Introduce a new contentfeatures version (8). When clients
connect using v27 protocol version, they can assume that
the tiledef.backface_culling is trustable, but if clients
connect to servers providing contentfeatures version 7,
then the v27 clients know that backface culling settings
provided by the server in tiledefs are bogus for mesh,
plantlike, firelike or liquid drawtype nodes.
thanks to hmmmm, est31, nerzhul.
Tested on new client - new server, new client - old server
old client - new server.
All places that lock this mutex are only called by the main thread:
ClientMap::updateCamera(), ClientMap::updateDrawList(), ClientMap::renderMap(), ClientMap::renderPostFx().
To avoid spawn search failing in new specialised mapgens
Increase spawn search range to 4000 nodes
Add getSpawnLevelAtPoint() functions to EmergeManager, class Mapgen
and all mapgens
Remove getGroundLevelAtPoint() functions from all mapgens except mgv6
(possibly to be re-added later in the correct form to return actual
ground level)
Make mgvalleys flag names consistent with other mapgens
Remove now unused 'vertical spawn range' setting
Tunnel 3D noises are only calculated when solid terrain is present
in mapchunk, avoiding large amounts of unnecessary calculations
Change 'int' to 's16' in calculateNoise
Change 'i' to 'vi' for voxelmanip indexes for consistency
Keep 'u32 index3d' local to a smaller part of tunnel code
Mgv7: Don't call CaveV7 if no solid terrain in mapchunk
Give 'open' bool a more descriptive name
Replace simple caves with V5 caves, adding unpredictable water and lava
settings and massive caves based on subterrain. Remove fast terrain mode
and accompanying settings. Remove superfluous temperature/humidity
settings. Remove lava/water height setting. Fix errors in humidity
handling and remove humidity_break_point setting. Move cave noises to
generateCaves. Fix minor formatting/naming issues and use
MYMAX/MYMIN/myround.
clock_gettime() is a far better clock than gettimeofday().
Even better than clock_gettime() is that you can select either
CLOCK_MONOTONIC, or even CLOCK_MONOTONIC_RAW. These clocks offer
high precision time. And the _RAW variant will never roll back
due to NTP drift or daylight savings, or otherwise.
I've adjusted this code to select the right clock method auto-
matically based on what's available in the OS. This means that
if you're running a very old linux version, MacOS or other,
you will automatically get the best clocksource available.
I've tested all Linux clocksources by selectively compiling and
running a 10k+ timer test suite. In all cases I confirmed that
the 3 POSIX Linux clocksources worked properly, and were
selected properly.
I've modified the OS X compile path to use the high-res clock
source for all time functions, but I can't confirm it works or
that it compiles.
As for WIN32, I confirmed that the used clocksource is indeed
a Monotonic clocksource, so good news: that code section appears
to be exactly what it should be.
`errorstream` must not be overly verbose as clientside it is directly printed
onto the ingame chat window. These days, the serverlist can contain > 200k bytes,
so better print it to warningstream if the data buffer is too long.
Outdated servers are always sending tiledefs with culling
enabled no matter what, as the value was previously entirely
ignored.
To compensate, we must (1) detect that we're running against
an old server with a new client, and (2) disable culling for
mesh, plantlike, firelike and liquid draw types no matter what
the server is telling us.
In order to achieve this, we need to bump the protocol version
since we cannot rely on the tiledef version, and test for it
being older. I've bumped the protocol version, although that
should have likely happened in the actual change that introduced
the new backface_culling PR #3578. Fortunately that's only 2
commits back at this point.
We also explicitly test for the drawtype to assure we are not
changing the culling value for other nodes, where it should
remain enabled.
This was tested against various pub servers, including 0.4.13 and
0.4.12.
Fixes#3598
Backface culling is enabled by default for all tiles, as this
is how the lua parser initializes each tiledef. We revert to
always using the value from the tiledef since it is always
read and serialized.
Mods that wish to enable culling for e.g. mesh nodes, now can
specify the following to enable backface culling:
tiles = {{ name = "tex.png", backface_culling = true }},
Note the double '{' and use of 'name' key here! In the same
fashion, backface_culling can be disabled for any node now.
I've tested this against the new door models and this properly
allows me to disable culling per node. I've also tested this
against my crops mod which uses mesh nodes where culling needs
to be disabled, and tested also with plantlike drawtype nodes
where we want this to continue to be disabled.
