Move star draw to before sun glow texture draw and before sun draw,
not currently essential but the logical order. Will be necessary if
a 'no far ground' option is added, to draw stars behind the sun.
```
[ 10%] Building CXX object src/CMakeFiles/minetest.dir/client/render/interlaced.cpp.o
cc1plus: warning: -Wabi won't warn about anything [-Wabi]
cc1plus: note: -Wabi warns about differences from the most up-to-date ABI, which is also used by default
cc1plus: note: use e.g. -Wabi=11 to warn about changes from GCC 7
```
Reported by GCC
```
minetest/src/server.cpp:996:42: warning: ‘peer_id’ may be used uninitialized in this function [-Wmaybe-uninitialized]
errorstream << "ProcessData: peer=" << peer_id << e.what() << std::endl;
```
At sunset:
Stars first appear slightly later, at the time the sun disappears over the horizon,
this fixes seeing dark stars in front of the sun horizon glow texture.
Stars reach full brightness slightly earlier at time 20000, not so excessively long
after sunset.
The above behaviour is also applied at sunrise, but of course, time-inverted.
In pitch fly mode, you fly to the exact direction you are pointing at, using the forward key. Other move directions are also pitched accordingly.
It allows smoother and more complex movements.
Can be enabled/disabled by L key by default (set keymap_pitchfly in minetest.conf)
script_get_backtrace() was leaving its return value on the stack, corrupting
subsequent lua operations for functions that did not immediately return.
This problem can specifically be observed in the case of multiple "groupcaps"
entries, each of which provides the legacy "maxwear" property. These cause a
backtrace and thus pollute the stack for the following lua_next() call.
* Adds Lua methods 'set_rotation()' and 'get_rotation'. Also changed some method names to be more clear. Instead of an f32 being sent over network for yaw, now a v3f is sent for rotation on xyz axes. Perserved Lua method set_yaw/setyaw so that old mods still work, other wise to set yaw they would need to switch to set_rotation(0, yaw, 0).
Use the CSM death formspec when CSM is enabled and use the engine death formspec when CSM is disabled.
Move the CSM death formspec code to a dedicated file.
Works by detecting a collision while moving forward and then
simulating a jump. If the simulated jump is more successful,
an artificial jump key press is injected in the client.
Includes setting and key change GUI element for enabling and
disabling this feature.
Use font size 14 for phones.
Use x_inches < 3.7 instead of < 3.5 for small phones.
Add a new category x_inches < 6 for larger phones.
Use HUD scaling 0.85 for larger phones.
Use desktop defaults for tablets.
Previously, each glass face used drawAutoLightedCuboid() to draw a
flat cuboid. This also disallowed backface culling, making the
backface culling inconsistent with 'glasslike'.
Use code from 'glasslike' to draw glass faces using drawQuad().
Remove long-unknown top/bottom textures feature:
Makes the code simpler and cleaner.
Never documented, long-unknown and not of much use.
Previously, 'time_brightness' never fell below the threshold so
night sky colours were not applied.
Increase the threshold value. But now also set it to a value less
sensitive to possible future small changes in 'time_brightness',
by setting it halfway between the 'time_brightness' values for
darkest night and first stage of dawn.
Create CPack WIX msi Installer for RUN_IN_PLACE=0 builds
Correct paths on Windows for RUN_IN_PLACE=0
Install only required font files
Games have their own components, and "minimal" is optional
Mods will now have to initialize the list/slot in order to define the default player hand.
They may use the inventory callbacks to prevent abuse of this list.
Improve codestyle.
Add clarifying comments.
Use 'movement_gravity' setting and physics override instead of hardcoded value.
Halve number of particles in final 'node dug' burst.
Avoid extremely small, near-invisible particles.
Increase velocity to increase number emerging from within a cubic node.
Previously, night clouds were almost indistinguishable from night sky,
especially since a recent commit that made night sky brighter.
They were lacking the beautiful luminosity caused by being lit by the
permanently-full moon.
When 'directional_colored_fog = false' allow the dawn/dusk cloud
brightness boost to apply through the night too.
