Commit Graph

290 Commits

Author SHA1 Message Date
Auke Kok
094a5a73d3 Redo light.cpp.
Remake the light_decode_table.

The table starts out without pre-filled in values since those
are always discarded by the code apparently. We calculate a
pseudo curve with gamma power function, and then apply a new
adjustment table.

The adjustment table is setup to make the default gamma of 2.2
look decent: not too dark at light level 3 or so, but too dark
at 1 and below to be playable. The curve is much smoother than
before and looks reasonable at the whole range, offering a
pleasant decay of light levels away from lights.

The `display_gamma` setting now actually does something logical:
the game is darker at values below 2.2, and brighter at values
above 2.2. At 3.0, the game is very bright, but still has a good
light scale. At 1.1 or so, the bottom 5 light levels are virtually
black, but you can still see enough detail at light levels 7-8,
so the range and spread is adequate.

I must add that my monitor is somewhat dark to begin with, since
I have a `hc` screen that doesn't dynamic range colors or try to
pull up `black` pixels for me (it is tuned for accurate color and
light levels), so this should look even better on more dynamic
display tunings.
2016-12-28 14:16:39 -08:00
Lars Hofhansl
2f59a0c840 Process ABMs in a spherical volume instead of cubic
Increase active_block_range default to a 3 mapblock radius.
2016-12-24 00:28:39 +00:00
sfan5
09f1a0c1ff Disable mod security by default (closes #4944) 2016-12-21 14:13:10 +01:00
Auke Kok
78bf7c46e5 Mapgen: Make mgv7 the default in UI
The actual menu default comes from defaultsettings.cpp.
2016-12-16 12:31:38 +00:00
paramat
f8408398f5 Cavegen: Wider tunnels in mgflat, mgfractal, mgvalleys
As mgv7 is now the default mapgen i re-checked its tunnel width on request,
discovered they needed to be wider, and have made this change.
This commit widens the identical 3D noise tunnels in the other mapgens in
exactly the same way.
2016-12-14 06:28:45 +00:00
est31
211d919b54 Update minetest.conf.example and settings_translation_file.cpp 2016-12-14 00:30:39 +01:00
sfan5
0d94bfabcc Mgv7: Change default cave width to 0.09 2016-12-13 03:32:51 +00:00
Rogier
02112f84e2 View range: Set maximum to 4000 nodes
The network protocol does not support larger than 255 mapblocks.
2016-12-12 07:20:50 +00:00
Lars Hofhansl
075833e393 Fog: Make fraction of visible distance at which fog starts configurable
Optimise the fetching of global settings 'camera_smoothing',
'cinematic' and 'cinematic_camera_smoothing'.
Cache 'cam_smoothing'.
2016-12-07 04:07:54 +00:00
paramat
bc3980e1d6 Mgv7: Add optional floatlands, disabled by default 2016-11-15 23:07:06 +00:00
Lars Hofhansl
c79370023b Conf.example: Document block_send_optimize_distance
Add missing documentation.
2016-11-08 15:22:42 +00:00
paramat
63a3bb229a Changes to static object storage limit and error message
Move static object storage force-delete message from errorstream to
warningstream.
Increase 'max objects per block' setting to 64.
Add missing spaces in warning code.
2016-10-20 03:40:47 +01:00
ShadowNinja
2ff054d041 Enable mod security by default 2016-10-16 01:14:54 +01:00
SmallJoker
b6569f1c69 Add missing languages to the settings 2016-10-11 07:32:47 +02:00
Loic Blot
d4c76258e3 Chat: new settings to prevent spam
Added the following chat coreside features
* Chat messages length limit
* Message rate limiting
* Message rate kicking

Note:
* handleChat now takes RemotePlayer pointer instead of u16 to remove useless
  lookups
2016-10-05 00:13:37 +02:00
paramat
cd2c8ade2d Conf.example: Re-add deleted noise parameter documentation
Re-add documentation of noise parameter formats.
Re-add 'mgv5_np_ground' noise parameters in group format.
Both these were deleted through auto-generation of conf.example.
Add note to builtin/mainmenu/dlg_settings_advanced.lua that this
documentation must be preserved.
2016-09-23 19:01:31 +01:00
James Stevenson
679c8de63f Increase default font size by 1 2016-09-21 08:04:11 +02:00
Rui
3b0f7659c7 Document keymap_autorun in settingtypes.txt and minetest.conf.example (#4486) 2016-08-30 05:40:48 +02:00
est31
1f2ff860f5 Update minetest.conf.example and settings_translation_file.cpp 2016-08-30 04:40:54 +02:00
est31
d767f025cb Client: disable pre v25 init sending by default
Disable the ability to connect to old servers by default to
improve password security.