No default setting has changed. The defaults are just migrated
from nodedef.cpp to c_content.cpp.
cloneMesh() has to use a switch in order to create a different
mesh buffer type depending on vertex type. (Credit: the new cloneMesh
was written by RealBadAngel.)
To avoid repetitive code, all other methods use getVertexPitchFromType()
to automatically adapt the indexing to the vertex type at runtime.
The pageflip mode requires a stereo quadbuffer, and a modern graphic
card. Patch tested with NVidia 3D Vision.
The mini-map is not drawn, but that's what is done for topbottom and
sidebyside modes as well.
Also most of the time the user would prefer the HUD to be off. That's
for the user to decide though, and toggle it manually.
Finally, the interocular distance (aka eye separation) is twice as much
as the "3d_paralax_strength" settings. I find this a strange design
decision. I didn't want to chance this though, since it's how the other
3d modes interpret this settings.
Previously, we assumed that reply->str was NULL
terminated. However, this turned out to be not true,
as users reported crashes in strlen connected to
where reply->str was appended to an std::string.
Use the method recomended by the docs, to read the
length separately.
Removing the target file on other platforms was enabled likely unintentionally
by commit 5f1f1151d3a9c113902630adc16cc3f4845da7ba.
This may be the reason why there has been corruption of files on Linux on hard
shutdowns.
Previously I described the problem and this fix in issue #3084.
My commit
e2d54c9f9275e4f77ec33be8054621d42945f7a4 "shutdown when requested from lua in singleplayer too"
broke minetest's feature to connect to servers. The client crashed
after the connection init was complete.
Thanks to @sofar for reporting the bug.
Fixes#3498.
If an `XDG_CACHE_HOME` can't be found or `RUN_IN_PLACE` is enabled,
`path_cache` is left at its default of `$PATH_USER/cache`
(at a time when `PATH_USER` is `..`), rather than being reset to
`$PATH_USER/cache` after `PATH_USER` has been properly set.
This allows other applications (e.g. minetestmapper) to interrogate
the database while minetest is running, without causing an almost
certain minetest crash.
This reverts commit f14e7bac54af65e3d3d99f89f23f114b17058e49.
Reverted due to missinterpretation of agreement, obvious dislike and me not interested in doing fights for feature I don't actually need
This reverts commit 91bafceee6606fab79db1bde4cba01b84fed65c7.
Reverted due to missinterpretation of agreement, obvious dislike and me not interested in doing fights for feature I don't actually need
Previous commit
70ea5d552e283bd5bce3278cbf3819bd87ba2602 "Add support for limiting rotation of automatic face movement dir entitys"
by sapier has broken minetest's feature to open worlds. This was due to a
missing stack pop operation.
Thanks to @oleastre for reporting this bug and suggesting the fix.
3D Mandelbrot/Mandelbar
3D Christmas Tree
3D Mandelbulb
3D Cosine Mandelbulb
4D Mandelbulb
Plus corresponding julia set for each
Add credits for formulas
Rename parameter 'formula' to 'fractal'
Speed optimisations
* Horizontal and vertical are used wrongly. Use height and width because
horizontal/vertical describes different things. Thanks @kilbith for pointing out.
* Update minetest.conf.example and settings_translation_file.cpp
* Correct maximum/minimum copy paste mistake.
Fix the type of the threshold value for mapgen.
The commit
a78dd7f2b6b0e1fefdbaa1ae21b722dd4459e4f4 "Fix spelling of noise_threshold"
has changed it to be read as int, but it can have non-integral values too.
Thanks to @kwolekr for pointing this out.
To terminate unwanted shadows from floatlands or realms above
Also add to LuaVoxelManip calc_lighting for use in mapgen mods
Remove the 2 argument calcLighting, mapgens now use the 5
argument form to specify the volumes for propagateSunlight and
spreadLight
In mgsinglenode replace calcLighting with setLighting and
clean-up use of tabs and spaces
On openSUSE luajit is not detected correctly.
This is because openSUSE is using a lua version suffix, like other Linux distributions do it also.
So the include directory is:
include/luajit-5_1-2.0
A segfault exposed a missing 'vm->m_area.contains()'
check in makeCorridor that allowed the calculation
of vm index for a node outside the vm area. The huge
and invalid index number caused getContent to fail
Fixes bug for which commit
6c37e89f08f962eaba788a31f5d3c798ceaa65e6 "Fix old client showing duplicated health bar on new server"
by @sapier
laid the groundwork, where the server has
updated its copy of the hud flags without
respecting the mask.
Fixes#3395.
