PLAYER_MAX_BREATH_DEFAULT was earlier set to 11, so that 10 bubbles are shown before the breath bar disappears.
Now, PLAYER_MAX_BREATH_DEFAULT is set to 10, and the breath_bar scaling code in builtin has been tweaked to show all 10 bubbles before hiding the breath_bar
* minetest.serialize: Reversible number to string conversion
The %a format is not supported in Lua 5.1.
This commit also adds two tests for number serialization.
This will likely be more intuitive for users and should play better
with sandboxed distributions such as Flatpak.
In addition, the screenshot directory will now be created if it doesn't
exist already.
The game.conf has a disallowed_mapgens option. However, some games
require a certain mapgen to be used, like the CTF plugin. This change
adds an option to specify allowed mapgens so that the setting can be
specified in a way that needn't be updated as map generators are added
to Minetest.
Camera's near-plane will be hard-coded to 0.1 on all non-Android platforms. The upper-bound of this setting has been reduced to 0.25, as 0.5 is just way too high.
* Fix pathfinder fail when startpos is over air
* Note down pathfinder restrictions
* Implement real A* search
* Pathfinder: Implement buildPath non-recursively
* Update find_path documentation
* Pathfinder: Check if jump path is unobstructed
* Pathfinder: Fix drop check first checking upwards
* Pathfinder: Return nil if source or dest are solid
* Pathfinder: Use priority queue for open list
Low-disruption first step towards removing the hardcoded cave liquid
code. Since MT 5.0.0 cave liquids can be defined and located by
biome definitions instead.
In games that do not yet use biome definitions to define and locate
cave liquids (MTGame does), lava will now appear below
y = water_level - 256 instead of below 'lava depth' (usually y = -256).
Therefore no change in most mapgens if using the default 'lava depth'.
Previously, the only way to disable the 3D noise tunnels was to set
'cave width' > 1.0, however doing so did not disable the very intensive
noise calculations or the generation loop.
All the other types of cave generation (randomwalk caves, caverns)
can already be independently and completely disabled.
This feature is now needed more because the small randomwalk caves are
now available for use as an alternative to the 3D noise tunnels.
Add mapgen parameters to set the range of the random number of
randomwalk caves per mapchunk, and to set the proportion that are
flooded with liquids.
Default values are, for now, unchanged from the previous hardcoded
values.
Add parameters to allow small randomwalk caves
Disabled by default for now as they have never been present in the
non-mgv6 mapgens.
Revert gamma upper limit to 3.0 because that was raised based on
a misunderstanding and had no benefit. A sane upper limit is
needed as players on a competitive server tend to use the maximum.
Set gamma lower limit to 0.33 for consistency with 3.0.
Set sane limits on alpha, beta, boost and enforce these in code
to limit values entered in minetest.conf and to avoid easy cheating
by editing settingtypes.txt.
Improve documentation and 'readable' setting names.
Clarify that gamma does not significantly affect natural night light.
light.cpp: Various codestyle and comment improvements.
All on_* hooks that return an itemstack are NOT guaranteed to
modify and return the original stack. We cannot count on the
behavior of the existing builtin definitions not to be overridden
by game/mod logic.
Previously, the 'rivers' checkbox was missing for mgcarpathian, caused by the 'possible flags' order: 'caverns,nocaverns,rivers,norivers'.
Also reorder mgcarpathian 'possible flags', but only for consistency.
The setting now accepts values between 1 and 8 in the
Advanced Settings menu.
Values 0 and 1 now behave the same way (setting it to 1 won't
disable MSAA anymore), so there's no need to expose 0 as a value.
This closes#8939.
Before opening the file for writing, its file size is tested. If it exceeds 50 MB, it is moved to debut.txt.1, otherwise the log is appended to the old messages. An old debut.txt.1 is removed if it already exists.
Improve 'readable' setting names for waving water settings.
Change 'near plane' to 'near clipping plane'.
Document physics settings.
mgv6_spflags:
Change 'new biome system' to 'snowbiomes flag' for clarity.
Add missing 'noflat' flag to default flags.
Document new meaning of immortal=1 for players
Disable breathing if player is immortal
Hide builtin statbars if player immortal (delayed)
Co-authored-by: ClobberXD <ClobberXD@gmail.com>
v6 always last to discourage selection.
Special mapgens flat, fractal, singlenode, next to last. Of these, singlenode
last to discourage selection.
