Introduces two functions to unregister and override chatcommands.
minetest.unregister_chatcommand("<name>") and
minetest.override_chatcommand("<name>", {<redifinition>})
When the new set of biomes was added in MTGame the 'spread' for heat
and humidity noise parameters was increased to 1000, i forgot to update
settingtypes.txt and minetest.conf.
Remake the light_decode_table.
The table starts out without pre-filled in values since those
are always discarded by the code apparently. We calculate a
pseudo curve with gamma power function, and then apply a new
adjustment table.
The adjustment table is setup to make the default gamma of 2.2
look decent: not too dark at light level 3 or so, but too dark
at 1 and below to be playable. The curve is much smoother than
before and looks reasonable at the whole range, offering a
pleasant decay of light levels away from lights.
The `display_gamma` setting now actually does something logical:
the game is darker at values below 2.2, and brighter at values
above 2.2. At 3.0, the game is very bright, but still has a good
light scale. At 1.1 or so, the bottom 5 light levels are virtually
black, but you can still see enough detail at light levels 7-8,
so the range and spread is adequate.
I must add that my monitor is somewhat dark to begin with, since
I have a `hc` screen that doesn't dynamic range colors or try to
pull up `black` pixels for me (it is tuned for accurate color and
light levels), so this should look even better on more dynamic
display tunings.
As mgv7 is now the default mapgen i re-checked its tunnel width on request,
discovered they needed to be wider, and have made this change.
This commit widens the identical 3D noise tunnels in the other mapgens in
exactly the same way.
This fixes a bug existing in modmgr.lua as reported by @Wuzzy2 which
caused the mod dependency list to glitch if input was using a line
terminator different than the OS default.
The C++ code does not need any changes as it already trims CR
occurrences on platforms on which the line termination sequence is LF.
Taken into account the size of the depends.txt files used, this should
not introduce a noticeable performance regression.
Fixes#4720
It would complain that the value should be higher than the lower
bound, when it should be higher than or equal to the lower bound.
Similar issue for the upper bound.
This combats the problem of sending the hundreds of
"creative" / "armor" or whatever detached invs that
exist on popular servers to each and every player
on join or on change of said invs.
If a tool wears out and is destroyed, it's itemstack count
goes to 0, and we can optionally play a breaking sound.
This patch implements playing a breaking sound when this
occurs. Sounds need to be added to the tool itemdef
registration as the sound name string in the .sound.breaks
member.
Fixes#4778 which was about the error:
ServerError: Lua: Runtime error from mod '' in callback item_OnPlace():
/usr/local/share/minetest/builtin/game/item.lua:278: attempt to call global 'check_attached_node' (a nil value)
The issue was a regression of commit 649448a2a91fbf3e944b2f2e739f4e2292af1df0
"Rename nodeupdate and nodeupdate_single and make them part of the official API"
Now, the renamed forms of nodeupdate and nodeupdate_single are part of the official API.
As nodeupdate has been used by Minetest Game and in mods despite of not
being part of the official API, we ease the transition by still supporting
it for the 0.4.15 release. After the release, the two functions can be removed.
The removal will not violate the stability promise, as that promise only
includes the official and documented API.
Also, make some formerly global functions local. They most likely haven't
been used by mods, therefore they won't get stubs with deprecation warnings,
hard erroring directly.
Original commit by t4im, rebased and developed by paramat.
Fix CONTENT_IGNORE being replaced by falling nodes or causing large
areas of sand to collapse into itself.
Format some conditional code for clarity.
Add and clarify some comments.
Move static object storage force-delete message from errorstream to
warningstream.
Increase 'max objects per block' setting to 64.
Add missing spaces in warning code.
The fallback vector is in case 'wallmounted to dir' is nil due
to voxelmanip placing a wallmounted node without resetting a
pre-existing param2 value that is out-of-range for wallmounted.
The fallback vector corresponds to param2 = 0.
Re-add documentation of noise parameter formats.
Re-add 'mgv5_np_ground' noise parameters in group format.
Both these were deleted through auto-generation of conf.example.
Add note to builtin/mainmenu/dlg_settings_advanced.lua that this
documentation must be preserved.
Add 'core.LIGHT_MAX = 14' to builtin/game/constants.lua with the intention
to replace misplaced 'default.LIGHT_MAX = 14' in Minetest Game.
Add comment in light.h requiring the constant be changed in both places.
Add lighting bug warning to note in lua_api.txt.
There are hundreds of mod uses of 15 which causes a lighting bug.
Disable the ability to connect to old servers by default to
improve password security.
If people still want to connect to old (0.4.12 and earlier)
servers, they can flip the send_pre_v25_init setting.
Add the ability to detect if we've tried to connect
to a server which only supports the pre v25 init protocol,
and show an apropriate error message. Most times the error
will already be catched at the serverlist level, the
detection mechanism only acts as last resort, because the
"Connection timed out" error message that would be shown
otherwise would be very confusing.
Automatic "fixing" of this condition is not desired,
as it would allow for downgrade attacks.
As already 161 of the 167 servers on the serverlist
support the new srp based auth protocol (> 96%),
the breakage should be minimal.
