setNoiseParams("mg_valleys_np_cliffs", np_cliffs);
|
||||
settings->setNoiseParams("mg_valleys_np_corr", np_corr);
|
||||
settings->setNoiseParams("mg_valleys_np_cave1", np_cave1);
|
||||
settings->setNoiseParams("mg_valleys_np_cave2", np_cave2);
|
||||
settings->setNoiseParams("mg_valleys_np_filler_depth", np_filler_depth);
|
||||
settings->setNoiseParams("mg_valleys_np_inter_valley_fill", np_inter_valley_fill);
|
||||
settings->setNoiseParams("mg_valleys_np_inter_valley_slope", np_inter_valley_slope);
|
||||
settings->setNoiseParams("mg_valleys_np_rivers", np_rivers);
|
||||
settings->setNoiseParams("mg_valleys_np_simple_caves_1", np_simple_caves_1);
|
||||
settings->setNoiseParams("mg_valleys_np_simple_caves_2", np_simple_caves_2);
|
||||
settings->setNoiseParams("mg_valleys_np_massive_caves", np_massive_caves);
|
||||
settings->setNoiseParams("mg_valleys_np_terrain_height", np_terrain_height);
|
||||
settings->setNoiseParams("mg_valleys_np_valley_depth", np_valley_depth);
|
||||
settings->setNoiseParams("mg_valleys_np_valley_profile", np_valley_profile);
|
||||
@ -313,7 +298,7 @@ void MapgenValleys::makeChunk(BlockMakeData *data)
|
||||
|
||||
// Cave creation.
|
||||
if (flags & MG_CAVES)
|
||||
generateSimpleCaves(stone_surface_max_y);
|
||||
generateCaves(stone_surface_max_y);
|
||||
|
||||
// Dungeon creation
|
||||
if ((flags & MG_DUNGEONS) && node_max.Y < 50 && (stone_surface_max_y >= node_min.Y)) {
|
||||
@ -410,28 +395,12 @@ void MapgenValleys::calculateNoise()
|
||||
noise_valley_depth->perlinMap2D(x, z);
|
||||
noise_valley_profile->perlinMap2D(x, z);
|
||||
|
||||
if (fast_terrain) {
|
||||
// Make this 2D for speed, if requested.
|
||||
noise_inter_valley_fill->perlinMap2D(x, z);
|
||||
|
||||
if (cliff_terrain)
|
||||
noise_cliffs->perlinMap2D(x, z);
|
||||
if (rugged_terrain)
|
||||
noise_corr->perlinMap2D(x, z);
|
||||
} else {
|
||||
noise_inter_valley_fill->perlinMap3D(x, y, z);
|
||||
}
|
||||
|
||||
if (flags & MG_CAVES) {
|
||||
noise_simple_caves_1->perlinMap3D(x, y, z);
|
||||
noise_simple_caves_2->perlinMap3D(x, y, z);
|
||||
}
|
||||
|
||||
//mapgen_profiler->avg("noisemaps", tcn.stop() / 1000.f);
|
||||
|
||||
for (s32 index = 0; index < csize.X * csize.Z; index++) {
|
||||
noise_heat->result[index] += noise_heat_blend->result[index];
|
||||
noise_heat->result[index] += temperature_adjust;
|
||||
noise_humidity->result[index] += noise_humidity_blend->result[index];
|
||||
}
|
||||
|
||||
@ -457,27 +426,10 @@ void MapgenValleys::calculateNoise()
|
||||
// method, to create sharper mountains.
|
||||
tn.slope = &noise_inter_valley_slope->result[index];
|
||||
tn.inter_valley_fill = noise_inter_valley_fill->result[index];
|
||||
tn.cliffs = noise_cliffs->result[index];
|
||||
tn.corr = noise_corr->result[index];
|
||||
|
||||
// This is the actual terrain height.
|
||||
float mount = terrainLevelFromNoise(&tn);
|
||||
noise_terrain_height->result[index] = mount;
|
||||
|
||||
if (fast_terrain) {
|
||||
// Assign humidity adjusted by water proximity.