Set an identical minimum cloud brightness for when
'directional_colored_fog = true'.
Damage flash is shortened from 0.98-1.27s to 0.25s-0.33s to reduce
player in-game blindness, especially useful for combat situations.
It is also visually more comfortable.
Camera hurt tilt is made slightly shorter to match in duration.
Both flash and camera tilt are now of similar length to a typical
damage sound, such as the one used by Minetest Game which is 0.27s.
The 3 effects become more synchronised and unified.
Previously dungeons > decorations > ores.
Decorations depend on the node they are placed on, and ore types are
increasingly able to place large continuous volumes of nodes, such as
strata. Decorations are increasingly being used underground.
The new order avoids a node being changed by ore generation after a
decoration has been placed on it.
The new order also avoids ores appearing in the walls of a dungeon if
the wall nodes match the local stone node.
Make tunnels wider and use the noise parameters of most other mapgens.
All other underground features are already identical to all other
non-mgv6 mapgens, this final change modernises and improves the tunnels.
Also, use a better distance calculation for 'collide with objects'.
Fixes the issue of a vehicle occasionally colliding with its own driver,
causing one of the velocity components to be set to zero.
Add 2 new mapgen flags to make river depth variation and humidity drop
with altitude independently optional, instead of both being enabled by
the 'humid rivers' flag.
Simplify and clarify related code by removing a low priority
optimisation regarding 't_heat'.
Remove unnecessary optimisation bools and use spflags directly instead.
Improve and fix documentation in settingtypes.txt.
A few minor code cleanups.
* Modernize lua read (part 2 & 3): C++ templating assurance
Implement the boolean reader
Implement the string reader
Also remove unused & unimplemented script_error_handler
Add a reader with default value
Some cave segments are outside the mapchunk.
Previously, biome was being calculated by a function that uses the noise
maps. Points outside the mapchunk resulted in incorrect noise map indexes
that were sometimes outside the noise map size, causing a crash.
Use either noise maps or point noise calculations depending on point
location.
When the noise value or fill_ratio >= 10.0 complete coverage is enabled.
This disables random placement to avoid redundant multiple placements
at one position. Instead, 1 decoration per surface node is placed by
looping across each division.
'10' was chosen as this is the fill_ratio that previously created
very near complete coverage. The complete coverage feature therefore
integrates smoothly when noise is used for variable decoration density.
'fill_ratio = 10' should be used by modders who want a decoration
placed on every surface node. Compared to before such a decoration
placement will be 10 times faster.
* Few code updates
* Do not show average RTT before timing out
* Fix unwanted integer division in RTTStatistics
* Fix float format, prettier jitter calculation
* Use +=, 0.1f -> 100.0f for stronger average updates
Previously, the biomemap was 'BIOME_NONE' for a mapchunk column if a
stone surface was not found in it, causing water surface decorations
and water surface dust to fail.
Store the biome ID of the biome calculated at a water surface and add
it to the biomemap if the biomemap is 'BIOME_NONE' for the mapchunk
column. The biome calculated at a stone surface still has priority
for the biomemap entry, as it should.
Edit an incorrect comment.
Revert commit 99143f494711034068685b6ee845ce19fa09d7d9 and commit
f4ca830abe1aa22875c99b31bf2ee56e26f83f05.
These commits caused biome dust to be applied even when there was no core
mapgen terrain in a mapchunk column. So the dust, which overgenerates,
then appeared on structures added by mods in 'on_generated', such as
floatlands, asteroids or above-surface realms.
Adding support for _NET_WM_PID as defined in Extended Window Manager Hints
Move verbose messaging to setupXorgTopLevelWindow method as Xorg messages should only occur when running in Xorg env.
Irrlicht returns the XDisplay as a void* and XWindow as an unsigned long so reinterpret those as the appropriate type. Also fixed a spaces for tab formating issue
Previously the only way to disable biomes was to 'clear' the registered
biomes in a mod, but this method causes large amounts of unnecessary
processing:
1. Calculation of 4 2D noises.
2. Looping through all nodes of a mapchunk replacing nodes with identical
nodes.