Follow up of commit
af30183124d40a969040d7de4b3a487feec466e4 "Add option to not send pre v25 init packet"
Also change the pessimistic assumption of masterlist
server versions to optimistic, in order to avoid buggy
behaviour (favourites not in the serverlist would be
denied to connect to, etc).
Avoids unreachable code linter warning by moving generation code
(of minetest.conf.example and settings_translation_file.cpp)
out of dlg_settings_advanced.
Due to passing the settings, also it avoids reading the settings file twice.
Instead of activating the code by changing the active if-clauses,
its activation is now done by uncommenting the loadfile() statement.
core.check_player_privs accepts as first argument a name or player object, but just tested for a string.
This caused crashes inside builtin, when being passed any unexpected types.
This provides a better (duck-typing like) test, better error reporting.
Use the setting "profiler.load" to enable profiling.
Other settings can be found in settingtypes.txt.
* /profiler print [filter] - report statistics to in-game console
* /profiler dump [filter] - report statistics to STDOUT and debug.txt
* /profiler save [format [filter]] - saves statistics to a file in your worldpath
* txt (default) - same treetable format as used by the dump and print commands
* csv - ready for spreadsheet import
* json - useful for adhoc D3 visualizations
* json_pretty - line wrapped and intended json for humans
* lua - serialized lua table of the profile-data, for adhoc scripts
* /profiler reset - reset all gathered profile data.
This can be helpful to discard of any startup measurements that often spike during loading or to get more useful min-values.
[filter] allows limiting the output of the data via substring/pattern matching against the modname.
Note: Serialized data structures might be subject to change with changed or added measurements.
csv might be the most stable, due to flat structure.
Changes to the previous version include:
* Updated and extended API monitoring
* Correct calculation of average (mean) values (undistorted by idleness)
* Reduce instrumentation overhead.
* Fix crashes related to missing parameters for the future and occasional DIV/0's.
* Prevent issues caused by timetravel (overflow, timejump, NTP corrections)
* Prevent modname clashes with internal names.
* Measure each instrumentation individually and label based on registration order.
* Labeling of ABM's and LBM's for easier classification.
Giving several ABM's or LBM's the same label will treat them as one.
Missing labels will be autogenerated based on name or registration order.
* Configurable instrumentation and reporting. Skip e.g. builtin if you don't need it.
* Profile the profiler to measure instrumentation overhead.
It seems that various different devices register as
Joysticks on linux, and their presence has caused
lots of confusion amongst minetest users.
Therefore, disable the joystick feature.
Closes#4261Closes#4221
Reduce spread from 96 to primes 61 and 67 (either side of 64)
Prime spreads help to keep 3D noise periodic features unaligned
'cave width' 0.2 to preserve tunnel width
Reduce octaves to 3 to improve network structure
This allows a nodedef to specify a fixed value for param2 to be
used for all normal placements.
There are several uses for this:
- nodes that require param2 to be set to a non-zero value for
internal mod use. E.g. leafdecay could use this to detect that
leaves are played by players.
- force wallmounted or facedir value at placement at placement
This overrides any player look direction or other on-the-fly
param2 setting during placement.
The change keys dialog can't be left. It doesn't make
much sense to show it on Android in the first place,
therefore disable it, just like commit
aed70cb0b652d6cb2272e7b94cd56671b3df6239 'Disable sound and key binding settings in "pause" menu on android'
has disabled it for the esc menu.
Fixes#4115.
This seems very little cost and matches the old behavior more
closely. This will cause some more falling nodes to get added
to falling clusters. With the efficiency of the algorithm, this
really doesn't do much damage.
@SmallJoker has noted a bug that servers from the (local) main menu
favorites list can't be opened.
This commit fixes the bug by disabling any main menu based protocol
checks for servers from the favorite list.
Also, it fixes a second bug that happens when a server from the
public serverlist doesn't send its supported protocol versions,
most likely because its running a minetest older than commit [1].
Then we have shown an error msg that the server has enforced
one specific protocol version. This was most likely not the case.
Of course, we can't do anything better than do an assumption on
the protocol versions if they are not known. That assumption
should however be closest to the most often occuring case as
possible.
Also, some little cleanups.
[1]: 5a0ed780f56a5225b3d7c5f64099586e390e5f39 "Server: announce MIN/MAX protocol version supported to serverlist. Client: check serverlist"
This took me a while to figure out. We no longer visit all 9 block
around and with the touched node, but instead visit adjacent plus
self. We then walk -non- recursively through all neigbors and if
they cause a nodeupdate, we just keep walking until it ends. On
the way back we prune the tail.
I've tested this with 8000+ sand nodes. Video result is here:
https://youtu.be/liKKgLefhFQ
Took ~ 10 seconds to process and return to normal.
- Use local variables for tabs in place of globals
- Merge together if statements where possible
- Replace manual table searching code with indexof where possible
2016-03-27 15:47:01: ERROR[Main]: ServerError: Lua: Runtime error from mod '*builtin*' in callback luaentity_Step(): Node name is not set or is not a string!
