mirror of
https://github.com/joe7575/techpack.git
synced 2024-10-27 19:09:34 +01:00
52 lines
1.9 KiB
Markdown
52 lines
1.9 KiB
Markdown
# Tubelib Extension with Control Blocks \[tubelib_addons2\]
|
|
|
|
This extension provides Timer, Sequencer, Repeater, Gate, Door, Access Lock, Mesecons Converter and Color Lamp nodes, all with tubelib communication support.
|
|
|
|
|
|
## Timer
|
|
The Timer node allows to send on/off commands to other nodes, e.g. to switch on/off lights at night.
|
|
Up to 6 independent rules with daytime, destination node numbers, and on/off command can be programmed.
|
|
|
|
|
|
## Sequencer
|
|
The Sequencer node allows to define sequences of on/off commands with time gaps in between.
|
|
For this purpose, a sequence of up to 8 steps can be programmed, each with
|
|
destination node numbers, on/off command, and time gap to the next step in seconds.
|
|
The Sequencer can run endless or only once and can be switches on/off by other nodes.
|
|
|
|
|
|
## Repeater
|
|
The Repeater is a concentrator node to distribute received commands to all connected nodes.
|
|
The list of destination node numbers can be programmed by means of the Programmer.
|
|
|
|
|
|
## Gate/Door
|
|
Doors, gates and locks can be build by means of Tubelib Gate and Door nodes.
|
|
With the command 'on' the node disappears, with 'off' it appears again.
|
|
The texture of the node can be configured after placement with the right mouse button.
|
|
|
|
|
|
## Access Lock
|
|
The Access Lock node is a combination lock to open/close gates and doors (active for 4 seconds).
|
|
The list of destination node numbers can be programmed by means of the Programmer.
|
|
|
|
|
|
## Color Lamp
|
|
A set of colored lamps with Tubelib support.
|
|
The color of the lamp can be configured after placement with the right mouse button.
|
|
|
|
|
|
## Mesecons Converter
|
|
The Mesecons Converter node allows the connection of Tubelib nodes with Mesecon wires and vice versa.
|
|
The list of destination node numbers can be programmed by means of the Programmer.
|
|
|
|
|
|
## Programmer
|
|
The Programmer is a tool to collect node numbers (right mouse button) from receiving nodes to program
|
|
sending nodes (left mouse button).
|
|
|
|
|
|
## Dependencies
|
|
tubelib, default
|
|
|