Some people borrowed the creative code for their sub-games with an exclusive attribution to celeron55.
This is frustrating since I've largely rewritten, redesigned and carefully maintained this mod for the last months.
I expect to be credited.
Currently any doors viewed from underwater will disappear but removing the line 'use_texture_alpha = true,' seems to fix this. Thanks to Thomas-S for finding this glitch.
The boat model had over 1700 tris (!) before this redo. I've reduced
the amount of tris to ~150, which is very reasonable given that there
are almost 45 faces to this model.
I've also spent a good hour re-UV unwrapping the entire model which
has a huuuge impact on the boats' appearance. As much as possible,
the boat now looks like it's made out of actual blocks of wood,
and I've even attempted to make the grains connect around edges,
appear in the same pattern and spacing, and generally make it look
like it's just a nice crafted thing out of several pieces of wood.
I've had to tweak the rudder part to make the texture actually have
square texture pixels. I did that by varying the vertical position of
the botton of the rudder handle and the top of the rudder bottom, which
worked well. I also had to 'slice' the rear face of the boat to prevent
a strange texture tear, probably due to non-flat surface somewhere,
but I couldn't spot the issue there anymore after adding 2 extra edges.
This looks totally like a new boat now.
- http://i.imgur.com/stiVzsa.jpg
If LVM or some other nonmetadata method is used to place a door,
then metadata is missing that tells us whether the door is left
or right-hinged.
However, we can detect that nodemeta is missing and see if the node
name is _a or _b. In the case of _a, nothing needs to be done and we
can just open the door. In the case of _b we assume the door is right
hinged, and tune the state nodemeta value so that the door opens the
right way. This all of course assumes that the schematic method places
the doors *closed* by default, which is reasonable.
- disallow placing beds in protected areas
- fix rotation of beds(broken after 41c2b2ae)
- allow using others' beds, but don't change spawn location
Fixes#953. #943 isn't something I think was ever implemented, and
this does a fair job of addressing the main concern (spawning in
others' houses)
We were cleverly attempting to use an airlike node as the
top half of the doors, but as airlike nodes are not walkable,
falling nodes would not stop falling and thus remain an entity
stuck on top of a door.
After inspecting the builtin/game/falling.lua code, I considered
the remaining options: (a) revert doors such that the top part is
actually the door, (b) play with nodedef fields and see if other
flags may work, or (c) modify the hidden door part to another
drawtype that properly prevents this issue.
(a) seemed way over the top for now, although it would solve the
issue, it would cause a rewrite of most of the code including the
old-door-conversion.
(b) turned up nothing.
(c) turned out to be relatively simple.
So, here's the implementation where I turn the hidden door top
into a tiny, non-targetable but walkable nodebox that is entirely
inside the door hinge. It's entirely transparent, so you still
can't see it, can't hit it, nor can you place anything in it or
make liquids flow through it. The top part is placed in the right
position on placement and not touched further.
Falling nodes will properly stop on top of these doors. I've
adjusted the door conversion code to properly account for the
issue as well, so the only thing remaining is people who have
been running a git branch - those can upgrade by re-placing the
door.
the ```group:cracky``` group contains all sorts of odds and ends
nodes that we shouldn't connect to. There are a few nodes that
walls now no longer connect to, that probably should get
```group:stone``` added, or something similar, though.
I've created a modified B3Dexport.py version that automatically strips
the embedded texture link to external texture files. These links were
causing the engine to spew "can't find character.png" messages on the
console, but were harmless due to texture loading being done by the
client side and not through irrlicht.
I previously moved character.png to /textures/, which is wrong. I now
understand that character.png was in the same folder as character.blend
simply to make blender load the texture from the embedded linkage
automatically. Nothing more, nothing less.
Subsequently the character.png file should just sit in convenience
in the /models/ folder with the blend file, and not in the textures
file. This patch moves it back. And yes, minetest does load the
character.png from this path.
Tested with nodebreaker, fire.