2016-03-27 15:47:01: ERROR[Main]: stack traceback:
2016-03-27 15:47:01: ERROR[Main]: [C]: in function 'add_node'
2016-03-27 15:47:01: ERROR[Main]: /usr/share/minetest/builtin/game/falling.lua:96: in function </usr/share/minetest/builtin/game/falling.lua:43>
Commit
65c09a96f41705bb8e75fc5ff4276342be91ed11 "Set acceleration only once in falling node"
has made the acceleration being set only once.
But this has introduced a regression.
Fix#3884.
Undoubtably this may cause problems later if unchecked.
```
2016-03-22 21:57:52: WARNING[Server]: Assignment to undeclared global "options" inside a function at .../sofar/git/minetest/bin/../builtin/game/chatcommands.lua:862.
```
ABM's are hardcoded to run every 1.0s, NodeTimers are hard coded to
run at every 1.0s. Block mgmt is running every 2.0sec.
However, these timers can be better tuned for both higher and lower
values by server owners. Some server owners want to, and have the
resources to send more packets per second to clients, and so they
may wish to send smaller updates sooner. Right now all ABM's are
coalesced into 1.0 second intervals, resulting in large send queues
to all clients. By reducing the amount of possible timers, one can
get a far better response rate and lower the perception of lag.
On the other side of the camp, some servers may want to increase
these values, which again isn't easily doable.
The global settings abm_interval and nodetimer_interval are set to
current values by default. I've tested with 0.2/0.5 type values
and noticed a greatly improved response and better scattering of
nodetimers, as well as enjoying not faceplanting into doors with
pressure plates anymore.
The legacy init packet (pre v25) sends information about the client's
password that a server could use to log in to other servers if the
username and password are the same. All the other benefits of SRP of
protocol v25 are missed if the legacy init packet is still sent during
connection creation.
This patch adds an option to not send the v25 init packet. Not sending
the v25 packet means breaking compat with pre v25 servers, but as the
option is not enabled by default, no servers are affected unless the
user explicitly flips the switch. More than 90% of the servers on the
serverlist support post v25 protocols.
The patch also fixes a bug with greying out of non compliant servers
being done wrongly, the min and max params were mixed.
This privilege allows map protection bypassing for server operators
and world moderators.
Initially I had thought that bypassing protection mods would have been
something that could entirely be done inside mods and minetest_game,
but the concept of protection is defined in core, in the code of
core.is_protected().
I don't feel that it would be logical to introduce a protection
concept in core, but not some way around that for server operators
to maintain map parts that need fixing, de-griefing or cleanup.
Others had noticed the same problems, and proposed a patch to
minetest_game. That patch is fine by itself, but it fails to add
protection bypass functionality for digging normal nodes and placing
nodes.
So, instead, we indroduce the new priv "protection_bypass" in core,
and modify 'on_place_node' and 'node_dig' to allow bypassing node
protections if the player holds this priv.
This priv was tested with protector redo by tenplus1.
A followup patch to Minetest Game will include allowing special checks
for doors, trapdoors, chests in Minetest Game.
Protection mods will likely want to mimic the changes in their relevant
code sections.
I've written several experimental bits of code that revolve around the
need for a consistent calendar, but implementing one is extremely hard
in mods due to time changes and mods overriding core.get_timeofday(),
which will conflict.
The second part of the problem is that doing this from a mod requires
constant maintenance of a settings file.
An implementation in core is trivial, however, and solves all of
these problems at virtually no cost: No extra branches in server
steps, and a single branch when minetest.set_time_of_day(), which is
entirely reasonable.
We store the day_count value in env_meta.txt.
The use case is obvious: This change allows mods to create an actual
virtual calendar, or properly account for seasonal changes, etc..
We add a "/days" chatcommand that displays the current day count. No
permissions are needed. It can only retrieve the day count, not
modify it.
This allows mods to perform both asynchronous and synchronous HTTP
requests. Mods are only granted access to HTTP APIs if either mod
security is disabled or if they are whitelisted in any of the
the secure.http_mods and secure.trusted_mods settings.
Adds httpfetch_caller_alloc_secure to generate random, non-predictable
caller IDs so that lua mods cannot spy on each others HTTP queries.
This makes the functions a bit faster since they don't
have to recreate the tables every invocation, and makes
the code more readable.
Also, document `wallmounted_to_dir`.
The function was implemented but not documented in `lua_api.txt`.
The engine implementation of `print` packs the varargs into a
table and passes the table directly to `table.concat`. If you
pass any value not supported by `table.concat` (particularly
`nil`), the server crashes. This is unexpected behavior, as
`print` is supposed to be able to work with anything.
This patch changes the implementation so it first converts
all arguments using `tostring`, which fixes the issue and
makes the custom `print` function compatible with the stock
Lua behavior.
Replace simple caves with V5 caves, adding unpredictable water and lava
settings and massive caves based on subterrain. Remove fast terrain mode
and accompanying settings. Remove superfluous temperature/humidity
settings. Remove lava/water height setting. Fix errors in humidity
handling and remove humidity_break_point setting. Move cave noises to
generateCaves. Fix minor formatting/naming issues and use
MYMAX/MYMIN/myround.