Flag is set by default in MapgenParams
The global 'trees' flag remains but is now
undocumented and unset by default in MapgenParams
Add mgv6_spflag 'trees' set by default in
defaultsettings.cpp to affect new worlds only
This is automatically backwards
compatible for existing worlds
* Remove trailing lines from src/sound_openal.cpp
* Don't do a horribly ugly copy of the file's path, allocating and deallocating a
10 kb buffer in the process. This copy was needed for backwards compatibility
with libvorbis 1.3.1 and earlier, as the removed comment explains.
However, even Ubuntu precise has 1.3.2 already. Dropping support and sparing
the ugly copy can therefore be considered safe.
* Actually load sounds from the memory, not caching them at the disk first,
removing the old hack. This is the main motivation for the commit.
Fix regression of commit
5e507c9829942c434a6f1ae7a4f3a488c7e50bef "Add server side ncurses terminal"
which allowed all players, even those without a shout priv, to chat.
Fixes#3362.
Fix regression of commit
5e507c9829942c434a6f1ae7a4f3a488c7e50bef "Add server side ncurses terminal"
where no line termination character was printed after a
lua print outside of terminal mode.
Fixes#3350.
This adds a chat console the server owner can use for administration
or to talk with players.
It runs in its own thread, which makes the user interface immune to
the server's lag, behaving just like a client, except timeout.
As it uses the same console code as the f10 console, things like nick
completion or a scroll buffer basically come for free.
The terminal itself is written in a general way so that adding a
client version later on is just about implementing an interface.
Fatal errors are printed after the console exists and the ncurses
terminal buffer gets cleaned up with endwin(), so that the error still
remains visible.
The server owner can chose their username their entered text will
have in chat and where players can send PMs to.
Once the username is secured with a password to prevent anybody to
take over the server, the owner can execute admin tasks over the
console.
This change includes a contribution by @kahrl who has improved ncurses
library detection.
The Atomic implementation was only partially correct, and was very complex.
Use locks for sake of simplicity, following KISS principle.
Only remaining atomic operation use is time of day speed, because that
really is only read + written.
Also fixes a bug with m_time_conversion_skew only being decremented, never
incremented (Regresion from previous commit).
atomic.h changes:
* Add GenericAtomic<T> class for non-integral types like floats.
* Remove some last remainders from atomic.h of the volatile use.
It isn't possible to use atomic operations for floats, so don't use them there.
Having a lock is good out of other reasons too, because this way the float time
and the integer time both match, and can't get different values in a race,
e.g. when two setTimeofDay() get executed simultaneously.
Cleanup:
* Remove volatile keyword, it is of no use at all. [1]
* Remove the enable_if stuff. It had no use either.
The most likely explanation why the enable_if stuff was there is that it
was used as something like a STATIC_ASSERT to verify that sizeof(T) is not larger
than sizeof(void *). This check however is not just misplaced in a place where we
already use a lock, it isn't needed at all, as gcc will just generate a call to
to the runtime if it compiles for platforms that don't support atomic instructions.
The runtime will then most likely use locks.
Code style fixes:
* Prefix name of the mutex
* Line everything up nicely, where it makes things look nice
* Filling \ continuations with spaces is code style rule
Added operations on the atomic var:
* Compare and swap
* Swap
The second point of the cleanup also fixes the Android build of the next commit.
[1]: http://stackoverflow.com/q/2484980
On Windows Release x64 bit build this changes:
ProfilerGraph::put
1.68% -> 0.061%
ProfilerGraph::draw
12% -> 17.%
So yes, there is a tradeoff between saving profiling data
(executed always) and drawing the profiler graph (executed very rarely).
But usually you don't have the profiler graph open.
For several years now, the lua script lock has been completely broken.
This commit fixes the main issue (creation of a temporary rather than
scoped object), and fixes a subsequent deadlock issue caused by
nested script API calls by adding support for recursive mutexes.
When compiled with optimizations, the most recent versions of clang seem
to 'optimize' out a crucial "and %reg, 0x7FFFFFFF" instruction in noise2d(),
probably because it somehow assumed the variable n would never become greater
than that amount.
Indeed, signed integer underflow is undefined behavior in C and C++, so while
this optimization is "correct" in that sense, it breaks lots of existing code.
Solved by changing n to an unsigned type, making behavior well-defined.
Previously, the server called FATAL_ERROR when a Lua error occured.
This caused a (mostly useless) core dump.
The server now simply throws an exception, which is caught and printed before
exiting with a non-zero return value.