If called from lua, minetest.remove_node() calls on_destruct() callbacks
before the map is actually updated. This means that we can't look at the
map data to determine if we're done cleaning up adjacent nodes, and we
have to stop recursing some other way.
There's no data we can pass around through functions that would survive
scope to a secondary on_destruct() callback, so we have to maintain
local state somewhere in the mod namespace.
In this case, we keep a bitflag. The bitflag is set to "true" by
default. On the first half removal, the flag is flipped and afterwards
we remove the other half node. When the on_destruct for the other half
is running, it's value is false and we flip it back to true without
removing the other half node.
This thus prevents recursing.
To facilitate easier finding of the bed partner, we tell our on_destruct
whether we're a top or bottom half node through a passed flag.
Now that the top is diggable, we just need to assure that it drops a
bottom bed part.
I've found a favorable steel door sound from a parking garage
door that isn't abrupt or scary, just sounds like a nice solid
metal door. The sample had both opening and closing sounds, and
so they match nicely. Amplified and mixed several samples together
to reduce ambient noise, and get the right level compared to
wood doors. Attribution was added as well. CC-BY-3.0 sounds.
We raise the height of the fencegate node by 0.0001 to make the
fencegate post stop fighting with node blocks. This makes the
gate pole appear to be cut through the node, and doesn't leave
a gap when stacking fencegates, which would look odd.
Fixes#909. Door tops are never flammable.
This doesn't guard yet against a voxelmanip removing the top node,
but that is less of an issue since if a voxelmanip removes the top,
then the bottom part remains functional and visibly intact. If the
voxelmanip removes the bottom part, but not the top, then this patch
makes it clean up the top just fine.
The access privilege allows players that have it to bypass protection
on locked doors/trapdoors, chests and bones.
The priv also allows bypassing any minetest.is_protected() check,
including digging nodes and placing them. It is meant for world
moderators to clean up and fix map issues.
Original patch by red-001. Split up and rebased/rewritten by sofar.
This patch requires https://github.com/minetest/minetest/pull/3800
These basic connected wall nodes automatically connect
to neigboring stone blocks, other wall blocks and anything
that's "cracky". The do not connect to wood (fences will do
that).
The walls are generated using a new walls.register() API.
Documentation on the API is included in game_api.txt.
This change requires minetest/minetest#3503.
Walls are added for all cobble stone materials. They generally
look best and are the natural use cases for these materials.
This fence gate builds on NDT_CONNECTED by assuming fence nodes will
automatically connect to it's sides properly. The fence gate will
open and close just like doors, with sounds, but it only opens one
way. The gate sticks out quite a bit and can be bumped into, so the
fence may be used as some sort of path switch.
The fence gate offers no form of protection and can be opened and
closed by anyone. This is done on purpose - the fencegate isn't
meant to provide protection from players, as fences can be
trivially jumped over. Instead, these fences should be used for
protecting crops from hungry sheep, or keeping rabbits in their
pen, or just decoration. Mods can also modify the mod to add
protection, of course.
A recipe is added to make these. It's 4 sticks and 2 wood (any)
as follows:
stick wood stick
stick wood stick
The collision box of the open gate is such that if two gates are
connected but mirrored (making an M shape) then you can walk a large
entity that's larger than 1.0 wide through the opening. The gate of
an opened fence can also be stood upon or bumped into.
I've mixed together some sounds to provide a somewhat light sound
experience, one that one would expect from a small gate latching open
and close.
This change requires #873, otherwise it doesn't connect to fences.
This changes the drawtype of fences to NDT_CONNECTED nodebox drawtype.
These nodes are drawn by the client with the needed connections on
the fly as the scene is drawn. There is no logic needed by mods to
modify the nodes.
These fences connect to (1) other fences, (2) planks and (3) tree
trunks, but nothing else. They do not connect to stone, dirt, wool,
etc. This is done by the "connects_to" parameter, which takes groups
and node names.
Due to the way textures are wrapped, we can make these nodes look a
lot better by giving them a special tile.
