mirror of
https://github.com/minetest-mods/towercrane.git
synced 2024-11-22 15:23:51 +01:00
53 lines
2.1 KiB
Markdown
53 lines
2.1 KiB
Markdown
# Tower Crane Mod V0.05
|
|
In order to simplify the construction of buildings, the crane forms a construction area in which the player can fly (similar to fly privs).
|
|
|
|
Browse on: ![GitHub](https://github.com/joe7575/Minetest-Towercrane)
|
|
|
|
Download: ![GitHub](https://github.com/joe7575/Minetest-Towercrane/archive/master.zip)
|
|
|
|
The crane can be completely assembled by setting only the base block.
|
|
The size of the crane (which is the construction area) can be configured.
|
|
The owner of the crane get automatically area protection over the complete construction area (therefore the area Mod is required).
|
|
|
|
![Tower Crane](https://github.com/joe7575/Minetest-Towercrane/blob/master/towercrane640.png)
|
|
|
|
|
|
## Introduction
|
|
* Place the crane base block.
|
|
The crane arm will later be build in the same direction you are currently looking
|
|
|
|
* Right-click the crane base block and set the crane dimensions in height and width (between 8 and 24 by default).
|
|
The crane will be build according to this settings.
|
|
If there is not enough free space for the crane mast/arm or the potential construction area of the
|
|
crane intersects a protected area from another player, the crane will not be build.
|
|
|
|
* Right-click the crane switch block to place the hook in front of the crane mast
|
|
|
|
* Enter the hook by right-clicking the hook
|
|
|
|
* "Fly" within the working area (height, width) by means of the (default) controls
|
|
- Move mouse: Look around
|
|
- W, A, S, D: Move
|
|
- Space: move up
|
|
- Shift: move down
|
|
|
|
* Leave the hook by right-clicking the hook or right-clicking the crane switch node
|
|
|
|
* To remove the crane, destroy the base block.
|
|
**Hint:** The construction area of the crane will also be removed.
|
|
In order to protect your building again, you have to use the normal chat commands.
|
|
|
|
|
|
## To Do:
|
|
- output the crane hook coordinates in the HUD relative to a predefined reference position
|
|
|
|
## Dependencies
|
|
default
|
|
areas (optional)
|
|
|
|
# License
|
|
Copyright (C) 2017 Joachim Stolberg
|
|
Code: Licensed under the GNU LGPL version 2.1 or later. See LICENSE.txt and http://www.gnu.org/licenses/lgpl-2.1.txt
|
|
Textures: CC0
|
|
|