This also fixes a number of instances where errors were logged multiple times.
Increase default from 6 to 16 to help with mgv7 and mgfractal
Large-scale or alternative mapgens can result in a lowland spawn point not
being found, causing a spawn at (0, 0, 0) possibly buried underground
The max height is now settable to allow correct player spawn
in any mapgen or when using custom noise parameters
Use this macro to disallow copying of an object using the assignment
operator or copy constructor. This catches otherwise silent-but-deadly
mistakes such as "ServerMap map = env->getMap();" at compile time.
If so desired, it is still possible to copy a class, but it now requires
an explicit call to memcpy or std::copy.
-> Put access to time variables under the time lock.
-> Merge both time locks, there is no point to have two locks.
-> Fix the lock being released too early in Environment::setTimeOfDay
-> Add serverside getter so that you don't have to get
the environment if you only have the server
Previously, the invocation of Logger::addOutput(ILogOutput *out) led to
an out of bounds write of the m_outputs vector, resulting in the
m_silenced_levels array being modified.
Fortunately, the only caller of that method was android system logging,
and only since a few commits ago.
-> Get rid of Logger::logToSystem and use normal downstream output system for android instead
-> Give the downstream output system more information: enrich the log function of ILogOutput
with information and add ICombinedLogOutput for easier use.
-> Make Logger::getLevelLabel() static and public so that it can be used by downstream log output.
-> Add g_ and m_ prefixes where required
* Add key settings to setting table and ignore them later
This way they are added to the auto-generated minetest.conf.example
* Add flags type
* Add input validation for int, float and flags
* Break in-game graphic settings into multiple sections
* Parse settingtpes.txt in mods and games
* Improve description for a lot of settings
* Fix typos and wording in settingtypes.txt
* Convert language setting to an enum
Flushes the buffer of rollback actions that wait to get saved in two more situations:
1. Flushes in the destructor of the rollback. This makes the server not
forget the last < 500 rollback entries when it shuts down.
2. Flushes the rollback when /rollback_check is invoked. This is neccessary
as otherwise it leads to confusion if users want to test the rollback functionality
by placing a node and then executing the check on it, or if the actions were
very recent out of other reasons.
Everywhere where wstrgettext was used, its output was converted back
to utf8. As wstrgettext internally converts the return value
from utf8 to wstring, it has been a waste. Remove the function, and
use strgettext instead.
- setOpenedTrees(): this internal function was calling setSelected()
to update m_selected. Since setSelected() calls autoScroll(),
this caused the scrollbar to scroll back to the selected row
in some cases when that shouldn't be done.
For example, clicking the "+" to open a tree caused autoscroll.
Fix this by making setOpenedTrees() modify m_selected directly.
- setDynamicData(): set scrollbar position after calling
setSelected(), not before. This avoids setSelected()'s autoscroll
messing up the scrollbar position again.
- setSelected(): If an invisible row is selected, open all parents
of the selected row in order to make the selected row visible.
This fixes the issue where all the trees are closed again whenever
you return from the setting edit dialog to the settings tab.
- Fix some incompatibilities with obscure platforms (AIX and WinCE)
- Clean up Thread class interface
- Add m_ prefix to private member variables
- Simplify platform-dependent logic, reducing preprocessor
conditional clauses and improving readibility
- Add Thread class documentation
The invsize formspec element is outdated. Even though,
it is still supported, only a deprecation warning is shown,
introduced by commit [1]. The lua context passed to the
log_deprecated method added by commit [1] is NULL for the
invsize deprecation warning, as its run on the client and not
the server.
Commit [1] has removed checks for NULL inside the log_deprecated
method, resulting in a crash when a formspec with an invsize
element is parsed. This commit puts the check back.
Fixes#3260.
Referenced commits:
[1]: b5acec0a3c5701c53854ff7afdf4008863e6e8df "Add proper lua api deprecated handling"
[2]: 7b8d372947aae232ddf598155e972bb4dda157a "Use warningstream for deprecated field messages and refactor log_deprecated"
Commit
d2ca662569427d36642660314668e416bf68f3c8 "Enforce hiding nametag"
didn't fix the issue for "client" instances, where the nametag update
was received before the object was added to the scene. This resulted
in the grey shadow on the nametag that commit tried to fix.
Thanks to @neoascetic for pointing out that there still is a shadow.