The new flag disables those operations.
'generateBiomes()' constructs the biomemap as it generates biomes.
The biome calculated at first stone surface encountered is added to
the biomemap.
Previously, if no stone surface was encountered in a mapchunk column
the biomemap was left empty for that (x, z) position, causing biome
dust and water surface decoration placement to fail.
If at the base of a mapchunk column the biomemap is empty, add the
currently active biome to the biomemap, or if biome is NULL calculate
it for this position and add it to the biomemap.
In some configurations, such as when using the runit supervisor and its
tool chpst, the HOME variable might be unset. This resulted in an
unclear error message that was hard to pin down.
Fix 3 warnings reported by GCC 8.1 of the following type
```src/client/gameui.cpp:191:43: warning: « void* memset(void*, int, size_t) » effacement d'un objet du type non trivial « struct GameUI::Flags »; use assignment or value-initialization instead [-Wclass-memaccess]
memset(&m_flags, 0, sizeof(GameUI::Flags));
```
```
src/translation.cpp:43:16: warning: interception du type polymorphique « class std::out_of_range » par valeur [-Wcatch-value=]
} catch (std::out_of_range) {
```·
Because vein ore uses 3D noise (all the other ores use 2D noise) the
perlinmap Y size can be different in different mapchunks when close
to the ore Y limits.
Previously this caused bugs in the vein structure because changes in
perlinmap Y size did not recreate the noise objects.
Delete and recreate the noise objects with the new Y size if Y size
has changed.
Previously, the centering caused by the 'place center x/z' flags did
not take rotation into account. So schematics with unequal X and Z
dimensions were incorrectly placed. The bug was hidden for schematics
equal in X and Z dimensions.
* g_extrusion_mesh_cache new() and grab() to be managed in constuctor only (#7235 partial)
This global was getting grab()-ed by each call to getItemMesh, incrementing its reference count. What was to be the final drop() in the destructor ended up with > 0 reference count, so memory not freed by Irrlicht.
Previously, caverns confused tunnel generation causing biome top and filler
nodes to appear in caverns.
Split 'generateCaves()' into 2 functions to separate tunnel and large
randomwalk cave generation.
In each mapgen re-order cave generation to generate tunnels before caverns.
Split some long lines.
Edit comments.
Remove unnecessary comments and unnecessary commented-out code.
Use std::fmax/fmin instead of MYMAX/MYMIN.
Remove scope-limiting braces.
Consistently define literals as floats, except in noise parameters.
Cleanup literals in noise parameters.
Remove unnecessary 'near_cavern' line.
Reduce max spawn y to be consistent with other mapgens.
Caverns first appeared in mgvalleys and were later added to other
mapgens as shared code. Now this shared code can replace mgvalley's
internal cavern code.
Also use shared tunnel code instead of internal code.
Changes to mapgen that will affect existing worlds (mgvalleys is not
stable):
Single lava and water sources not added in tunnels.
Previous caverns are unchanged but an equal number of new ones are
added at a distance from the previous.
From y = -256 to 192 nodes below, where the caverns taper at their
upper limit, they will have a slightly different shape as the taper
is now linear.
Instead of calling g_settings->getBool("flag") multiple times
during each movement step, the current settings are cached
in a new player object member. Updated via registered callbacks.
* Android: Add zoom, minimap, and toggle chat button
Zoom button is put above jump button.
Minimap and toggle chat button are put in settings bar.
* Jump button is rotated down button
* Move three buttons on the right screen higher
Fix elusive 5 year old bug that caused mgvalleys large caves to be flat and
limited to mapchunk borders.
Error was fixed 2 years ago in 'CavesV6' but not in 'CavesRandomWalk'.
In the client, raise lower limit from 30 to 45 degrees, to avoid server
seeing this as a zoom and loading world beyond the server-set limit.
Add minimum in settingtypes.txt and enforce lower limit when set using
minetest.conf.