|
||||
// I can't think of a reason why a mod would expect base humidity
|
||||
// from noise or at any altitude other than ground level.
|
||||
noise_humidity->result[index] = humidityByTerrain(
|
||||
noise_humidity->result[index],
|
||||
mount,
|
||||
noise_rivers->result[index],
|
||||
noise_valley_depth->result[index]);
|
||||
|
||||
// Assign heat adjusted by altitude. See humidity, above.
|
||||
if (use_altitude_chill && mount > 0.f)
|
||||
noise_heat->result[index] *= pow(0.5f, (mount - altitude_chill / 3.f) / altitude_chill);
|
||||
}
|
||||
}
|
||||
|
||||
heatmap = noise_heat->result;
|
||||
@ -489,11 +441,9 @@ void MapgenValleys::calculateNoise()
|
||||
// complicated code to determine ground level.
|
||||
float MapgenValleys::terrainLevelFromNoise(TerrainNoise *tn)
|
||||
{
|
||||
float inter_valley_slope = *tn->slope;
|
||||
|
||||
// The square function changes the behaviour of this noise:
|
||||
// very often small, and sometimes very high.
|
||||
float valley_d = pow(*tn->valley, 2);
|
||||
float valley_d = MYSQUARE(*tn->valley);
|
||||
|
||||
// valley_d is here because terrain is generally higher where valleys
|
||||
// are deep (mountains). base represents the height of the
|
||||
@ -501,14 +451,17 @@ float MapgenValleys::terrainLevelFromNoise(TerrainNoise *tn)
|
||||
float base = tn->terrain_height + valley_d;
|
||||
|
||||
// "river" represents the distance from the river, in arbitrary units.
|
||||
float river = fabs(*tn->rivers) - river_size;
|
||||
float river = fabs(*tn->rivers) - river_size_factor;
|
||||
|
||||
// Use the curve of the function 1−exp(−(x/a)²) to model valleys.
|
||||
// Making "a" vary (0 < a ≤ 1) changes the shape of the valleys.
|
||||
// Use the curve of the function 1-exp(-(x/a)^2) to model valleys.
|
||||
// Making "a" vary (0 < a <= 1) changes the shape of the valleys.
|
||||
// Try it with a geometry software !
|
||||
// (here x = "river" and a = valley_profile).
|
||||
// "valley" represents the height of the terrain, from the rivers.
|
||||
*tn->valley = valley_d * (1.f - exp(- pow(river / tn->valley_profile, 2)));
|
||||
{
|
||||
float t = river / tn->valley_profile;
|
||||
*tn->valley = valley_d * (1.f - exp(- MYSQUARE(t)));
|
||||
}
|
||||
|
||||
// approximate height of the terrain at this point
|
||||
float mount = base + *tn->valley;
|
||||
@ -520,36 +473,21 @@ float MapgenValleys::terrainLevelFromNoise(TerrainNoise *tn)
|
||||
// Base ground is returned as rivers since it's basically the water table.
|
||||
*tn->rivers = base;
|
||||
if (river < 0.f) {
|
||||
// Use the the function −sqrt(1−x²) which models a circle.
|
||||
float depth = (river_depth * sqrt(1.f - pow((river / river_size + 1), 2)));
|
||||
// Use the the function -sqrt(1-x^2) which models a circle.
|
||||
float depth;
|
||||
{
|
||||
float t = river / river_size_factor + 1;
|
||||
depth = (river_depth_bed * sqrt(MYMAX(0, 1.f - MYSQUARE(t))));
|
||||
}
|
||||
|
||||
// base - depth : height of the bottom of the river
|
||||
// water_level - 2 : don't make rivers below 2 nodes under the surface
|
||||
u16 min_bottom = 2;
|
||||
if (!fast_terrain)
|
||||
min_bottom = 6;
|
||||
mount = fmin(fmax(base - depth, (float) (water_level - min_bottom)), mount);
|
||||
// water_level - 6 : don't make rivers below 6 nodes under the surface
|
||||
mount = rangelim(base - depth, (float) (water_level - 6), mount);
|
||||
|
||||
// Slope has no influence on rivers.