- Add warning log level
- Change debug_log_level setting to enumeration string
- Map Irrlicht log events to MT log events
- Encapsulate log_* functions and global variables into a class, Logger
- Unify dstream with standard logging mechanism
- Unify core.debug() with standard core.log() script API
- SRP: print the address only once, not twice
- Legacy: previously the address was not printed at all
- Make both messages structurally the same, to facilitate log analyzers
Player now spawns on julia set due to julia offset
Add commented-out '#include profiler.h' for timetaker use
Use v3fs to reduce number of parameters
Tune tunnel width to match mgv7
Fixes a bug where the old list ring remained when a new formspec
was displayed over the old one. This created the list-ring of the new formspec
to be partly ignored.
Thanks to @VanessaE to report the bug, and @DonBatman to produce the code that
exposed it.
This might break some mods, but it is important for all uses of the param2 to
be documented.
This doesn't need a serialisation version or network protocol version change,
as old clients will still work on new servers, and it is bearable to have
new clients getting non rotated plants on old servers.
It returns the index used in mg->biomemap for a given biome name.
The biomemap is useless without this unless you re-register all existing biomes,
which could cause problems for anyone else trying to use biomemap.
With this, you can quickly create a lookup table of ids and names.
Get facedir by using lowest 5 bits of param2 and limiting to 23
More robust, frees up higher param2 bits for other uses
Change lookup table and table index to u8
1. Check for entity addition success in spawn_item implementation
2. Check for success in item_drop callback, so that the player
doesn't lose the item if they are outside bounds and try to drop it.
3. When existing player joins game, check that their position is inside
map bounds. If not, set their position to the return value of findSpawnPos().
4. Make findSpawnPos() respect the border
2 fixes a lua crash if a player drops an item outside map bounds.
3 fixes an assertion crash if a player leaves when being outside map bounds,
and then rejoins.
Because the count is serialized as u16, this would cause overflow.
If minetest later deserialized a mapblock with an incorrect
static object count, it would be unable to find the NameIdMapping
(which comes after the StaticObjectList) and abort with an error
such as "Invalid block data in database: unsupported NameIdMapping
version" (issue #2610).
Sidelen larger than 16 is essential for low density decorations
With sidelen > 16 chunksize may not be divisable by sidelen if
chunksize is changed, in this situation setting sidelen = chunksize
is desirable and should not create error messages.
Change a remaining assert(0) call to FATAL_ERROR(msg).
There was a regression since commit
ced6d20295a8263757d57c02a07ffcb66688a163 "For usages of assert() that are meant to persist in Release builds (when NDEBUG is defined), replace those usages with persistent alternatives"
where when an "uncatched" exception is thrown inside a "side thread",
the program doesn't abort anymore.
This led to the problem @netinetwalker experienced where the emergethread
got an unhandled exception for loading a mapblock while redis was loading,
(see #3196) and then jmped outside its loop to work down its queue.
This resulted in the server not doing any emerges anymore.
Thanks to @netinetwalker for spotting the error, proposing a fix, and testing it.
Error due to @est31's merging changes to PR #3202 to add more error reporting for invalid reply types, commit:
524a7656e3e5cd671b05c13e2ad69cb84bad0423 "redis: throw error if block request failed"
Now we branch out on the valid reply type "not found".
On world load the collision code can not see node boxes, since the
nodes have not been loaded. Thus it collided only at the next full
node. However, standing on a slab on world load leaded to sinking into
it until the world finished loading. Then one maybe fell further, if
the node below was not walkable.
Now, with this commit, when no node around the player has been loaded
it simply does not move the player.
Fixes#3196. Before, we didn't throw an error, and the engine thought the
block isn't occupied. But in fact it might be that redis is still loading,
and the block does exist in the database. The result was a cheesy map.
Why doing things simple ? Use pointer instead of strings to save players and remove them.
Saving players by name does a lookup to find pointer we already have ! Idem with removePlayer
Also remove unused removePlayer(peer_id), it's never called
-> Don't pass pointer to whole IGameDef to NodeMetadata constructors
and deserializers, but only to IItemDefManager, which is needed
-> Remove the unused content_mapnode_get_new_name() method
-> Fix style for MapBlock::deSerialize and MapBlock::deSerialize_pre22,
improving accuracy of error messages a bit
-> Fix style at other serialisation methods too
-> Improve accuracy of some comments
Use std::queue instead of std::set, we don't need such a heavy container.
Don't convert position to int to convert it back to float in the next function.