If people still want to connect to old (0.4.12 and earlier)
servers, they can flip the send_pre_v25_init setting.

Add the ability to detect if we've tried to connect
to a server which only supports the pre v25 init protocol,
and show an apropriate error message. Most times the error
will already be catched at the serverlist level, the
detection mechanism only acts as last resort, because the
"Connection timed out" error message that would be shown
otherwise would be very confusing.

Automatic "fixing" of this condition is not desired,
as it would allow for downgrade attacks.

As already 161 of the 167 servers on the serverlist
support the new srp based auth protocol (> 96%),
the breakage should be minimal.

Follow up of commit

af30183124d40a969040d7de4b3a487feec466e4 "Add option to not send pre v25 init packet"

Also change the pessimistic assumption of masterlist
server versions to optimistic, in order to avoid buggy
behaviour (favourites not in the serverlist would be
denied to connect to, etc).
2016-08-22 20:23:28 +02:00
Ben Deutsch
d1df09841d Document zoom_fov in settingtypes.txt and minetest.conf.example 2016-08-10 12:18:25 +02:00
est31
f833159a68 Update minetest.conf.example and the settings translation file 2016-07-24 17:41:36 +02:00
est31
24ca754bd5 Update minetest.conf.example, and settings_translation_file.cpp 2016-07-12 20:49:33 +02:00
rubenwardy
538af97d8d Remove cinematic toggle on F8
Also update cinematic mode's description to include mouse
2016-07-05 19:50:30 +02:00
paramat
9997e2030c Mgflat/fractal/v7/valleys: Denser 3D noise tunnels
Reduce spread from 96 to primes 61 and 67 (either side of 64)
Prime spreads help to keep 3D noise periodic features unaligned
'cave width' 0.2 to preserve tunnel width
Reduce octaves to 3 to improve network structure
2016-06-24 02:17:51 +01:00
paramat
01a784bd11 Documentation: Remove incorrect and excessive mapgen flags text 2016-05-16 05:14:15 +01:00
est31
063be8a126 Update settings translation file and minetest.conf.example 2016-05-05 16:12:58 +02:00
paramat
8b1f8e99cf Mapgen: Make 3D noise tunnels' width settable
Correct parameter names mg_valleys to mgvalleys
Remove biome NoiseParams from MapgenValleysParams
Improve format of parameter code
2016-04-28 23:36:19 -04:00
rubenwardy
17bfe2fe5b Builtin: Add basic_privs setting 2016-04-28 07:19:07 +01:00
TriBlade9
6530ed4dd8 Add option to disable entity selectionboxes. (#3992)
Setting only loaded once, default value is to enable them.
2016-04-14 11:20:11 +02:00
paramat
630f453da4 Mgv7: Decrease cliff steepness 2016-03-30 01:53:14 +01:00
Auke Kok
c5c727d627 Allow NodeTimer, ABM and block mgmt interval changes.
ABM's are hardcoded to run every 1.0s, NodeTimers are hard coded to
run at every 1.0s. Block mgmt is running every 2.0sec.

However, these timers can be better tuned for both higher and lower
values by server owners. Some server owners want to, and have the
resources to send more packets per second to clients, and so they
may wish to send smaller updates sooner. Right now all ABM's are
coalesced into 1.0 second intervals, resulting in large send queues
to all clients. By reducing the amount of possible timers, one can
get a far better response rate and lower the perception of lag.

On the other side of the camp, some servers may want to increase
these values, which again isn't easily doable.

