Allow NodeTimer, ABM and block mgmt interval changes.

ABM's are hardcoded to run every 1.0s, NodeTimers are hard coded to
run at every 1.0s. Block mgmt is running every 2.0sec.

However, these timers can be better tuned for both higher and lower
values by server owners. Some server owners want to, and have the
resources to send more packets per second to clients, and so they
may wish to send smaller updates sooner. Right now all ABM's are
coalesced into 1.0 second intervals, resulting in large send queues
to all clients. By reducing the amount of possible timers, one can
get a far better response rate and lower the perception of lag.

On the other side of the camp, some servers may want to increase
these values, which again isn't easily doable.

The global settings abm_interval and nodetimer_interval are set to
current values by default. I've tested with 0.2/0.5 type values
and noticed a greatly improved response and better scattering of
nodetimers, as well as enjoying not faceplanting into doors with
pressure plates anymore.
This commit is contained in:
Auke Kok 2016-03-01 23:14:26 -08:00 committed by paramat
parent d915ca1124
commit c5c727d627
6 changed files with 45 additions and 12 deletions

@ -795,6 +795,15 @@ sqlite_synchronous (Synchronous SQLite) enum 2 0,1,2
# Length of a server tick and the interval at which objects are generally updated over network.
dedicated_server_step (Dedicated server step) float 0.1
# Time in between active block management cycles
active_block_mgmt_interval (Active Block Management interval) float 2.0
# Length of time between ABM execution cycles
abm_interval (Active Block Modifier interval) float 1.0
# Length of time between NodeTimer execution cycles
nodetimer_interval (NodeTimer interval) float 1.0
# If enabled, invalid world data won't cause the server to shut down.
# Only enable this if you know what you are doing.
ignore_world_load_errors (Ignore world errors) bool false

@ -980,6 +980,18 @@
# type: float
# dedicated_server_step = 0.1
# Length of time between Active Block Management execution cycles
# type: float
# active_block_mgmt_interval = 2.0
# Length of time between ABM execution cycles
# type: float
# abm_interval = 1.0
# Length of time between NodeTimer execution cycles
# type: float
# nodetimer_interval = 1.0
# If enabled, invalid world data won't cause the server to shut down.
# Only enable this if you know what you are doing.
# type: bool

@ -280,6 +280,9 @@ void set_default_settings(Settings *settings)
settings->setDefault("sqlite_synchronous", "2");
settings->setDefault("full_block_send_enable_min_time_from_building", "2.0");
settings->setDefault("dedicated_server_step", "0.1");
settings->setDefault("active_block_mgmt_interval", "2.0");
settings->setDefault("abm_interval", "1.0");
settings->setDefault("nodetimer_interval", "1.0");
settings->setDefault("ignore_world_load_errors", "false");
settings->setDefault("remote_media", "");
settings->setDefault("debug_log_level", "action");

@ -59,6 +59,9 @@ Environment::Environment():
m_day_night_ratio_override(0.0f)
{
m_cache_enable_shaders = g_settings->getBool("enable_shaders");
m_cache_active_block_mgmt_interval = g_settings->getFloat("active_block_mgmt_interval");
m_cache_abm_interval = g_settings->getFloat("abm_interval");
m_cache_nodetimer_interval = g_settings->getFloat("nodetimer_interval");
}
Environment::~Environment()
@ -1322,9 +1325,8 @@ void ServerEnvironment::step(float dtime)
/*
Manage active block list
*/
if(m_active_blocks_management_interval.step(dtime, 2.0))
{
ScopeProfiler sp(g_profiler, "SEnv: manage act. block list avg /2s", SPT_AVG);
if (m_active_blocks_management_interval.step(dtime, m_cache_active_block_mgmt_interval)) {
ScopeProfiler sp(g_profiler, "SEnv: manage act. block list avg per interval", SPT_AVG);
/*
Get player block positions
*/
@ -1399,11 +1401,10 @@ void ServerEnvironment::step(float dtime)
/*
Mess around in active blocks
*/
if(m_active_blocks_nodemetadata_interval.step(dtime, 1.0))
{
ScopeProfiler sp(g_profiler, "SEnv: mess in act. blocks avg /1s", SPT_AVG);
if (m_active_blocks_nodemetadata_interval.step(dtime, m_cache_nodetimer_interval)) {
ScopeProfiler sp(g_profiler, "SEnv: mess in act. blocks avg per interval", SPT_AVG);
float dtime = 1.0;
float dtime = m_cache_nodetimer_interval;
for(std::set<v3s16>::iterator
i = m_active_blocks.m_list.begin();
@ -1446,19 +1447,18 @@ void ServerEnvironment::step(float dtime)
}
}
const float abm_interval = 1.0;
if(m_active_block_modifier_interval.step(dtime, abm_interval))
if (m_active_block_modifier_interval.step(dtime, m_cache_abm_interval))
do{ // breakable
if(m_active_block_interval_overload_skip > 0){
ScopeProfiler sp(g_profiler, "SEnv: ABM overload skips");
m_active_block_interval_overload_skip--;
break;
}
ScopeProfiler sp(g_profiler, "SEnv: modify in blocks avg /1s", SPT_AVG);
TimeTaker timer("modify in active blocks");
ScopeProfiler sp(g_profiler, "SEnv: modify in blocks avg per interval", SPT_AVG);
TimeTaker timer("modify in active blocks per interval");
// Initialize handling of ActiveBlockModifiers
ABMHandler abmhandler(m_abms, abm_interval, this, true);
ABMHandler abmhandler(m_abms, m_cache_abm_interval, this, true);
for(std::set<v3s16>::iterator
i = m_active_blocks.m_list.begin();

@ -136,6 +136,9 @@ protected:
* a later release.
*/
bool m_cache_enable_shaders;
float m_cache_active_block_mgmt_interval;
float m_cache_abm_interval;
float m_cache_nodetimer_interval;
private:
Mutex m_time_lock;

@ -409,6 +409,12 @@ fake_function() {
gettext("See http://www.sqlite.org/pragma.html#pragma_synchronous");
gettext("Dedicated server step");
gettext("Length of a server tick and the interval at which objects are generally updated over network.");
gettext("Active Block Management interval");
gettext("Time in between active block management cycles");
gettext("ABM modifier interval");
gettext("Length of time between ABM execution cycles");
gettext("NodeTimer interval");
gettext("Length of time between NodeTimer execution cycles");
gettext("Ignore world errors");
gettext("If enabled, invalid world data won't cause the server to shut down.\nOnly enable this if you know what you are doing.");
gettext("Liquid loop max");