|
||||
*tn->slope = 0.f;
|
||||
}
|
||||
|
||||
if (fast_terrain) {
|
||||
// The penultimate step builds up the heights, but we reduce it
|
||||
// occasionally to create cliffs.
|
||||
float delta = sin(tn->inter_valley_fill) * *tn->slope;
|
||||
if (cliff_terrain && tn->cliffs >= 0.2f)
|
||||
mount += delta * 0.66f;
|
||||
else
|
||||
mount += delta;
|
||||
|
||||
// Use yet another noise to make the heights look more rugged.
|
||||
if (rugged_terrain
|
||||
&& mount > water_level
|
||||
&& fabs(inter_valley_slope * tn->inter_valley_fill) < 0.3f)
|
||||
mount += ((delta < 0.f) ? -1.f : 1.f) * pow(fabs(delta), 0.5f) * fabs(sin(tn->corr));
|
||||
}
|
||||
|
||||
return mount;
|
||||
}
|
||||
|
||||
@ -559,56 +497,27 @@ float MapgenValleys::terrainLevelFromNoise(TerrainNoise *tn)
|
||||
float MapgenValleys::adjustedTerrainLevelFromNoise(TerrainNoise *tn)
|
||||
{
|
||||
float mount = terrainLevelFromNoise(tn);
|
||||
s16 y_start = myround(mount);
|
||||
|
||||
if (!fast_terrain) {
|
||||
for (s16 y = round(mount); y <= round(mount) + 1000; y++) {
|
||||
for (s16 y = y_start; y <= y_start + 1000; y++) {
|
||||
float fill = NoisePerlin3D(&noise_inter_valley_fill->np, tn->x, y, tn->z, seed);
|
||||
|
||||
if (fill * *tn->slope <= y - mount) {
|
||||
mount = fmax(y - 1, mount);
|
||||
mount = MYMAX(y - 1, mount);
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
return mount;
|
||||
}
|
||||
|
||||
|
||||
float MapgenValleys::humidityByTerrain(
|
||||
float humidity_base,
|
||||
float mount,
|
||||
float rivers,
|
||||
float valley)
|
||||
{
|
||||
// Although the original valleys adjusts humidity by distance
|
||||
// from seawater, this causes problems with the default biomes.
|
||||
// Adjust only by freshwater proximity.
|
||||
float humidity = humidity_base + humidity_adjust;
|
||||
|
||||
if (humid_rivers && mount > water_level) {
|
||||
// Offset to make everything average the same.
|
||||
humidity -= (humidity_break_point - humidity_adjust) / 3.f;
|
||||
|
||||
// This method is from the original lua.
|
||||
float water_table = pow(0.5f, fmax(rivers / 3.f, 0.f));
|
||||
// This adds humidity next to rivers and lakes.
|
||||
float river_water = pow(0.5f, fmax(valley / 12.f, 0.f));
|
||||
// Combine the two.
|
||||
float water = water_table + (1.f - water_table) * river_water;
|
||||
humidity = fmax(humidity, (humidity_break_point * water));
|
||||
}
|
||||
|
||||
return humidity;
|
||||
}
|
||||
|
||||
|
||||
int MapgenValleys::getGroundLevelAtPoint(v2s16 p)
|
||||
{
|
||||
// ***********************************************
|
||||
// This method (deliberately) does not return correct
|
||||
// terrain values. This may be a problem in the future.
|
||||
// ***********************************************
|
||||
// ***********************************
|
||||
// This method (deliberately) does not
|
||||
// return correct terrain values.
|
||||
// ***********************************
|
||||
|
||||
// Since MT doesn't normally deal with rivers, check
|
||||
// to make sure this isn't a request for a location
|
||||
@ -616,7 +525,7 @@ int MapgenValleys::getGroundLevelAtPoint(v2s16 p)
|
||||
float rivers = NoisePerlin2D(&noise_rivers->np, p.X, p.Y, seed);
|
||||
|
||||
// If it's wet, return an unusable number.