The global settings abm_interval and nodetimer_interval are set to
current values by default. I've tested with 0.2/0.5 type values
and noticed a greatly improved response and better scattering of
nodetimers, as well as enjoying not faceplanting into doors with
pressure plates anymore.
2016-03-19 17:56:26 +00:00
est31
af30183124 Add option to not send pre v25 init packet
The legacy init packet (pre v25) sends information about the client's
password that a server could use to log in to other servers if the
username and password are the same. All the other benefits of SRP of
protocol v25 are missed if the legacy init packet is still sent during
connection creation.

This patch adds an option to not send the v25 init packet. Not sending
the v25 packet means breaking compat with pre v25 servers, but as the
option is not enabled by default, no servers are affected unless the
user explicitly flips the switch. More than 90% of the servers on the
serverlist support post v25 protocols.

The patch also fixes a bug with greying out of non compliant servers
being done wrongly, the min and max params were mixed.
2016-03-15 17:20:09 +01:00
Diego Martinez
2c72f6da7b Add options for screenshot format and quality 2016-03-12 17:12:43 -05:00
paramat
20312fda18 Documentation: Auto-update conf.example and settings_translation_file.cpp 2016-03-12 04:03:43 +00:00
paramat
6f325070dd Documentation: Clarify global and mapgen-specific mapgen flags 2016-03-11 21:09:59 +00:00
Muhammad Rifqi Priyo Susanto
75db0543f3 Add forgotten valleys mapgen in mapgen name
Missing `valleys` in `settingtypes.txt` and `minetest.conf.example`.
2016-03-05 16:06:27 +01:00
est31
158bd76e87 Update po files, minetest.conf.example and settings_translation_file.cpp 2016-02-27 05:50:42 +01:00
RealBadAngel
8eb7ddb0a2 Remove new_style_water 2016-02-26 00:50:46 +00:00
RealBadAngel
b2aabdfe07 Camera: remove auto tune FPS, single view range setting 2016-02-21 18:18:13 +01:00
RealBadAngel
2f4cf0bcca Remove preload_item_visuals code
Closes #3748
2016-02-21 17:46:50 +01:00
paramat
7e5eea9ad5 Documentation: Remove now unused 'vertical spawn range' 2016-02-11 04:23:26 +00:00
RealBadAngel
eb3840a3f8 Filmic HDR tone mapping 2016-02-09 02:55:59 -05:00
RealBadAngel
b44da4916a Cleanup selection mesh code, add shaders for halo and selection boxes 2016-02-08 03:57:42 -05:00
RealBadAngel
6cd2b3b445 Use meshes to display inventory items 2016-02-07 19:51:55 +01:00
Duane Robertson
80c7612e76 Mgvalleys: use standard caves
Replace simple caves with V5 caves, adding unpredictable water and lava
settings and massive caves based on subterrain. Remove fast terrain mode
and accompanying settings. Remove superfluous temperature/humidity
settings. Remove lava/water height setting. Fix errors in humidity
handling and remove humidity_break_point setting. Move cave noises to
generateCaves. Fix minor formatting/naming issues and use
MYMAX/MYMIN/myround.
2016-01-31 22:31:25 +00:00
Duane Robertson
3c6b2ffb10 Add Valleys mapgen. 2016-01-14 05:04:29 +00:00
paramat
3e0ea3c6ed Mgflat: Set blank default spflags. Unhide 2016-01-10 04:07:47 +00:00
Dalai Felinto
9943ae3f1a New 3D Mode: Pageflip
The pageflip mode requires a stereo quadbuffer, and a modern graphic
card. Patch tested with NVidia 3D Vision.

The mini-map is not drawn, but that's what is done for topbottom and
sidebyside modes as well.

Also most of the time the user would prefer the HUD to be off. That's
for the user to decide though, and toggle it manually.

Finally, the interocular distance (aka eye separation) is twice as much
as the "3d_paralax_strength" settings. I find this a strange design
decision. I didn't want to chance this though, since it's how the other
3d modes interpret this settings.
2016-01-09 16:52:29 +01:00
paramat
c26eb87aec Mgfractal: Add 3D and 4D fractals
3D Mandelbrot/Mandelbar
3D Christmas Tree
3D Mandelbulb
3D Cosine Mandelbulb
4D Mandelbulb
Plus corresponding julia set for each
Add credits for formulas
Rename parameter 'formula' to 'fractal'
Speed optimisations
2015-12-15 04:18:19 +00:00