This change requires minetest/minetest#3503.
Books still don't wrap long lines of text properly so until this has been sorted out I suggest reverting back to a previous working formspec which lets players read books properly until a fix is found (and maybe scrollbars added to texarea's). Also adding a recipe to blank written books.
This is an adapted version of #861 - by oleastre
Most mods had been calling `doors.register_door() with a door
name that included the "modname:" prefix, and we should continue
to allow mods to do so, without registering the nodenames created
in the "doors:" namespace.
The default case is to use the "modname:" prefix verbatim. If
mods or code calls this function without a prefix, then "doors:"
is automatically used.
Now that the namespace is corrected, the copy replacement ABM is
no longer needed.
This function maps doors.register_door to the new API as far as
reasonable. We can't map the texture, so we fall back to a default
texture. An error message is printed if mod writers did not provide the
needed new tiles field for the door. The created doors are functional
and a full replacement. Old doors are replaced with the new ones
through an ABM.
These sounds were perceived to be too loud in the
game. I've lowered them significantly but they remain
plenty audible. The dig sounds were very loud as well
so I toned them down as well.
Other mods may depend on knowing whether doors are placed
to setup additional attributes or perform node manipulations.
This is something e.g. mesecons does to connect circuits
to doors. This was tested with mesecons. Placing a door next
to a mesecon wire will make the wire automatically
connect, which was otherwise not happening.
And similarly, if we wield a door and right click any node
that has an on_rightclick() handler, call the handler
instead.
Just to be on the safe side, assure that none of this
code runs when right-clicking an entity or player, which
would likely crash the server.
Fold in PR #831 as well - prevent server crash on door
place on unknown blocks, by @tenplus1.
This code never allowed placing a door on e.g. a grass
plant. The code to handle this isn't that complex. With
this code, doors can be placed on flowers and on normal
node surfaces without issues.
Issue #811 - new gravel texture needed.
This texture was Gambits' PixelBOX gravel light texture. Gambit
posted that his texture pack is WTFPL:
- https://forum.minetest.net/viewtopic.php?f=4&t=4990&start=50#p141196
I've made significant modifications to this texture:
- slightly rotated and rolled some sections of pixels
- minor burn/dodge some pixels to keep high contrast
- removed lineair repeating effects
- etc.
Attribution is added back to Gambit. Thanks.
Both the standing and sitting animations had misplaced curve
cusps that caused the end part of the animation to wiggle the
feet slightly back and forward.
I've fixed both animations parts and re-exported. Verified in-game
with multiplayer that everything was indeed fixed.
By adding the timer to the tnt:tnt_burning node it will help mods add the block and cause an explosion after 4 seconds instead of doing nothing like in it's current state.
Spread ABM intervals evenly across 1 to 16 seconds
16s ensures no nodes are missed when player walks past
Adjust chance values to compensate, for identical action rates
Combine lavacooling ABMs into one, return to chance = 1
Grass growth: add 'neighbors = "air"' to avoid
processing the thousands of underground dirt nodes
Grass death: Reduce action rate to that of grass growth
Fire: Use chance = 1 for flame extinguishing
and flame removal when mod is disabled
Node timers are higher precision and a better guarantee
of happening at regular intervals, whereas ABM's may be
postponed, cancelled or missed if a player is too far.
The largest benefit is that once the furnace is done
cooking, no more ABM's are fired - the timer is stopped
instead and no more events are created until items
are put in the furnace.
This patch is larger due to the migration of the timer
function and indentation change as a result of the somewhat
reduced complexity. I've tested with several furnaces and
this works correctly and behavior is not affected, although
people may find that their furnaces now work more
regularly.
If you place several furnaces next to eachother, you will
still find all furnace timers firing exactly at the same
time. This is a bug in core that should not coalesce node
timers at second intervals.
This patch replaces the default door nodes with a new mesh model
and nodes.
Two new models were added that are 2 blocks high. One for left-hinge
and one for right-hinge doors. This allows us to make a single texture
fit on both models. The alternative would have been 1 model and 2
unmapped textures, which is more work for mod developers.