The legacy code added in commit
d879a539cd19ddd1ee34afec2512fb2238de2822 - "Add minetest.swap_node"
for sending the whole mapblock to older clients on the case of a node
modification with swap_node, had the problem that the block chosen to be
sent to the client was referenced with node coordinates and not with
block coordinates, resulting in getting the wrong block sent to the client.
Entity positions are serialized as F1000. Disallow placing
entities outside safe borders with the minetest.add_entity
call.
Note that this patch only enforces those boundaries for
placing entities, moving entities that move outside boundaries
aren't affected.
Thanks to @nanepiwo for pointing this out.
1. Do two renames:
* SER_FMT_CLIENT_VER_LOWEST -> SER_FMT_VER_LOWEST_WRITE
* SER_FMT_VER_LOWEST -> SER_FMT_VER_LOWEST_READ
Now the two define values are consistently named with the _WRITE defines
SER_FMT_VER_{HIGHEST,LOWEST}_WRITE, and to better point out what the two
serialisation versions actually are for.
2. wrap some lines in doc/worldformat.txt, and point out that the node
timers are serialized at a later point, as this can cause confusion about
what now happens (if one doesn't strictly read the if block's conditions).
3. some whitespace fixes in NodeTimerList::serialize, and one new comment.
Modders are now able to select the range of ore column height,
and the midpoint at which they 'grow' starting from.
This commit adds three new parameters for the 'sheet' ore type:
column_height_min, column_height_max, and column_midpoint_factor.
clust_size is now deprecated for this ore type.
Its obvious that "u16 command" is inside every packet, therefore this
commit removes all mentions of the command, if non-array like notation
is used. We already didn't add "u16 command" to new packets or removed
it at packet changes, so now we remove it from existing packets.
Use in-place locale directory if that exists, and
static one (RUN_IN_PLACE or CUSTOM_LOCALEDIR) doesn't exist.
Report to errorstream if neither static nor in-place locale
dirs exist, and report successfully found paths to infostreem.
Fixes two bugs:
-> Regression of commit [1] where if we use RUN_IN_PLACE=false,
but don't make install, locales aren't found. One might
think this is no regression, as its no bug, but all other
paths (mainmenu, etc.) are detected properly.
-> Regression of commit [1] where locales don't work on windows.
References:
[1]: Commit 645e2086734e3d2d1ec95f50faa39f0f24304761 "Use CUSTOM_LOCALEDIR if specified" by @ShadowNinja
Commit
e4bff8be94c0db4f94e63ad448d0eeb869ccdbbd - Clean up threading
by @ShadowNinja has broken the OSX build.
Including things inside a namespace isn't good.
Also fixes#3124.
Before, calling get_areas_in_area for an areastore with both
include_borders and include_data would result in a lua error,
if there was at least one area as result:
attempt to index a number value in function 'get_areas_in_area'
The commit
8f9af57314f71aae1cc77e13f9996e13015d776d "Add core.get_dir_list" by @ShadowNinja
has removed the implementation of the l_get_dirlist function and all its usages
from the l_mainmenu.cpp file, but hasn't removed it from the header file.
The reason why this hasn't been detected earlier is that C++ has this interesting
feature to still make it possible to create instances of classes whose never used
private methods are declared but not defined.
Preserves the rare unbroken protruding dungeons
Fix random range for first room roomplace
Fix checked volume for first room 'fits' bool
and check for 'untouchable' flag instead of 'inside'
Remove 'enable floating dungeons' setting
* Rename everything.
* Strip J prefix.
* Change UpperCamelCase functions to lowerCamelCase.
* Remove global (!) semaphore count mutex on OSX.
* Remove semaphore count getter (unused, unsafe, depended on internal
API functions on Windows, and used a hack on OSX).
* Add `Atomic<type>`.
* Make `Thread` handle thread names.
* Add support for C++11 multi-threading.
* Combine pthread and win32 sources.
* Remove `ThreadStarted` (unused, unneeded).
* Move some includes from the headers to the sources.
* Move all of `Event` into its header (allows inlining with no new includes).
* Make `Event` use `Semaphore` (except on Windows).
* Move some porting functions into `Thread`.
* Integrate logging with `Thread`.
* Add threading test.
This bypass had to be re-enabled as some users reported issues,
even after the iconv build fix.
While utf8_to_wide works well, wide_to_utf8 is quite broken
on android, for some reason, and some devices (unrelated from build
configuration).