|
||||
if (fabs(rivers) < river_size)
|
||||
if (fabs(rivers) < river_size_factor)
|
||||
return MAX_MAP_GENERATION_LIMIT;
|
||||
|
||||
// Otherwise, return the real result.
|
||||
@ -640,17 +549,6 @@ float MapgenValleys::terrainLevelAtPoint(s16 x, s16 z)
|
||||
tn.valley_profile = NoisePerlin2D(&noise_valley_profile->np, x, z, seed);
|
||||
tn.slope = &inter_valley_slope;
|
||||
tn.inter_valley_fill = 0.f;
|
||||
tn.cliffs = 0.f;
|
||||
tn.corr = 0.f;
|
||||
|
||||
if (fast_terrain) {
|
||||
tn.inter_valley_fill = NoisePerlin2D(&noise_inter_valley_fill->np, x, z, seed);
|
||||
|
||||
if (cliff_terrain)
|
||||
tn.cliffs = NoisePerlin2D(&noise_cliffs->np, x, z, seed);
|
||||
if (rugged_terrain)
|
||||
tn.corr = NoisePerlin2D(&noise_corr->np, x, z, seed);
|
||||
}
|
||||
|
||||
return adjustedTerrainLevelFromNoise(&tn);
|
||||
}
|
||||
@ -679,16 +577,12 @@ int MapgenValleys::generateTerrain()
|
||||
if (surface_y > surface_max_y)
|
||||
surface_max_y = surface_y;
|
||||
|
||||
u32 index_3d = 0;
|
||||
if (!fast_terrain)
|
||||
index_3d = (z - node_min.Z) * zstride + (x - node_min.X);
|
||||
|
||||
u32 index_3d = (z - node_min.Z) * zstride + (x - node_min.X);
|
||||
u32 index_data = vm->m_area.index(x, node_min.Y - 1, z);
|
||||
|
||||
// Mapgens concern themselves with stone and water.
|
||||
for (s16 y = node_min.Y - 1; y <= node_max.Y + 1; y++) {
|
||||
float fill = 0.f;
|
||||
if (!fast_terrain)
|
||||
fill = noise_inter_valley_fill->result[index_3d];
|
||||
|
||||
if (vm->m_data[index_data].getContent() == CONTENT_IGNORE) {
|
||||
@ -697,14 +591,14 @@ int MapgenValleys::generateTerrain()
|
||||
if (river && y == surface_y) {
|
||||
// river bottom
|
||||
vm->m_data[index_data] = n_sand;
|
||||
} else if ((fast_terrain || river) && y <= surface_y) {
|
||||
} else if (river && y <= surface_y) {
|
||||
// ground
|
||||
vm->m_data[index_data] = n_stone;
|
||||
} else if (river && y < river_y) {
|
||||
// river
|
||||
vm->m_data[index_data] = n_river_water;
|
||||
} else if ((!fast_terrain) && (!river) && round(fill * slope) >= y - surface_y) {
|
||||
// ground (slow method)
|
||||
} else if ((!river) && myround(fill * slope) >= y - surface_y) {
|
||||
// ground
|
||||
vm->m_data[index_data] = n_stone;
|
||||
heightmap[index_2d] = surface_max_y = y;
|
||||
} else if (y <= water_level) {
|
||||
@ -716,23 +610,21 @@ int MapgenValleys::generateTerrain()
|
||||
}
|
||||
|
||||
vm->m_area.add_y(em, index_data, 1);
|
||||
if (!fast_terrain)
|
||||
index_3d += ystride;
|
||||
}
|
||||
|
||||
if (!fast_terrain) {
|
||||
// Assign the humidity adjusted by water proximity.
|
||||
noise_humidity->result[index_2d] = humidityByTerrain(
|
||||
noise_humidity->result[index_2d],
|
||||
surface_max_y,
|
||||
noise_rivers->result[index_2d],
|
||||
noise_valley_depth->result[index_2d]);
|
||||
// Although the original valleys adjusts humidity by distance
|
||||
// from seawater, this causes problems with the default biomes.
|
||||
// Adjust only by freshwater proximity.