Of the remaining, v5 last due to age, v7 first due to being the default.
Rivers are disabled by default and will not be added to existing worlds.
Rewrite getSpawnLevelAtPoint() to be simpler and more consistent with
generateTerrain().
saves the forceloaded blocks periodically.
checks every 10 seconds if the forceloaded blocks got changed in-game
and persists them on-disk if that's the case
Add user-settable noise parameters for dungeon density to each mapgen,
except V6 which hardcodes this noise parameter.
Move the calculation of number of dungeons generated in a mapchunk out
of dungeongen.cpp and into mapgen code, to allow mapgens to generate
any desired number of dungeons in a mapchunk, instead of being forced
to have number of dungeons determined by a density noise.
This is more flexible and allows mapgens to use dungeon generation to
create custom structures, such as occasional mega-dungeons.
6125 is the time of first full light according to 'get_node_light()',
and the time of first full light visually when basic shaders are on.
This is the optimum default new world start time, taking all possible
games into account.
The previous time assumed a game similar to Minetest Game. Games
should set this setting themselves according to their needs.
Makes the liquid waving shader per-nodedef like waving leaves/plants,
instead of being applied to all liquids.
Like the waving leaves/plants shaders, the liquid waving shader can
also be applied to meshes and nodeboxes.
Derived from a PR by t0ny2.
* Do not always show every depends textfieds
When there are no dependencies, it does not longer show an empty list.
* Adjust the list height to avoid a scrollbar when possible
* change minimum height and no dependencies message
* Do not get depends for modpacks
* Add sounds for falling and attached nodes
The sound specified in `node_definition.sounds.fall` is used.
When a falling node is spawned at a position or an attached node drops, the sound is played at this position.
* allow all sorts of soundspecs
Centralize HUD updating in update_builtin_statbars.
Fixes race condition in 'on joinplayer' that causes stat bar bugs.
Correctly scales stat bars to custom max values set by mods.
This patch will make distinguishable mods in modpacks possible in the future
`nil` checks are required to provide backwards-compatibility for fresh configured worlds
Previously, when the CSM restriction 'LOAD_CLIENT_MODS' was used a
client was still able to add CSM code to 'builtin' to bypass that
restriction, because 'builtin' is not yet verified.
Until server-sent CSM and verifying of 'builtin' are complete, make
'LOAD_CLIENT_MODS' disable the loading of builtin.
Clarify code comments and messages to distinguish between client-side
modding and client-side scripting. 'Scripting' includes 'builtin',
'modding' does not.
In pitch fly mode, you fly to the exact direction you are pointing at, using the forward key. Other move directions are also pitched accordingly.
It allows smoother and more complex movements.
Can be enabled/disabled by L key by default (set keymap_pitchfly in minetest.conf)
Use the CSM death formspec when CSM is enabled and use the engine death formspec when CSM is disabled.
Move the CSM death formspec code to a dedicated file.
Works by detecting a collision while moving forward and then
simulating a jump. If the simulated jump is more successful,
an artificial jump key press is injected in the client.
Includes setting and key change GUI element for enabling and
disabling this feature.
Add missing 'core.formspec_escape' to 'get_screenshot'.
Add warning label when no packages fetched.
Internal name of the "Update" button was the same as "Install". Rename to 'update_'.
Calling string.split(":A:B:C:D", ":") returns an empty array.
This is due to first empty string not making repeat loop decreasing max_split which has a 0 value when reaching until.
Changing max_splits default value from -1 to -2 fixes that issue.
Improvements:
1. Formspec size and description box are calculated last
2. Width and height are now adjustable per setting type
3. Error message (dialogdata.error_message) shortens the description field and is placed below
4. Add more spacing for larger fonts
5. More comments and extensible by setting different height and width values
Make tunnels wider and use the noise parameters of most other mapgens.
All other underground features are already identical to all other
non-mgv6 mapgens, this final change modernises and improves the tunnels.
* Fix textarea formspec documentation
The label is shown and the background isn't
* Document the missing gamma correction when generating mip maps
* Remove duplicate text (such as size parameter descriptions)
Add 2 new mapgen flags to make river depth variation and humidity drop
with altitude independently optional, instead of both being enabled by
the 'humid rivers' flag.
Simplify and clarify related code by removing a low priority
optimisation regarding 't_heat'.
Remove unnecessary optimisation bools and use spflags directly instead.
Improve and fix documentation in settingtypes.txt.
A few minor code cleanups.
