ABM's are hardcoded to run every 1.0s, NodeTimers are hard coded to
run at every 1.0s. Block mgmt is running every 2.0sec.
However, these timers can be better tuned for both higher and lower
values by server owners. Some server owners want to, and have the
resources to send more packets per second to clients, and so they
may wish to send smaller updates sooner. Right now all ABM's are
coalesced into 1.0 second intervals, resulting in large send queues
to all clients. By reducing the amount of possible timers, one can
get a far better response rate and lower the perception of lag.
On the other side of the camp, some servers may want to increase
these values, which again isn't easily doable.
The global settings abm_interval and nodetimer_interval are set to
current values by default. I've tested with 0.2/0.5 type values
and noticed a greatly improved response and better scattering of
nodetimers, as well as enjoying not faceplanting into doors with
pressure plates anymore.
The legacy init packet (pre v25) sends information about the client's
password that a server could use to log in to other servers if the
username and password are the same. All the other benefits of SRP of
protocol v25 are missed if the legacy init packet is still sent during
connection creation.
This patch adds an option to not send the v25 init packet. Not sending
the v25 packet means breaking compat with pre v25 servers, but as the
option is not enabled by default, no servers are affected unless the
user explicitly flips the switch. More than 90% of the servers on the
serverlist support post v25 protocols.
The patch also fixes a bug with greying out of non compliant servers
being done wrongly, the min and max params were mixed.
This allows mods to perform both asynchronous and synchronous HTTP
requests. Mods are only granted access to HTTP APIs if either mod
security is disabled or if they are whitelisted in any of the
the secure.http_mods and secure.trusted_mods settings.
Adds httpfetch_caller_alloc_secure to generate random, non-predictable
caller IDs so that lua mods cannot spy on each others HTTP queries.
To avoid spawn search failing in new specialised mapgens
Increase spawn search range to 4000 nodes
Add getSpawnLevelAtPoint() functions to EmergeManager, class Mapgen
and all mapgens
Remove getGroundLevelAtPoint() functions from all mapgens except mgv6
(possibly to be re-added later in the correct form to return actual
ground level)
Make mgvalleys flag names consistent with other mapgens
Remove now unused 'vertical spawn range' setting
Flag is set by default in MapgenParams
The global 'trees' flag remains but is now
undocumented and unset by default in MapgenParams
Add mgv6_spflag 'trees' set by default in
defaultsettings.cpp to affect new worlds only
This is automatically backwards
compatible for existing worlds
Increase default from 6 to 16 to help with mgv7 and mgfractal
Large-scale or alternative mapgens can result in a lowland spawn point not
being found, causing a spawn at (0, 0, 0) possibly buried underground
The max height is now settable to allow correct player spawn
in any mapgen or when using custom noise parameters
- Add warning log level
- Change debug_log_level setting to enumeration string
- Map Irrlicht log events to MT log events
- Encapsulate log_* functions and global variables into a class, Logger
- Unify dstream with standard logging mechanism
- Unify core.debug() with standard core.log() script API
Preserves the rare unbroken protruding dungeons
Fix random range for first room roomplace
Fix checked volume for first room 'fits' bool
and check for 'untouchable' flag instead of 'inside'
Remove 'enable floating dungeons' setting
* Combine client and server man pages.
* Update unit test options and available databases in man page.
* Add `--worldname` to man page.
* Fix a bunch of places where `"Minetest"` was used directly instead of `PROJECT_NAME`.
* Disable server build by default on all operating systems.
* Make `ENABLE_FREETYPE` not fail if FreeType isn't found.
* Enable LevelDB, Redis, and FreeType detection by default.
* Remove the `VERSION_PATCH_ORIG` hack.
* Add option to search for and use system JSONCPP.
* Remove broken LuaJIT version detection.
* Rename `DISABLE_LUAJIT` to `ENABLE_LUAJIT`.
* Rename `minetest_*` variables in `version.{h,cpp}` to `g_*`.
* Clean up style of CMake files.
This feature is still experimental and has some issues. Also,
increase texture_min_size to 64 px. The setting was initially
a conservative 16 so that the effect would not be noticable
for players who aren't using aniso/bi/trilinear filtering. This
isn't necessary now that texture_clean_transparent is disabled
by default.
If liquid_queue_purge_time == 0 then disable the queue size limiting and make this the default setting
Additionally, liquid_loop_max now defaults to 100000
Since minetest has no mobs within the core anymore, I suppose these
settings and code should go. Any mod that uses `minetest.setting_getbool`
will work with no problem since the default return value is `false`.
There have been plenty of ppl involved in creating this version.
I don't wanna mention names as I'm sure I'd forget someone so I
just tell where help has been done:
- The partial android versions done by various ppl
- Testing on different android devices
- reviewing code (especially the in core changes)
- testing controls
- reviewing texts
A big thank you to everyone helping this to be completed!
MapgenParams is no longer a polymorphic class, eliminating the need for messy and bug-prone reallocations.
Separation between the common and mapgen-specific parameters is now strongly defined.
Mapgen parameters objects are now properly encapsulated within the proper subsystems.
The commit didn't work because the blocks weren't loaded yet.
This reverts commit 22dbbf0a6fc9547f0dbdb7f6076337b8c6acd48b.
Conflicts:
minetest.conf.example
Move most of the media-related code in client.cpp into a new class
ClientMediaDownloader (clientmedia.cpp, clientmedia.h). Among other
things, this class does the following things:
- Download [remote_server][sha1] instead of [remote_server][name]. This
is to support servers that provide the same file name with different
contents.
- Initially fetch [remote_server]index.mth. This file should follow the
Minetest Hashset format (currently version 1) and contain a list of SHA1
hashes that exist on the server.
- The list of needed SHA1s is uploaded (via HTTP POST) when index.mth is
requested, so servers can optionally narrow down the list to the needs
of the client.
- If index.mth is missing (HTTP response code 404), we enter compat mode,
fetching [remote_server][name] as before this commit.
- remote_server can now contain multiple servers, separated by commas.
The downloader code attempts to split requests between the different
servers, as permitted by each server's index.mth. If one server claims
to have a file but actually doesn't (or something fails), we ask a
different server that also claims to have it.
- As before, when none of the remote servers provide a particular
file, we download it via the conventional method, i.e. using
the minetest protocol: TOSERVER_REQUEST_MEDIA / TOCLIENT_MEDIA.
- Bugfix: Every downloaded file's SHA1 is now verified against the SHA1
announced by the minetest server (before loading it and inserting it
into the file cache).
- Bugfix: Only send TOSERVER_RECEIVED_MEDIA when we actually have all
media. This should fix#863.
Add curl_parallel_limit setting that will replace media_fetch_threads in
a later commit.
Fix a typo in MutexedQueue::pop_back() that made it impossible to compile
code that used this function. (Noticed this while implementing httpfetch.)
Two new configuration options are added:
- "enable_ipv6" to enable/disable the overall use of IPv6
- "ipv6_server" to enable/disable the use of IPv6 sockets when running
a server (when "enable_ipv6" is enabled)
If USE_CURL is set, it also downloads a list from a remote server.
The url of this list is configurable in minetest.conf using the setting "serverlist_url"
The local list of favorite servers is saved in client/serverlist/filename
filename is also configureable using the setting "serverlist_file"