|
||||
const float humidity_offset = 0.8f; // derived by testing
|
||||
if (humid_rivers)
|
||||
noise_humidity->result[index_2d] *= (1 + pow(0.5f, MYMAX((surface_max_y
|
||||
- noise_rivers->result[index_2d]) / 3.f, 0.f))) * humidity_offset;
|
||||
|
||||
// Assign the heat adjusted by altitude. See humidity, above.
|
||||
// Assign the heat adjusted by altitude.
|
||||
if (use_altitude_chill && surface_max_y > 0)
|
||||
noise_heat->result[index_2d]
|
||||
*= pow(0.5f, (surface_max_y - altitude_chill / 3.f) / altitude_chill);
|
||||
}
|
||||
noise_heat->result[index_2d] *=
|
||||
pow(0.5f, (surface_max_y - altitude_chill / 3.f) / altitude_chill);
|
||||
}
|
||||
|
||||
return surface_max_y;
|
||||
@ -897,28 +789,74 @@ void MapgenValleys::dustTopNodes()
|
||||
}
|
||||
|
||||
|
||||
void MapgenValleys::generateSimpleCaves(s16 max_stone_y)
|
||||
void MapgenValleys::generateCaves(s16 max_stone_y)
|
||||
{
|
||||
if (max_stone_y < node_min.Y)
|
||||
return;
|
||||
|
||||
noise_cave1->perlinMap3D(node_min.X, node_min.Y - 1, node_min.Z);
|
||||
noise_cave2->perlinMap3D(node_min.X, node_min.Y - 1, node_min.Z);
|
||||
|
||||
PseudoRandom ps(blockseed + 72202);
|
||||
|
||||
MapNode n_air(CONTENT_AIR);
|
||||
MapNode n_dirt(c_dirt);
|
||||
MapNode n_lava(c_lava_source);
|
||||
MapNode n_water(c_river_water_source);
|
||||
|
||||
v3s16 em = vm->m_area.getExtent();
|
||||
|
||||
s16 base_water_chance = 0;
|
||||
if (water_features < 11)
|
||||
base_water_chance = ceil(MAX_MAP_GENERATION_LIMIT / (water_features * 1000));
|
||||
// Cave blend distance near YMIN, YMAX
|
||||
const float massive_cave_blend = 128.f;
|
||||
// noise threshold for massive caves
|
||||
const float massive_cave_threshold = 0.6f;
|
||||
// mct: 1 = small rare caves, 0.5 1/3rd ground volume, 0 = 1/2 ground volume.
|
||||
|
||||
float yblmin = -map_gen_limit + massive_cave_blend * 1.5f;
|
||||
float yblmax = massive_cave_depth - massive_cave_blend * 1.5f;
|
||||
bool made_a_big_one = false;
|
||||
|
||||
// Cache the tcave values as they only vary by altitude.
|
||||
if (node_max.Y <= massive_cave_depth) {
|
||||
noise_massive_caves->perlinMap3D(node_min.X, node_min.Y - 1, node_min.Z);
|
||||
|
||||
for (s16 y = node_min.Y - 1; y <= node_max.Y + 1; y++) {
|
||||
float tcave = massive_cave_threshold;
|
||||
|
||||
if (y < yblmin) {
|
||||
float t = (yblmin - y) / massive_cave_blend;
|
||||
tcave += MYSQUARE(t);
|
||||
} else if (y > yblmax) {
|
||||
float t = (y - yblmax) / massive_cave_blend;
|
||||
tcave += MYSQUARE(t);
|
||||
}
|
||||
|
||||
tcave_cache[y - node_min.Y + 1] = tcave;
|
||||
}
|
||||
}
|
||||
|
||||
// lava_depth varies between one and ten as you approach
|
||||
// the bottom of the world.
|
||||
s16 lava_depth = ceil((lava_max_height - node_min.Y + 1) * 10.f / map_gen_limit);
|
||||
// This allows random lava spawns to be less common at the surface.
|
||||
s16 lava_chance = MYCUBE(lava_features_lim) * lava_depth;
|
||||
// water_depth varies between ten and one on the way down.
