* Create UnitSAO, a common part between PlayerSAO & LuaEntitySAO
* Move breath to PlayerSAO & LocalPlayer
* Migrate m_yaw from (Remote)Player & LuaEntitySAO to UnitSAO
* Migrate m_yaw from Player to LocalPlayer for client
* Move some functions outside of player class to PlayerSAO/RemotePlayer or LocalPlayer depending on which class needs it
* Move pitch to LocalPlayer & PlayerSAO
* Move m_position from Player to LocalPlayer
* Move camera_barely_in_ceiling to LocalPlayer as it's used only there
* use PlayerSAO::m_base_position for Server side positions
* remove a unused variable
* ServerActiveObject::setPos now uses const ref
* use ServerEnv::loadPlayer unconditionnaly as it creates RemotePlayer only if it's not already loaded
* Move hp from Player to LocalPlayer
* Move m_hp from LuaEntitySAO to UnitSAO
* Use m_hp from PlayerSAO/UnitSAO instead of RemotePlayer
Modification of the emergeblocks internal state was not protected
by a lock, causing a race condition.
This can be reproduced by repeatedly running emergeblocks for an
already-generated section of the map (with multiple emerge threads).
* remove IGameDef from Player class, only LocalPlayer has it now
* move many attributes/functions only used by LocalPlayer from Player to LocalPlayer
* move many attributes/functions only used by RemotePlayer from Player to RemotePlayer
* make some functions const
* hudGetHotbarSelectedImage now returns const ref
* RemotePlayer getHotbarSelectedImage now returns const ref
* various code style fixes
* ClientEnvironment now uses UNORDERED MAP for active objects
* Use RemotePlayer and LocalPlayer everywhere it's possible
* Minor code style fixes
* Drop Client::getBreath() unused function
* Server/Client Environments now have an helper to cast Player object in the right type to use it
* Server: use RemotePlayer everywhere and remove previous added casts
* Client: use LocalPlayer where needed
* Environment: remove unused functions (getPlayers(), getRandomConnectedPlayer(), getNearestConnectedPlayer())
* LocalPlayer take ownership of maxHudId as it's the only caller
* RemotePlayer take ownership of day night ratio as it's the only user
* Pass getPlayerControl as const reference to prevent object copy on each call (perf improvement in ObjectRef::l_get_player_control call)
* getPlayerSAO is now only RemotePlayer call
* get/setHotbarItemCount is now RemotePlayer owned
* Server: Use RemotePlayer instead of Player object on concerned call to properly fix the object type
* PlayerSAO now uses RemotePlayer instead of Player because it's only server side
* ObjectRef::getplayer also returns RemotePlayer as it's linked with PlayerSAO
This is part 2 for 5f084cd98d7b3326b51320455364337539710efd
Other improvements:
* Use the defined ItemGroupList when used
* make Client::checkPrivilege const
* inline some trivial functions
* Add ActiveObjectMap typedef
* Add SettingsEntries typedef
Adds several new ways that the plantlike drawtype mesh can be changed.
This requires paramtype2 = "meshoptions" to be set in the node
definition. The drawtype for these nodes should be "plantlike".
These modifications are all done using param2. This field is now
a complex bitfield that allows some or more of the combinations to
be chosen, and the mesh draw code will choose the options based as
neeeded for each plantlike node.
bit layout:
bits 0, 1 and 2 (values 0x1 through 0x7) are for choosing the plant
mesh shape:
0 - ordinary plantlike plant ("x" shaped)
1 - ordinary plant, but rotated 45 degrees ("+" shaped)
2 - a plant with 3 faces ("*" shaped)
3 - a plant with 4 faces ("#" shaped)
4 - a plant with 4 faces ("#" shaped, leaning outwards)
5 through 7 are unused and reserved for future mesh shapes.
bit 3 (0x8) causes the plant to be randomly offset in the x,z
plane. The plant should fall within the 1x1x1 nodebox if regularly
sized.
bit 4 (0x10) causes the plant mesh to grow by sqrt(2), and will cause
the plant mesh to fill out 1x1x1, and appear slightly larger. Texture
makers will want to make their plant texture 23x16 pixels to have the
best visual fit in 1x1x1 size.
bit 5 (0x20) causes each face of the plant to have a slight negative
Y offset in position, descending up to 0.125 downwards into the node
below. Because this is per face, this causes the plant model to be
less symmetric.
bit 6 (0x40) through bit 7 (0x80) are unused and reserved for
future use.