In the server, distrust the client-sent FOV if below the heuristic zoom
threshold and use the player object property 'zoom_fov' to check it, to
protect against hacked clients.
* Android: Replace movement buttons with joystick
Replace movement control buttons (arrows at bottom left screen) with virtual joystick.
Joystick has 8 directions (same as keyboard). Basically, just map it to keyboard input.
Joystick applies only on left 1/3 of screen.
Joystick's position can be fixed by enabling fixed_virtual_joystick setting.
Three new images:
(1) placeholder joystick,
(2) joystick container (background), and
(3) joystick cursor.
Remove unused images: movement control buttons (*_arrow.png).
New data type: touch_gui_joystick_move_id
Joystick's fixed position is spaced one button size from bottom and from left of screen.
Remove unused variable: m_joystick_downlocation
Fix for incorrect translation of empty strings
In the key change menu, when a button key not have name an empty string is passed to gettext.
The empty string is reserved for gettext to return de header of the .po file an this is shoved in the button
Commit 5070ca2111dd5b3f333a942059ef2c592de8dc24 changed sun colour by
fixing what seemed to be a code mistake.
Return to the standard colour but comment-out the first assignment of the
double-assignment for performance.
Add a comment to explain.
Add new biome fields 'node_dungeon', 'node_dungeon_alt', 'node_dungeon_stair'.
If 'node_dungeon' is not defined dungeons fall back to classic behaviour.
Remove messy and imprecise dungeon material code from 'generateBiomes()'.
Code deciding dungeon materials is now in 'generateDungeons()' and uses the
biome at mapchunk centre for more precision.
Remove hardcoded 'MG_STONE' types as long intended.
* Promote performance-type-promotion-in-math-fn as a coding error
* Promote performance-faster-string-find too (which is not problematic currently)
* Same for performance-implicit-cast-in-loop
* Fix remaining tidy points
* src/sky.cpp 146 warn V519 The 'suncolor_f.r' variable is assigned values twice successively. Perhaps this is a mistake. Check lines: 142, 146.
* src/sky.cpp 147 warn V519 The 'suncolor_f.g' variable is assigned values twice successively. Perhaps this is a mistake. Check lines: 143, 147.
* src/sky.cpp 148 warn V519 The 'suncolor_f.b' variable is assigned values twice successively. Perhaps this is a mistake. Check lines: 144, 148.
* src/threading/thread.cpp 63 err V730 Not all members of a class are initialized inside the constructor. Consider inspecting: m_thread_obj.
* src/server.cpp 3243 err V595 The 'log' pointer was utilized before it was verified against nullptr. Check lines: 3243, 3258.
* Use constexpr + unroll some calculations to cache definitively some calculations
* Unroll some calls in collision code & use a constref instead of a copy in one occurence
* Fix many issues reported by clang-tidy
We have many issues in code related to some performance to float <-> double.