|
||||
s16 water_depth = ceil((map_gen_limit - abs(node_min.Y) + 1) * 10.f / map_gen_limit);
|
||||
// This allows random water spawns to be more common at the surface.
|
||||
s16 water_chance = MYCUBE(water_features_lim) * water_depth;
|
||||
|
||||
// Reduce the odds of overflows even further.
|
||||
if (node_max.Y > water_level) {
|
||||
lava_chance /= 5;
|
||||
water_chance /= 5;
|
||||
}
|
||||
|
||||
if (max_stone_y >= node_min.Y) {
|
||||
u32 index_2d = 0;
|
||||
u32 index_3d = 0;
|
||||
for (s16 z = node_min.Z; z <= node_max.Z; z++)
|
||||
for (s16 x = node_min.X; x <= node_max.X; x++, index_2d++) {
|
||||
Biome *biome = (Biome *)bmgr->getRaw(biomemap[index_2d]);
|
||||
bool air_above = false;
|
||||
//bool underground = false;
|
||||
bool underground = false;
|
||||
u32 index_data = vm->m_area.index(x, node_max.Y + 1, z);
|
||||
|
||||
index_3d = (z - node_min.Z) * zstride + (csize.Y + 1) * ystride + (x - node_min.X);
|
||||
@ -929,69 +867,80 @@ void MapgenValleys::generateSimpleCaves(s16 max_stone_y)
|
||||
y--, index_3d -= ystride, vm->m_area.add_y(em, index_data, -1)) {
|
||||
float terrain = noise_terrain_height->result[index_2d];
|
||||
|
||||
// Saves some time and prevents removing above ground nodes.
|
||||
if (y > terrain + 1) {
|
||||
// Saves some time.
|
||||
if (y > terrain + 10) {
|
||||
air_above = true;
|
||||
continue;
|
||||
} else if (y < terrain - 40) {
|
||||
underground = true;
|
||||
}
|
||||
|
||||
// Dig massive caves.
|
||||
if (node_max.Y <= massive_cave_depth
|
||||
&& noise_massive_caves->result[index_3d]
|
||||
> tcave_cache[y - node_min.Y + 1]) {
|
||||
vm->m_data[index_data] = n_air;
|
||||
made_a_big_one = true;
|
||||
}
|
||||
|
||||
content_t c = vm->m_data[index_data].getContent();
|
||||
bool n1 = (fabs(noise_simple_caves_1->result[index_3d]) < 0.07f);
|
||||
bool n2 = (fabs(noise_simple_caves_2->result[index_3d]) < 0.07f);
|
||||
float d1 = contour(noise_cave1->result[index_3d]);
|
||||
float d2 = contour(noise_cave2->result[index_3d]);
|
||||
|
||||
// River water is (foolishly) not set as ground content
|
||||
// River water is not set as ground content
|
||||
// in the default game. This can produce strange results
|
||||
// when a cave undercuts a river. However, that's not for
|
||||
// the mapgen to correct. Fix it in lua.
|
||||
|
||||
if (c == CONTENT_AIR) {
|
||||
air_above = true;
|
||||
} else if (n1 && n2 && ndef->get(c).is_ground_content) {
|
||||
// When both n's are true, we're in a cave.
|
||||
} else if (d1 * d2 > 0.3f && ndef->get(c).is_ground_content) {
|
||||
// in a cave
|
||||
vm->m_data[index_data] = n_air;
|
||||
air_above = true;
|
||||
} else if (air_above
|
||||
&& (c == c_stone || c == c_sandstone || c == c_desert_stone)) {
|
||||
// At the cave floor
|
||||
s16 sr = ps.next() & 1023;
|
||||
} else if (air_above && (c == biome->c_filler || c == biome->c_stone)) {
|
||||
// at the cave floor
|
||||
s16 sr = ps.range(0,39);
|
||||
u32 j = index_data;
|
||||
vm->m_area.add_y(em, j, 1);
|
||||
|
||||
if (sr > (terrain - y) * 25) {
|
||||
if (sr > terrain - y) {
|
||||
// Put dirt in caves near the surface.