!(https://youtu.be/qWuI664krsI)
previously function used tonumber which returned float
this caused errors in large numbers and resulted in
obj-def-handlers being invalid when retrived from lua tables in c
* Move included json code to jsoncpp subdirectory
This is needed to avoid having to specify the minetest src directory
as a system include when fixing the json includes.
* Fix json includes
They used "", so that the compiler searches the project's directory
first. The result was that when compiling with a system jsoncpp,
the project's own version of json.h was still included, instead of
the system version.
The includes now use <>, so a system location, or one specified with
'-Ilocation' is searched only.
* Fix for jsoncpp deprecated function warning
When compiling with a newer version of jsoncpp (and
ENABLE_SYSTEM_JSONCPP=true), jsoncpp emits a warning
about a deprecated function that minetest uses.
This fallback to std::map & std::set for older compilers
Use UNORDERED_SET as an example in decoration and ore biome sets
Use UNORDERED_MAP as an example in nameidmapping
l_request_insecure_environment didn't ignore all whitespace in the
secure.trusted_mods config option.
Replaces std::remove with std::remove_if and the isspace function.
This commit refactors the majority of the Mapgen settings system.
- MapgenParams is now owned by MapSettingsManager, itself a part of ServerMap,
instead of the EmergeManager.
- New Script API functions added:
core.get_mapgen_setting
core.get_mapgen_setting_noiseparams,
core.set_mapgen_setting, and
core.set_mapgen_setting_noiseparams.
- minetest.get/set_mapgen_params are deprecated by the above new functions.
- It is now possible to view and modify any arbitrary mapgen setting from a mod,
rather than the base MapgenParams structure.
- MapgenSpecificParams has been removed.
- Move mapgen creation logic out of EmergeManager and into Mapgen
- Internally represent mapgen type as an enum value, instead of a string
- Remove the need for a MapgenFactory per mapgen
Mgvalleys: Remove riverbed sand placement from base terrain generation
Riverbed material placement moved to MapgenBasic::generateBiomes()
Document fields and add note that the biome API is still unstable
Gives a convenient way to check a player's password.
This entirely bypasses the SRP protocol, so should be used
with great care.
This function is not intended to be used
in-game, but solely by external protocols, where no
authentication of the minetest engine is provided, and
also only for protocols, in which the user already gives the
server the plaintext password.
Examples for good use are the classical http form, or irc,
an example for a bad use is a password change dialog inside
formspec.
Users should be aware that they lose the advantages of the SRP
protocol if they enter their passwords for servers outside the
normal entry box, like in in-game formspec menus,
or through irc /msg s,
This patch also fixes an auth.h mistake which has mixed up the
order of params inside the decode_srp_verifier_and_salt function.
Zeno-: Added errorstream message for invalid format when I committed
Adds the particle option `collision_removal = bool`
Some particles are hard to use right now since they either go through
solid blocks (without collision detection), and with collision
detection enabled they (e.g. raindrops) would just stop dead on the
floor and sit there until they expire, or worse, scrape along a wall
or ceiling.
We can solve the problem by adding a boolean flag that tells the
particle to be removed if it ever collides with something. This will
make it easier to add rain that doesn't fall through your roof or stick
on the top of it. Or clouds and smoke that don't go through trees.
Particles that collide with this flag are marked expired
unconditionally, causing them to be treated like normal expired
particles and cleaned up normally.
Documentation is adjusted accordingly.
An added bonus of this patch is that particles can potentially collide
many times with nodes, and this reduces the amount of collisions to 1
(max), which may end up reducing particle load on the client.
BiomeGen defines an interface that, given a set of BiomeParams, computes biomes
for a given area using the algorithm implemented by that specific BiomeGen.
This abstracts away the old system where each mapgen supplied the noises
required for biome generation.
* Fix naming style for methods and classes:
Use camelCase for methods and PascalCase for classes as
code style demands it. And use sneak_case for methods that
are not member of a class.
