Tower Crane Mod

In order to simplify the construction of buildings, the crane forms a construction area in which the player can fly (similar to fly privs).

The crane can be completely assembled by setting only the base block. The size of the crane (which is the construction area) can be configured. The owner of the crane get automatically area protection over the complete construction area (therefore the area Mod is required).

Introduction

Place the crane base block. The crane arm will later be build in the same direction you are currently looking
Right-click the crane base block and set the crane dimensions in height and width (between 8 and 24 by default). The crane will be build according to this settings. If there is not enough free space for the crane mast/arm or the potential construction area of the crane intersects a protected area from another player, the crane will not be build.
Right-click the crane switch block to place the hook in front of the crane mast
Enter the hook by right-clicking the hook
"Fly" within the working area (height, width) by means of the (default) controls
- Move mouse: Look around
- W, A, S, D: Move
- Space: move up
- Shift: move down
Leave the hook by right-clicking the hook or right-clicking the crane switch node
To remove the crane, destroy the base block. Hint: The construction area of the crane will also be removed. In order to protect your building again, you have to use the normal chat commands.

To Do:

output the crane hook coordinates in the HUD relative to a predefined reference position

1.8 KiB Raw Blame History

Tower Crane Mod

Introduction

To Do:

License

1.8 KiB

Raw Blame History