|
||||
Biome *biome = (Biome *)bmgr->getRaw(biomemap[index_2d]);
|
||||
if (underground)
|
||||
vm->m_data[index_data] = MapNode(biome->c_filler);
|
||||
} else {
|
||||
s16 lava_chance = 0;
|
||||
|
||||
if (y <= lava_max_height && c == c_stone) {
|
||||
// Lava spawns increase with depth.
|
||||
lava_chance = ceil((lava_max_height - y + 1) / 10000);
|
||||
|
||||
if (sr < lava_chance)
|
||||
else
|
||||
vm->m_data[index_data] = MapNode(biome->c_top);
|
||||
} else if (sr < 3 && underground) {
|
||||
sr = abs(ps.next());
|
||||
if (lava_features_lim > 0 && y <= lava_max_height
|
||||
&& c == biome->c_stone && sr < lava_chance)
|
||||
vm->m_data[j] = n_lava;
|
||||
}
|
||||
|
||||
if (base_water_chance > 0 && y <= cave_water_max_height) {
|
||||
s16 water_chance = base_water_chance
|
||||
- (abs(y - water_level) / (water_features * 1000));
|
||||
|
||||
// Waterfalls may get out of control above ground.
|
||||
sr -= lava_chance;
|
||||
|
||||
// If sr < 0 then we should have already placed lava --
|
||||
// don't immediately dump water on it.
|
||||
if (sr >= 0 && sr < water_chance)
|
||||
if (water_features_lim > 0 && y <= cave_water_max_height
|
||||
&& sr >= 0 && sr < water_chance)
|
||||
vm->m_data[j] = n_water;
|
||||
}
|
||||
}
|
||||
|
||||
air_above = false;
|
||||
}
|
||||
|
||||
// If we're not in a cave, there's no open space.
|
||||
if (!(n1 && n2))
|
||||
underground = true;
|
||||
} else if (c == biome->c_filler || c == biome->c_stone) {
|
||||
air_above = false;
|
||||
underground = true;
|
||||
} else {
|
||||
air_above = false;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
if (node_max.Y <= large_cave_depth && (!made_a_big_one)) {
|
||||
u32 bruises_count = ps.range(0, 2);
|
||||
for (u32 i = 0; i < bruises_count; i++) {
|
||||
CaveV5 cave(this, &ps);
|
||||
cave.makeCave(node_min, node_max, max_stone_y);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
@ -32,10 +32,11 @@ with this program; if not, write to the Free Software Foundation, Inc.,
|
||||
|
||||
/////////////////// Mapgen Valleys flags
|
||||
#define MG_VALLEYS_ALT_CHILL 0x01
|
||||
#define MG_VALLEYS_CLIFFS 0x02
|
||||
#define MG_VALLEYS_FAST 0x04
|
||||
#define MG_VALLEYS_HUMID_RIVERS 0x08
|
||||
#define MG_VALLEYS_RUGGED 0x10
|
||||
#define MG_VALLEYS_HUMID_RIVERS 0x02
|
||||
|
||||
// Feed only one variable into these.