Before, this lua code led to a crash:
local pcg = PcgRandom(42)
local value = pcg:next()
This was because if you called s32 PcgRandom::range(min, max) with the
minimum and maximum possible values for s32 integers (which the lua
binding code did), u32 PcgRandom::range(bound) got called with 0 as the
bound. The bound however is one above the maximum value, so 0 is a "special"
value to pass to this function. This commit fixes the lua crash by
assigning the RNG's full range to the bound 0, which is also fits to the
"maximum is bound - 1" principle, as (u32)-1 is the maximum value in the
u32 range.
When tunnels entirely above ground were avoided, the
missing pseudorandom calls changed the allowed caves.
Now, above ground tunnels are not placed while
still running all previous pseudorandom calls.
Multiplying by a factor of 1/1000.f (rather than dividing by 1000.f) directly
introduces an error of 1 ULP. With this patch, an exact comparison of a
floating point literal with the deserialized F1000 form representing it is now
guaranteed to be successful.
In addition, the maxmium and minimum safely representible floating point
numbers are now well-defined as constants.
Before, android_version.h got changed at every new commit. Now, we
only change it with new minetest releases. Analogous to how cmake
does it, we add an android_version_githash.h file that communicates
the git hash to C++ code.
Also, unify VERS_MAJOR, VERS_MINOR and VERS_PATCH variable
calculation inside the whole makefile.
-> Remove the SendableMediaAnnouncement struct
-> Forge the packet directly in the m_media loop, spare one loop and the construction of a vector
-> Use preincrement to spare iterator copies
Before, our libiconv build was a joke. We first called configure for our own build host system,
then called make, before we executed a Android.mk script we provided as patch. The first "native make"
always failed, and the LIBICONV_LIB file setting in our Makefile didn't match the built one,
resulting in an always-rebuild of iconv.
This commit cleans up this total mess, removes the double-build, and the Android.mk, and properly calls
./configure with the according target platform, and uses a built toolchain.
As we have to deal with the android bug "NDK: Support for prebuild libs with full sonames"
https://code.google.com/p/android/issues/detail?id=55868
as the 2013 patch
https://lists.gnu.org/archive/html/libtool-patches/2013-06/msg00002.html
by Google's David Turner wasn't inside the 2011 libtool, we pass -avoid-version to
libtool.
Thanks to the proper build, wide_to_utf8 works for android now, removing us of the need to disable it.
This was needed due to the TileDef serialisation changes. Originally it has been planned
to also add utf-8 based chat to 26, but chat changes aren't final yet, so they are done
in one change, after the release, and not two small ones, causing us having to be compliant
to three versions of the packet.
-> Fix server crash with protocol >=25 if a default password is set.
-> Remove some useless and possibly confusion causing code for the TOCLIENT_FIRST_SRP packet handler
-> Fix bug where MoveSomewhere from an infinite source would fill the destination inventory with copies of itself.
-> Fix bug where MoveSomewhere would needlessly call callbacks.
-> Remove trailing whitespaces
The neighbours checked are the 8 nodes horizontally surrounding the decoration base
and the 8 nodes horizontally surrounding the ground node below the decoration
Use wide_to_utf8 and utf8_to_wide instead of wide_to_narrow and narrow_to_wide at almost all places.
Only exceptions: test functions for narrow conversion, and chat, which is done in a separate commit.
Previously, m_proto_ver was set to the serialisation version
inside the legacy init packet.
Now, if the server doesn't send a protocol version (protocols < 25),
we set m_proto_ver to some value < 25 and > 0.
* Use enum for GENERIC_CMD_*
* Rename m_attachements to attachement_parent_ids (public member and clearer name)
* Rename GENERIC_CMD_SET_ATTACHMENT to GENERIC_CMD_ATTACH_TO
* USHRT_MAX + 1 buffer sizes to prevent overflows as @kahrl suggested
* Remove unneccessary m_id from GenericCAO (shadowing protected superclass member for no reason) as @kahrl suggested
* Make method (more) consistent with current code stlye
* Move index into loop constructor after @rubenwardy's suggestion
* Cache inv_s->getList(s.listname), which removes a possibly bad scenario
of inv_s being null.
* Properly check for validity
Adds list-rings, a method to implement item sending between inventories via shift-click.
Nice insider feature: a ring consisting of a single inventory list serves as nice clean-up method.
Also adds them to minimal game, and the standard inventory.
Craft output slots are not supported.
If you run minetest with valgrind, you'll quickly notice uninitialized jump
depend error messages that point to s_base.cpp:131. This commit fixes those.
Spare direct multoplication, use constant MapBlock::nodecount instead of
local nodecount variables.
Also use strides at one place instead of multiplications.