Clang-tidy reported it in performance-type-promotion-in-math-fn
I fixed many of them. It's not ready for a promote to blocking
Also fix some value which should be const-ref
* Implement new travis clang-tidy build step
* This step enable some rules and enforce one rule as error
* This permits to have some C++ quality rules based on clang & clang contributor guidelines
* Fix clang-tidy reported problems on push_back -> emplace_back
* Drop EventManager from GameDef & do some client cleanups
* EventManager is only used by Client. Don't expose it on Server & GameDef for nothing
* Drop Client::event() in favor of direct calls to getEventManager
* Cleanup some event put from new + put to put(new)
* MtEvent: add Type(u8) enum
* This will enhance event performance & ensure stricter type
* Drop MtEvent::checkIs (unused)
* clang-tidy reported fixes
* Code style
* Move event_manager.h to the client directory as it's only used by client
Add EventManager unittests + switch to unordered_map as order is not important here
Drop a unused function
minetest/src/script/cpp_api/s_player.h:27:1: warning: struct 'PlayerHPChangeReason' was previously declared as a class [-Wmismatched-tags]
struct PlayerHPChangeReason;
* Cleanup sound manager client
* Use some const refs
* Use auto on iterators
* Drop unused parameters
* Move sound_openal.* to client folder
* Move sound.cpp + OnDemandSoundFetcher to client/ folder + reorganize includes properly
* Server: delegate mod management & config to ServerModConfiguration (rename it to ServerModManager)
* Use c++11 range based loops
* Add unittests + experimental/default mod as a test case to permit testing mod loading in future tests
* isFreeServerActiveObjectId is now part of ServerEnvironment
* getFreeServerActiveObjectId is now part of ServerEnvironment
* StaticObject constructor now take ServerActiveObject instead of type + string. This permits to remove a big string copy in some code parts
* ObjectRef::set_local_animation: fix wrong lua return (should push a boolean, currently returns nil)
* ObjectRef::set_eye_offset: fix wrong lua return (should push a boolean, currently returns nil)
* Fix various Server functions which depends on RemotePlayer objet and return true/false when player object is nil whereas it's a caller implementation error. Change those bool functions to void and add sanitize_check call instead. Current callers are always checking player object validity
* Optimize Server::setClouds : use CloudParams object ref instead of attribute deserialization from structure & perform RemotePlayer::setCloudParams directly in server class like many other calls
* Optimize Server::SendCloudParams: use CloudParams object ref instead of deserialized attributes
Use the --color command line parameter instead of a setting for coloured logs
This fixes the missing warningstream bug, g_settings->get mustn't be used there.
Also, the decision about en- or disabling log colours fits better to the command line parameters than minetest settings.
Change to --worldlist instead of --world list.
Gets rid of --worldpath parameter added as part of this pull request,
instead moving the listing function to a command --worldlist that
accepts either name, path, or both and prints out the corresponding
information.
Returns the decoration ID for the provided decoration name string.
For use with gennotify, to know the decoration IDs for use in
'minetest.set_gen_notify'.
This doesn't check the fields in anyway whatsoever so it should only be seen as a way to mitigate exploits, a last line of defense to make it harder to exploit bugs in mods, not as a reason to not do all the usually checks.
Previously only 'mapgen water source' and 'mapgen river water source'
were checked for. Games can use multiple liquid nodes defined for biomes,
many of which will not be aliased to those 2 mapgen aliases, causing
floating dungeons to generate in some liquids.
Now we check for liquid drawtype instead, so can remove liquid nodes
from dungeonparams.
Also check for 'airlike' drawtype instead of 'CONTENT_AIR' to avoid
generation in 'airlike' nodes in some rare situations. This will also be
needed for when we add definable biome air nodes.
* Rename IWritableNodeDefManager to NodeDefManager
* Make INodeDefManager functions const
* Use "const *NodeDefManager" instead of "*INodeDefManager"
* Remove unused INodeDefManager class
* Merge NodeDefManager and CNodeDefManager
* Document NodeDefManager
* Add minetest.bulk_set_node call + experimental mod unittest
* Optimize set_node function to prevent triple lookup on contentfeatures
Do only one lookup for old, and try to merge old and new lookup if node is same than previous node
* Add benchmark function + optimize vector population to have real results
The CSM HUD PR caused some strange behavior including aborts due to parts of it using some slightly hacky code, the event refactor changing how events are processed and a minor oversight.
* Make InputHandler own the key cache
* Add a helper function InputHandler::cancelPressed to avoid multiple similar calls in game.cpp
* Move RandomInputHandler::step definition into cpp file
Joystick input is a RealInputHandler only usage, make it intelligent and handle the joystick with keyboard direct.
This permits to remove many getters in game which should be owned by RealInputHandler
* Attempt to add registration confirmation
Using SRP auth mechanism, if server sent AUTH_MECHANISM_FIRST_SRP that means the player isn't exist.
Also tell player about the server and chosen username.
Local game has localhost as IP address of the server.
Add RenderingEngine::draw_menu_scene() to draw GUI and clouds background.
aborted -> connection_aborted
* Rewrite information message text
Client::promptConfirmRegister() -> Client::promptConfirmRegistration()
