mirror of
https://github.com/joe7575/techpack.git
synced 2024-11-29 18:43:53 +01:00
38 lines
1.9 KiB
Markdown
38 lines
1.9 KiB
Markdown
# Tubelib Library
|
|
|
|
## Hints for Admins and Players
|
|
|
|
Tubelib is little useful for itself, it makes only sense with izs extensions.
|
|
|
|
However, Tubelib provides the following basic nodes:
|
|
|
|
### Tubes
|
|
Tubes allow the item exchange between two nodes. Tube forks are not possible. You have to use chests
|
|
or other inventory nodes as hubs to build more complex structures.
|
|
Tubes for itself are passive. For item exchange you have to use pulling/pushing nodes in addition.
|
|
The maximum tube length is limited to 100 nodes.
|
|
|
|
### Pusher
|
|
The Pusher is able to pull one item out of one inventory node and pushing it into another inventory node directly or by means of tubes.
|
|
It the source node is empty or the destination node full, the Pusher goes into STANDBY state for some seconds.
|
|
|
|
### Distributor
|
|
The Distributor works as filter and pusher. It allows to divide and distribute incoming items into 4 tube channels.
|
|
The channels can be switched on/off and individually configured with up to 6 items. The filter passes the configured
|
|
items and restrains all others. To increase the throughput, one item can be added several times to a filter.
|
|
An unconfigured but activated filter allows to pass up to 6 remaining items.
|
|
|
|
### Button/Switch
|
|
The Button/Switch is a simple communication node for the Tubelib wireless communication.
|
|
This node can be configured as button and switch. For the button configuration different switching
|
|
times from 2 to 16 seconds are possible. The Button/Switch node has to be configured with the destination
|
|
number of the receiving node (e.g. Lamp). This node allows to address several receivers by means or their numbers.
|
|
All numbers of the receiving nodes have to be added a configuration time.
|
|
|
|
### Lamp
|
|
The Lamp is a receiving node, showing its destination/communication number via "infotext".
|
|
The Lamp can be switched on/off by means of the right mouse button (use function) or by means of messages commands
|
|
from a Button/Switch or any other command sending node.
|
|
|
|
|