* Alternative code for slipping
- does not depend on frame rate
- controllable via environment variables for now
* Adjust slipping speed for item entities too.
* Final version of framerate-independent slippery code
* Remove dead code and fix formatting
* getStandingNodePos should only look 0.05 nodes downwards
This ensures that, even if the player is standing on a partially
filled node, this node is used as the standing node and not the
node below it.
Specific use: enables slippery slabs
* Exchange global getStandingPosNode change for local inline change
Reverts previous commit
* Revert the item movement changes
* Slippery nodes now slip over cliffs and edges
Players no longer suddenly stop before falling off.
Also refactored slippery code into getSlipFactor method.
* Slipping over an edge gated by player's is_slipping state
A new flag for just this case, to reduce costly node lookups in
the normal case of leaning over a non-slippery edge.
Public access for consistency and potential future uses.
* Minor code tweaks / cosmetics
* Add temp variable to improve readability and fix indentation issues
* Use Environment interface instead of ClientEnvironemnt
* Don't create slippery variable and then re-affect it
* itemgroup_get return a int, properly test != 0 to be clearer
Fix taking damage caused by sneaking over a nodebox gap.
Fix strange behaviour on stair nodeboxes.
Enable jumping from node edges while sneaking.
Enable movement around corners while sneaking on a 1-node-high groove in a wall.
* C++11 patchset 10: continue cleanup on constructors
* Drop obsolete bool MainMenuData::enable_public (setting is called with cURL in server loop)
* More classes cleanup
* More classes cleanup + change NULL tests to boolean tests
Recent commit 45ab62d6a3d90ab3b97aec88251a766cb5dd1899 had a coding error that
made climbing out of water difficult due to an incorrect value of the step height
when not 'touching ground'.
It also incorrectly multiplied the custom stepheight by BS, resulting in being
able to step-up 2 nodes if set to the default of 0.6, or even 0.3.
Also the implementation was wrong because it customised the step height when
not 'touching ground', this step height is for a slight rise when catching the
edge of a node during a jump, and should always remain at 0.2 * BS.
The 'sneak glitch' physics override now controls whether a player can
use the new move code replications of the old sneak side-effects:
sneak ladders and 2 node sneak jump. This completes our intention to
replicate the old sneak side-effects in new code and provide them as
an option that is disabled by default.
Temporary option for the old move code for specific old sneak behaviour.
Enabled by setting the added 'new move' physics override to false.
By default 'new move' is true.
Re-creates the old sneak-jump behaviour in new code.
Enabled by the 'sneak glitch' physics override.
When a ledge is detected the jump speed modifier is set to the larger
of 'physics override jump' and 1.3 to allow a 2-node climb-up.
An unexpected side-effect is the simple sneak ladder working smoothly.
Sneaking won't actually hover you in the air, releasing shift guarantees not
falling down (same as in MC).
Sneak-jump no longer goes higher than a normal jump (^ was required for this).
Sneaking no longer avoids fall damage.
You can sneak on partial nodes (slabs, sideways slabs) correctly.
Sneaking doesn't "go out" as far anymore (0.29 instead of 0.4).
Can't jump when sneaking out as far as possible (breaks the sneak ladder).
Fix footstep sounds coming from nodes to either side when walking on a
1 node wide row of nodebox slabs such as default:snow.
Fix sand footsteps when swimming in 1 node deep water.
Use a new function 'getFootstepNodePos()' instead of 'getStandingNodePos()'
to avoid using a horizontally-offset 'sneak node' for sounds.
Sound is selected from the node BS * 0.05 below the player's feet, so
that 1/16th slabs will play the slab sound but 1/32nd slabs will not.
If the player is not 'touching ground' the node detection position is
changed to BS * 0.5 below to preserve footstep sounds when landing after
a jump or fall.
* Environment code refactoring
* Cleanup includes & class declarations in client & server environment to improve build speed
* ServerEnvironment::m_gamedef is now a pointer to Server instead of IGameDef, permitting to cleanup many casts.
* Cleanup IGameDef
* Move ITextureSource* IGameDef::getTextureSource() to Client only.