|
||||
#define MYSQUARE(x) (x) * (x)
|
||||
#define MYCUBE(x) (x) * (x) * (x)
|
||||
|
||||
class BiomeManager;
|
||||
|
||||
@ -47,28 +48,25 @@ class BiomeManager;
|
||||
struct MapgenValleysParams : public MapgenSpecificParams {
|
||||
u32 spflags;
|
||||
|
||||
s16 large_cave_depth;
|
||||
s16 massive_cave_depth;
|
||||
u16 altitude_chill;
|
||||
s16 cave_water_max_height;
|
||||
s16 humidity;
|
||||
s16 humidity_break_point;
|
||||
s16 lava_max_height;
|
||||
u16 lava_features;
|
||||
u16 river_depth;
|
||||
u16 river_size;
|
||||
s16 temperature;
|
||||
u16 water_features;
|
||||
|
||||
NoiseParams np_biome_heat;
|
||||
NoiseParams np_biome_heat_blend;
|
||||
NoiseParams np_biome_humidity;
|
||||
NoiseParams np_biome_humidity_blend;
|
||||
NoiseParams np_cliffs;
|
||||
NoiseParams np_corr;
|
||||
NoiseParams np_cave1;
|
||||
NoiseParams np_cave2;
|
||||
NoiseParams np_filler_depth;
|
||||
NoiseParams np_inter_valley_fill;
|
||||
NoiseParams np_inter_valley_slope;
|
||||
NoiseParams np_rivers;
|
||||
NoiseParams np_simple_caves_1;
|
||||
NoiseParams np_simple_caves_2;
|
||||
NoiseParams np_massive_caves;
|
||||
NoiseParams np_terrain_height;
|
||||
NoiseParams np_valley_depth;
|
||||
NoiseParams np_valley_profile;
|
||||
@ -89,8 +87,6 @@ struct TerrainNoise {
|
||||
float valley_profile;
|
||||
float *slope;
|
||||
float inter_valley_fill;
|
||||
float cliffs;
|
||||
float corr;
|
||||
};
|
||||
|
||||
class MapgenValleys : public Mapgen {
|
||||
@ -102,6 +98,8 @@ public:
|
||||
virtual void makeChunk(BlockMakeData *data);
|
||||
int getGroundLevelAtPoint(v2s16 p);
|
||||
|
||||
s16 large_cave_depth;
|
||||
|
||||
private:
|
||||
EmergeManager *m_emerge;
|
||||
BiomeManager *bmgr;
|
||||
@ -109,10 +107,9 @@ private:
|
||||
int ystride;
|
||||
int zstride;
|
||||
|
||||
float map_gen_limit;
|
||||
|
||||
u32 spflags;
|
||||
bool cliff_terrain;
|
||||
bool fast_terrain;
|
||||
bool rugged_terrain;
|
||||
bool humid_rivers;
|
||||
bool use_altitude_chill;
|
||||
|
||||
@ -123,8 +120,8 @@ private:
|
||||
|
||||
Noise *noise_filler_depth;
|
||||
|
||||
Noise *noise_cliffs;
|
||||
Noise *noise_corr;
|
||||
Noise *noise_cave1;
|
||||
Noise *noise_cave2;
|
||||
Noise *noise_heat;
|
||||
Noise *noise_heat_blend;
|
||||
Noise *noise_humidity;
|
||||
@ -132,21 +129,21 @@ private:
|
||||
Noise *noise_inter_valley_fill;
|
||||
Noise *noise_inter_valley_slope;
|
||||
Noise *noise_rivers;
|
||||
Noise *noise_simple_caves_1;
|
||||
Noise *noise_simple_caves_2;
|
||||
Noise *noise_massive_caves;
|
||||
Noise *noise_terrain_height;
|
||||
Noise *noise_valley_depth;
|
||||
Noise *noise_valley_profile;
|
||||
|
||||
float altitude_chill;
|
||||
float cave_water_max_height;
|
||||
s16 cave_water_max_height;
|
||||
float humidity_adjust;
|
||||
float humidity_break_point;
|
||||
float lava_max_height;
|
||||
float river_depth;
|
||||
float river_size;
|
||||
float temperature_adjust;
|
||||
s16 water_features;
|
||||
s16 lava_features_lim;
|
||||
s16 lava_max_height;
|
||||
s16 massive_cave_depth;
|
||||
float river_depth_bed;
|
||||
float river_size_factor;
|
||||
float *tcave_cache;
|
||||
s16 water_features_lim;
|
||||
|
||||
content_t c_cobble;
|
||||
content_t c_desert_stone;
|
||||
@ -176,7 +173,7 @@ private:
|
||||
MgStoneType generateBiomes(float *heat_map, float *humidity_map);
|
||||
void dustTopNodes();
|
||||
|
||||
void generateSimpleCaves(s16 max_stone_y);
|
||||
void generateCaves(s16 max_stone_y);
|
||||
};
|
||||
|
||||
struct MapgenFactoryValleys : public MapgenFactory {
|
||||
|
||||
Loading…
Reference in New Issue
Block a user