New pistons activation mechanism, fixes many of the issues reported when pushing mesecons around. Side effect is that it might be somewhat slower, and it waits a tiny delay before extending or retracting. This should be unnoticable in normal use.

This commit is contained in:
Anthony Zhang 2012-10-02 17:09:39 -04:00
parent cd8fd55fe3
commit dcd2f94ba9

@ -5,7 +5,7 @@ minetest.register_node("mesecons_pistons:piston_normal", {
tiles = {"jeija_piston_tb.png", "jeija_piston_tb.png", "jeija_piston_tb.png", "jeija_piston_tb.png", "jeija_piston_tb.png", "jeija_piston_side.png"},
groups = {cracky=3, mesecon = 2},
paramtype2 = "facedir",
after_dig_node = function(pos, oldnode)
after_destruct = function(pos, oldnode)
local dir = mesecon:piston_get_direction(oldnode)
pos.x, pos.y, pos.z = pos.x + dir.x, pos.y + dir.y, pos.z + dir.z --move to first node to check
@ -17,6 +17,10 @@ minetest.register_node("mesecons_pistons:piston_normal", {
end
end
end,
on_timer = function(pos, elapsed)
mesecon:piston_push(pos, minetest.env:get_node(pos))
return false
end,
})
mesecon:register_effector("mesecons_pistons:piston_normal", "mesecons_pistons:piston_normal")
@ -26,7 +30,7 @@ minetest.register_node("mesecons_pistons:piston_sticky", {
tiles = {"jeija_piston_tb.png", "jeija_piston_tb.png", "jeija_piston_tb.png", "jeija_piston_tb.png", "jeija_piston_tb.png", "jeija_piston_sticky_side.png"},
groups = {cracky=3, mesecon = 2},
paramtype2 = "facedir",
after_dig_node = function(pos, oldnode)
after_destruct = function(pos, oldnode)
local dir = mesecon:piston_get_direction(oldnode)
pos.x, pos.y, pos.z = pos.x + dir.x, pos.y + dir.y, pos.z + dir.z --move to first node to check
@ -38,6 +42,10 @@ minetest.register_node("mesecons_pistons:piston_sticky", {
end
end
end,
on_timer = function(pos, elapsed)
mesecon:piston_push(pos, minetest.env:get_node(pos))
return false
end,
})
mesecon:register_effector("mesecons_pistons:piston_sticky", "mesecons_pistons:piston_sticky")
@ -80,9 +88,6 @@ minetest.register_node("mesecons_pistons:piston_pusher_normal", {
},
})
mesecon:register_mvps_stopper("mesecons_pistons:piston_pusher_normal")
mesecon:register_mvps_stopper("mesecons_pistons:piston_pusher_sticky")
minetest.register_node("mesecons_pistons:piston_pusher_sticky", {
drawtype = "nodebox",
tiles = {
@ -112,12 +117,55 @@ minetest.register_node("mesecons_pistons:piston_pusher_sticky", {
},
})
mesecon:register_mvps_stopper("mesecons_pistons:piston_pusher_normal")
mesecon:register_mvps_stopper("mesecons_pistons:piston_pusher_sticky")
-- Push action
mesecon:register_on_signal_on(function(pos, node)
if node.name ~= "mesecons_pistons:piston_normal" and node.name ~= "mesecons_pistons:piston_sticky" then
return
end
local timer = minetest.env:get_node_timer(pos)
timer:set(1.0, 0)
end)
--Pull action
mesecon:register_on_signal_off(function(pos, node)
if node.name ~= "mesecons_pistons:piston_normal" and node.name ~= "mesecons_pistons:piston_sticky" then
return
end
local dir = mesecon:piston_get_direction(node)
pos.x, pos.y, pos.z = pos.x + dir.x, pos.y + dir.y, pos.z + dir.z --move to the node to be replaced
--ensure piston is extended
local checknode = minetest.env:get_node(pos)
if checknode.name ~= "mesecons_pistons:piston_pusher_normal" and checknode.name ~= "mesecons_pistons:piston_pusher_sticky" then
return
end
if checknode.param2 ~= node.param2 then --pusher is not facing the same direction as the piston
return --piston is not extended
end
--retract piston
minetest.env:remove_node(pos) --remove pusher
if node.name == "mesecons_pistons:piston_sticky" then --retract block
local checkpos = {x=pos.x + dir.x, y=pos.y + dir.y, z=pos.z + dir.z} --move to the node to be retracted
checknode = minetest.env:get_node(checkpos)
if checknode.name ~= "air"
and checknode.name ~= "ignore"
and minetest.registered_nodes[checknode.name].liquidtype == "none"
and not mesecon:is_mvps_stopper(checknode.name) then
minetest.env:set_node(pos, checknode)
minetest.env:remove_node(checkpos)
mesecon:updatenode(checkpos)
end
end
nodeupdate(pos)
end)
function mesecon:piston_push(pos, node)
local dir = mesecon:piston_get_direction(node)
pos.x, pos.y, pos.z = pos.x + dir.x, pos.y + dir.y, pos.z + dir.z --move to first node being pushed
@ -170,49 +218,9 @@ mesecon:register_on_signal_on(function(pos, node)
mesecon:updatenode(pos)
checknode = nextnode
end
end)
end
--Pull action
mesecon:register_on_signal_off(function(pos, node)
if node.name ~= "mesecons_pistons:piston_normal" and node.name ~= "mesecons_pistons:piston_sticky" then
return
end
local dir = mesecon:piston_get_direction(node)
pos.x, pos.y, pos.z = pos.x + dir.x, pos.y + dir.y, pos.z + dir.z --move to the node to be replaced
--ensure piston is extended
local checknode = minetest.env:get_node(pos)
if checknode.name ~= "mesecons_pistons:piston_pusher_normal" and checknode.name ~= "mesecons_pistons:piston_pusher_sticky" then
return
end
if checknode.param2 ~= node.param2 then --pusher is not facing the same direction as the piston
return --piston is not extended
end
--retract piston
minetest.env:remove_node(pos) --remove pusher
if node.name ~= "mesecons_pistons:piston_sticky" then
nodeupdate(pos)
end
if node.name == "mesecons_pistons:piston_sticky" then --retract block
local checkpos = {x=pos.x + dir.x, y=pos.y + dir.y, z=pos.z + dir.z} --move to the node to be retracted
checknode = minetest.env:get_node(checkpos)
if checknode.name ~= "air"
and checknode.name ~= "ignore"
and minetest.registered_nodes[checknode.name].liquidtype == "none"
and not mesecon:is_mvps_stopper(checknode.name) then
minetest.env:set_node(pos, checknode)
minetest.env:remove_node(checkpos)
mesecon:updatenode(checkpos)
end
end
if node.name == "mesecons_pistons:piston_sticky" then
nodeupdate(pos)
end
end)
-- get push direction
-- get piston direction
function mesecon:piston_get_direction(node)
if node.param2 == 3 then
return {x=1, y=0, z=0}