Doors work exactly like the old doors, including ownership, breaking
doors, opening and closing.
Under the hood, we can prevent the top part of the door from being
obstructed by placing an invisible node. This prevents liquids from
flowing through doors or people placing sand or other blocks in the
top half. The door code automatically places and removes these as
needed.
Metadata is used to store door state, just like the old version.
A doors API is added, it allows mods to use the API to open/close or
toggle door states without worrying about sounds, permissions and
other details. This is intended for e.g. mesecons. This API allows
mods to manipulate or inspect doors for players or for themselves.
In-game old door nodes are automatically converted using an ABM and
preserve ownership and orientation and state.
TNT blows up all doors and trapdoors except for the steel ones,
who can survive a blast. We return an itemstack in on_blast(),
which requires a TNT API patch which is also pending.
We enable backface culling for most of these doors, as this gives
the identical visual appearance that the old doors had. In the case
of the glass door, there's a slight twist.
The texture files used by the new doors have new names that do
not conflict with previous texture file names to avoid texture
pack conflicts.
Thanks to red-001 <red-001@users.noreply.github.com> for some
of the conversion code, cleanups, and extra textures.
This converts the call to minetest.register() for the default
fence node, so it can be called by other mods to quickly
setup other fences.
Since this creates an API, insert it into the game_api.txt.
The api looks like minetest.register(name, {def}), and has two
uncommon fields: "texture" and "material". Any normal nodedef
property can be passed through, except "drawtype". The "fence"
group will always be added.
The default fence recipe is modified to be as follows:
wood, stick, wood
wood, stick, wood
This recipe yields 4 fence nodes.
This allows us to create according recipes for acacia, pine,
aspen, and junglewood fences without adding new stick types:
pine wood, stick, pine wood
pine wood, stick, pine wood
This is a from-scratch implementation, written by heart but inspired
by (#665 - Add many wooden fences).
Stick and fences nodes are named in a consistent way.
Organizing these in groups will allow mods to do several things
easier:
- create craft recipes using them as ingredients
- manipulate map nodes based on group properties
There are quite a few slab and stair blocks already, so automatically
add these groups at registration time for all of those. Since most
mods I've seen use the registration code in this submod, they will
also benefit.
We're using a normal wooden side texture to draw the sides
of trapdoors. But the side textures have only 2 edges that
have a nice texture for the 2px wide trapdoor. We can
either repaint the textures, or just rotate the texture
properly for the two sides that need it.
Because the side texture for wooden doors was just a default:wood
texture, it clashes with the colors in the trapdoor, and so
we add a wooden trapdoor-matching tile side texture as well.
This also improves the steel trapdoor side, but without a
texture change there since that was already a specially
drawn texture for that node.
We also increase the thickness of the trapdoor to 2px. Right
now the model is 0.4 large, but this causes the side textures
to look odd as there's a mismatch in pixel size. By scaling the
trapdoor side up to exactly 2px, the sides look natural.
Thanks to @kilbith for the suggestion.
There really is no reason to prevent rotation in trapdoors, I
expect this to be an oversight.
Trapdoors work perfectly well sideways, upside down and can
work like fences, gates and more. Most commonly, people will
want to put them in the top half of the node so they remain
flush with a floor.
Adds a birch-like tree to the default_game. Aspen was chosen on
purpose instead of birch, as several birch tree mods already exist
and choosing a different name avoids any conflicts.
Schematics were made for both normal and sapling version, assuring
saplings will not be able to grief. The shape of the Aspen is "fanning
out at the top" and provides an easy tree to walk under, but still a
somewhat thick cover. The Aspen trunk is 4 to 6 blocks tall, with up
to three layers of leaves on top, making it slightly taller than an
Apple tree, but shorter than a Pine tree, which provides a good blend.
Textures were painted from scratch, except tree_top and _wood
variants, which are color modified versions of the pine_wood
variants. Appropriate licenses have been chosen for the new textures.