* Replace "* " with " *" for Pointers
* Same for references
* Put function body opening braces on new line
* Other misc minor non functional style improvements
The legacy init packet (pre v25) sends information about the client's
password that a server could use to log in to other servers if the
username and password are the same. All the other benefits of SRP of
protocol v25 are missed if the legacy init packet is still sent during
connection creation.
This patch adds an option to not send the v25 init packet. Not sending
the v25 packet means breaking compat with pre v25 servers, but as the
option is not enabled by default, no servers are affected unless the
user explicitly flips the switch. More than 90% of the servers on the
serverlist support post v25 protocols.
The patch also fixes a bug with greying out of non compliant servers
being done wrongly, the min and max params were mixed.
* No function overloading
* Adhere coding style and with method names following
lowercase_underscore_style
* Use std::string in external API, handling these is
much more fun
NDT_CONNECTED attempts to connect to any side of nodes that it can
connect to, which is troublesome for FACEDIR type nodes that generally
may only have one usable face, and can be rotated.
We introduce a node parameter `connect_sides` that is valid for
any node type. If specified, it lists faces of the node (in "top",
"bottom", "front", "left", "back", "right", form, as array) that
connecting nodeboxes can connect to. "front" corresponds to the south
facing side of a node with facedir = 0.
If the node is rotatable using *simple* FACEDIR, then the attached
face is properly rotated before checking. This allows e.g. a chest
to be attached to only from the rear side.
We introduce a new nodebox type "connected", and allow these nodes to
have optional nodeboxes that connect it to other connecting nodeboxes.
This is all done at scenedraw time in the client. The client will
inspect the surrounding nodes and if they are to be connected to,
it will draw the appropriate connecting nodeboxes to make those
connections.
In the node_box definition, we have to specify separate nodeboxes for
each valid connection. This allows us to make nodes that connect only
horizontally (the common case) by providing optional nodeboxes for +x,
-x, +z, -z directions. Or this allows us to make wires that can connect
up and down, by providing nodeboxes that connect it up and down (+y,
-y) as well.
The optional nodeboxes can be arrays. They are named "connect_top,
"connect_bottom", "connect_front", "connect_left", "connect_back" and
"connect_right". Here, "front" means the south facing side of the node
that has facedir = 0.
Additionally, a "fixed" nodebox list present will always be drawn,
so one can make a central post, for instance. This "fixed" nodebox
can be omitted, or it can be an array of nodeboxes.
Collision boxes are also updated in exactly the same fashion, which
allows you to walk over the upper extremities of the individual
node boxes, or stand really close to them. You can also walk up
node noxes that are small in height, all as expected, and unlike the
NDT_FENCELIKE nodes.
I've posted a screenshot demonstrating the flexibility at
http://i.imgur.com/zaJq8jo.png
In the screenshot, all connecting nodes are of this new subtype.
Transparent textures render incorrectly, Which I don't think is
related to this text, as other nodeboxes also have issues with this.
A protocol bump is performed in order to be able to send older clients
a nodeblock that is usable for them. In order to avoid abuse of users
we send older clients a "full-size" node, so that it's impossible for
them to try and walk through a fence or wall that's created in this
fashion. This was tested with a pre-bump client connected against a
server running the new protocol.
These nodes connect to other nodes, and you can select which ones
those are by specifying node names (or group names) in the
connects_to string array:
connects_to = { "group:fence", "default:wood" }
By default, nodes do not connect to anything, allowing you to create
nodes that always have to be paired in order to connect. lua_api.txt
is updated to reflect the extension to the node_box API.
Example lua code needed to generate these nodes can be found here:
https://gist.github.com/sofar/b381c8c192c8e53e6062
I've written several experimental bits of code that revolve around the
need for a consistent calendar, but implementing one is extremely hard
in mods due to time changes and mods overriding core.get_timeofday(),
which will conflict.
The second part of the problem is that doing this from a mod requires
constant maintenance of a settings file.
An implementation in core is trivial, however, and solves all of
these problems at virtually no cost: No extra branches in server
steps, and a single branch when minetest.set_time_of_day(), which is
entirely reasonable.
We store the day_count value in env_meta.txt.
The use case is obvious: This change allows mods to create an actual
virtual calendar, or properly account for seasonal changes, etc..
We add a "/days" chatcommand that displays the current day count. No
permissions are needed. It can only retrieve the day count, not
modify it.