* Also move ITextureSource *IGameDef::tsrc() helper
* drop getShaderSource, getSceneManager, getSoundManager & getCamera abstract call
* drop unused emerge() call
* cleanup server unused functions (mentionned before)
* Drop one unused parameter from ContentFeatures::updateTextures
* move checkLocalPrivilege to Client
* Remove some unnecessary casts
* create_formspec_menu: remove IWritableTextureSource pointer, as client already knows it
* Fix some comments
* Change required IGameDef to Server/Client pointers
* Previous change that game.cpp sometimes calls functions with Client + InventoryManager + IGameDef in same functions but it's the same objects
* Remove duplicate Client pointer in GUIFormSpecMenu::GUIFormSpecMenu
* drop ClientMap::sectorWasDrawn which is unused
* Create UnitSAO, a common part between PlayerSAO & LuaEntitySAO
* Move breath to PlayerSAO & LocalPlayer
* Migrate m_yaw from (Remote)Player & LuaEntitySAO to UnitSAO
* Migrate m_yaw from Player to LocalPlayer for client
* Move some functions outside of player class to PlayerSAO/RemotePlayer or LocalPlayer depending on which class needs it
* Move pitch to LocalPlayer & PlayerSAO
* Move m_position from Player to LocalPlayer
* Move camera_barely_in_ceiling to LocalPlayer as it's used only there
* use PlayerSAO::m_base_position for Server side positions
* remove a unused variable
* ServerActiveObject::setPos now uses const ref
* use ServerEnv::loadPlayer unconditionnaly as it creates RemotePlayer only if it's not already loaded
* Move hp from Player to LocalPlayer
* Move m_hp from LuaEntitySAO to UnitSAO
* Use m_hp from PlayerSAO/UnitSAO instead of RemotePlayer
* remove IGameDef from Player class, only LocalPlayer has it now
* move many attributes/functions only used by LocalPlayer from Player to LocalPlayer
* move many attributes/functions only used by RemotePlayer from Player to RemotePlayer
* make some functions const
* hudGetHotbarSelectedImage now returns const ref
* RemotePlayer getHotbarSelectedImage now returns const ref
* various code style fixes
We introduce a new nodebox type "connected", and allow these nodes to
have optional nodeboxes that connect it to other connecting nodeboxes.
This is all done at scenedraw time in the client. The client will
inspect the surrounding nodes and if they are to be connected to,
it will draw the appropriate connecting nodeboxes to make those
connections.
In the node_box definition, we have to specify separate nodeboxes for
each valid connection. This allows us to make nodes that connect only
horizontally (the common case) by providing optional nodeboxes for +x,
-x, +z, -z directions. Or this allows us to make wires that can connect
up and down, by providing nodeboxes that connect it up and down (+y,
-y) as well.
The optional nodeboxes can be arrays. They are named "connect_top,
"connect_bottom", "connect_front", "connect_left", "connect_back" and
"connect_right". Here, "front" means the south facing side of the node
that has facedir = 0.
Additionally, a "fixed" nodebox list present will always be drawn,
so one can make a central post, for instance. This "fixed" nodebox
can be omitted, or it can be an array of nodeboxes.
Collision boxes are also updated in exactly the same fashion, which
allows you to walk over the upper extremities of the individual
node boxes, or stand really close to them. You can also walk up
node noxes that are small in height, all as expected, and unlike the
NDT_FENCELIKE nodes.
I've posted a screenshot demonstrating the flexibility at
http://i.imgur.com/zaJq8jo.png
In the screenshot, all connecting nodes are of this new subtype.
Transparent textures render incorrectly, Which I don't think is
related to this text, as other nodeboxes also have issues with this.
A protocol bump is performed in order to be able to send older clients
a nodeblock that is usable for them. In order to avoid abuse of users
we send older clients a "full-size" node, so that it's impossible for
them to try and walk through a fence or wall that's created in this
fashion. This was tested with a pre-bump client connected against a
server running the new protocol.
These nodes connect to other nodes, and you can select which ones
those are by specifying node names (or group names) in the
connects_to string array:
connects_to = { "group:fence", "default:wood" }
By default, nodes do not connect to anything, allowing you to create
nodes that always have to be paired in order to connect. lua_api.txt
is updated to reflect the extension to the node_box API.
Example lua code needed to generate these nodes can be found here:
https://gist.github.com/sofar/b381c8c192c8e53e6062
Move debug streams to log.cpp|h
Move GUI-related globals to clientlauncher
Move g_settings and g_settings_path to settings.cpp|h
Move g_menuclouds to clouds.cpp|h
Move g_profiler to profiler.cpp|h