The leaf texture is light enough to contrast other trees, but dark
enough to offset against our light default grass color. The leaves
are drawn in the typical minetest default fashion with plenty of
transparancy, but enough definition to suggest that you're seeing
something that looks like leaves. The placement of leaves in the
schematic also suggests the top of the tree is sparse and you can
see the sky through the leaves.
Sapling texture is both traditional and different, with lush green
leaves and a well-defined stem, but slightly stick-like and skinny,
as these plants tend to grow up first, then out.
Add fallen Aspen logs. We make these logs a minimum of 2 blocks long,
and up to 3. This allows us to make these logs a place where both
red and brown mushrooms can be found, to these may be attractive to
players. However, the spawn rate for these has been reduced a lot
compared to the other logs, to account for the scarcity of Aspen.
Add stairs, slabs for these wood types as well.
Mapgen will place these trees in deciduous forests only, but in
a way that the biome is a range between entirely Apple trees, and
mostly entirely Aspen trees, with a bias to Apple trees. To make
fallen logs somewhat correlated with trees, we modify the planting
of Apple trees and logs to use perlin noise and not fill ratio,
otherwise you'd always end up with Apple logs in Aspen tree areas,
which would be suspicious. There still is a bit of a mix.
In oversight, I added this recipe not verifying that it was already
taken.
We change this to a 2x2 iron bar recipe. The shape and amount are
reasonable (reduced to output 1 steel trapdoor), and I verified that
it wasn't in use.
Fixes#779
We can vary the landscape a bit more by placing "fallen logs"
around the various forests. These decorations are quite fast
and will provide some gameplay value but are still more rare
than the corresponding trees, so they don't provide free
materials.
I've manually put the schematic as lua tables since these log
schematics are only 8 blocks. We vary the log lengths between
1 and 3 blocks by making the end blocks have a lower chance
of appearing.
Amount is varied by fill_ratio, except for acacia trees where
we reduce the scale, so that acacia logs show up near places with
acacia trees consistently.
Mushrooms are placed optionally on each log. We can't place
two different mushrooms on a log, so instead we opt to place
brown mushrooms on oak/appletree logs, brown mushrooms on
jungletree logs, and red mushrooms on pine logs. No mushrooms
are placed on acacia logs, as they occur in a dry biome,
savannah, and this adds a bit of biome diversity.
Combine any written book with an empty book to copy it. The
copy is in player hands when using, and the original is put
back on the crafting grid and can be directly copied again.
All ownership and metadata is retained, so the copy of the book
is as writable as the original is, or isn't.
Adds a steel trapdoor. Textures were painted from scratch, and
inspired by the current Steel Door. Ownership on the trapdoor
works as expected, and so does the crafting recipe.
Playing stereo sounds positionally in OpenAL causes it to play
the sounds unattenuated - same volume for all distances. This
shouldn't happen, and makes door sounds unneccesarily loud from
very far away.
Convert all door samples to mono, 22kHz 64kbit.
Trimmed all door samples to remove lead, trail silence.
These have almost no value gameplay wise. Mushrooms spread
by their very nature into appropriate soil nearby, and
harvesting spores is something only scientists do. Actual
mushroom farmers leave a few mushrooms and put on more
manure, and keep the light off.
Modify the growth ABM to test for light levels and attempt
to plant a similar mushroom nearby (+/- 2 x,z, +/- y). Light
at both source and destination needs to be low enough. I've
tuned it to be 3-4 spaces from a torch.
Mushrooms will die in full sunlight, but they can survive under
trees and may grow out at night anywhere.
Removed obsolete textures.
Remove unused nodes and provide aliases for them.
Aliased obsolete nodes so no unknown item nodes appear.
Mushrooms die only in full sunlight (light level 15).
This prevents nodes that are not of the "facedir" paramtype2,
as these are generally not expected to be able to rotate. Mods
and other methods may still manipulate param2 of these nodes
as expected.
Addresses #712
Since written books are quite different from empty books, the
visual clue that they are different items is really needed in-game.
I've added a "clasp" or "belt-with-buckle" like element to the
png from default_book, keeping them very similar but also
immediately recgnizably different.
I added the new texture to blockmen's license list since it's
obviously derivative of his work.
The PNG was run through a minimizer/optimizer to save space.
The fixing of low density decorations allows returning to
sidelen 16 for acacia trees and cacti, previously sidelen
80 was required for low density decorations to appear
Also use sidelen 16 instead of 8 for mgv6 papyrus
Bring humidity points closer to reduce distortion of voronoi cells
Slightly reduce size of hot and frozen biomes
Improve location of glacier biomes
Remove unnecessary snow nodeboxes from tundra to improve FPS
Add missing dirt_with_snow to taiga
Dirt waters are more suitable for waterlilies
Add dedicated dunes biome in coniferous forest
Papyrus: use dirt base again
Force-place roots on mapgen tree schematics
Tune some humidity points to improve voronoi cells
Add random rotation to jungle trees
Rename in game.conf and documentation
Update game_api.txt documentation for bucket API and tree functions
Fix tab, space and comment formatting in game_api.txt
Rename in mod READMEs
- beds/Changelog.txt probably won't be updated because http://dev.minetest.net/Changelog is used instead
- The information in farming/API.txt is already documented in game_api.txt
Add extinguish sounds (from default mod lavacooling)
'disable fire' setting extinguishes fire quickly using a dedicated ABM
'disable fire' also disables all other ABMs
Simplify flammable node removal ABM
Speed up node ignition, it was too slow
Add 'sunlight propagates = true' and 'paramtype = "light" to flame
Balance fire sounds' gain
More complex distribution of dry grasses
Remove water below glacier rivers
Gravel as glacier seabed
Do not force-place acacia root
Tune acacia tree density
Match mgv5/v7 mushrooms to tree density
Spawn mgv6 mushrooms by trees
* Move furnace related code into furnace.lua
* Move duplicated code into functions
* Rewrite ABM:
* Easier to follow strcuture (no returns in the middle)
* No unnecessary calls to get_craft_result
* Split logic and "visual feedback" (a bit)
* Fewer calls to meta:set and meta:get
* Better feedback on the current state of the furnace
Mirror the setup of a door placed next to any door, not just next to
a door of the same type. This is particularly useful where there are
multiple door types that have the same appearance, but one wants the
doors of a pair to have different behaviour in some other respect.
When a trapdoor is mounted upside down, to make its top surface flush
with the floor above when closed, it is necessary to have some way to
climb through the trapdoor node when it's open. Making it climbable
like a ladder satisfies this need. It is somewhat realistic, as a real
trapdoor can have a ladder segment mounted on one face. When the trapdoor
is mounted in its default orientation, making the bottom surface flush
with the ceiling below when closed, the climbability when open is not
strictly necessary, but is still a convenience.
The message to "hold shift" makes an unwarranted assumption about the
user's keybindings. Messages from the server should refer to a key's
game function, rather than its extragame identity.
Cotton plants used to drop strings, now they drop farming:cotton. Some mods (namely, throwing) still use farming:string, therefore we need farming:string to be equal farming:cotton.
- API {farming.register_hoe(), farming.register_plant()}
- Fertilities -> Plant only grow on soil with a fitting fertility, e.g. Wheat only grows on grassland, while cotton grows in deserts and grassland)
- New soil: Desert Sand
- Place seeds instead of plants
These changes allow players to punch up old bones or their own.
If there is no area for bones, drop the items instead of delete.
Notify the player where he died, so he can find them again.
Also, move "waving = 1" property for grasses/shrubs over to default/nodes.lua
and put all instances of this property right under the drawtype, since they
are directly related and depend on the above.
hat layer, when the area for the cape (a 8x12 set of pixels) which is to
the right of the arm texture, is given a non-alpha or semi-alpha pixel,
it will display ingame, similar to the hat layer on the player's head.