Commit 11a96e4901ce54c4646e47866f7a66cd9034c16b
commented out version parsing, resulting in the version byte being parsed as part of the color,
making nametags dark grey.
Re-introduces version parsing and ignores the packet if the version is more recent than ours,
fixing the unused variable warning (should have been done anyway).
This adds the ability to grab 'slices' of noise calculated by PerlinNoiseMap.
Retrieving smaller slices of noise from the computation result as needed
optimizes memory usage while maintaining a reasonable amount of CPU overhead.
Before this commit autofast for Android was ignored if the user was sneaking, digging or building. There is no reason for this and it impedes movement control
Adds everything needed for SRP (and everything works too),
but still deactivated, as protocol v25 init packets aren't final yet.
Can be activated by changing the LATEST_PROTOCOL_VERSION header to 25
inside networkprotocol.h.
- Add ability to explicitly reset NodeResolve state (useful for unittesting)
- Remove non-essential NodeResolve methods modifying state from INodeDefManager
- Add const qualifier to NodeDefManager and ContentFeatures serialize
This fixes the problem where 0.4.12-dev versions were erroneously shown as
0.4.11-dev because the tag was added on a separate branch. It also fixes a
similar issue when builders didn't fetch new tags when updating.
This also removes the number-of-commits-since-tag field, since it's
incompatible with this. Said field doesn't seem to be useful anyway if you
have the commit hash.
Move place_on check to before place_center_x/y/z displacement of p
Reduce displacement of p by place_center_x/y/z flags
to correctly position schematics
This reverts commit 972d17baea81ffe6d508b291ef97207a4822e1da.
The commit being reverted was unauthorized. There had been no discussion,
review, or sign-off prior to submittal to upstream.
Fixes build, which has been broken for all platforms (except BSD?) since
grandparent 406d9ba87b9f6e57b86c6282bf157e3341aa195c.
Thanks to @SmallJoker for pointing out a solution.
Change types for passed password from wstring to string, which removes converting
back and forth in most cases. Move the narrow_to_wide conversion, where its neccessary,
closer to irrlicht. Remove trailing spaces in guiPasswordChange.cpp. Make parameters for
translatePassword passed as const reference.
Fixes path detection when compilers have been told to follow a standard, e.g. with -DCMAKE_CXX_FLAGS=--std=c++98.
To see the passed defines, try this with and without the --std parameter:
gcc -E -dM --std=c99 - < /dev/null | grep linux
Build broke since last commit 479f38973e13680d6a39d9c2a7f29fd330b67d41 for compilers not supporting C++11.
Pre C++11, the constructor of std::ifstream only allows C like strings.
NodeResolver name lists now belong to the NodeResolver object instead of
the associated NodeDefManager. In addition to minimizing unnecessary
abstraction and overhead, this move permits NodeResolvers to look up nodes
that they had previously set pending for resolution. So far, this
functionality has been used in the case of schematics for
serialization/deserialization.
This greatly increases crafting performance, especially in worlds with many mods.
Approved by @kwolekr.
Introduces a hash-type-layered fall-through mechanism, where every layer specifies one hash algorithm,
and the "deeper the fall", the more collisions to expect for the algorithm. One Craft definition
only resides at one layer, which improves speed for lower layers (and a complete fail), due to most
craft definitions residing at high layers.
Due to the fall-through design, the undocumented behaviour that later craft recipes
override older ones had to be weaked up a bit, but craft recipes with the same hash and layer
will still override.
Move debug streams to log.cpp|h
Move GUI-related globals to clientlauncher
Move g_settings and g_settings_path to settings.cpp|h
Move g_menuclouds to clouds.cpp|h
Move g_profiler to profiler.cpp|h
- General code cleanup
- Unified object creation and loading
- Specifying objects in APIs is now orthogonal (i.e. anything can take an ID,
name string, or the raw table definition (and automatically registers if present
Because we get a Buffer<u8> from ConnectionEvent, don't convert it to SharedBuffer<u8> and return it to Server/Client::Receive which will convert it to NetworkPacket
Instead, put the Buffer<u8> directly to NetworkPacket and return it to packet processing
This remove a long existing memory copy
Also check the packet size directly into Connection::Receive instead of packet processing
Filename screenshot_ + ISO 8601 format + [-serial]
i.e. screenshot_YYYY-MM-DDTHH::MM::SS[-serial].png
Serial is added if the filename + timestamp already exists and is in the range 1 to 999
Invert the meaning of holding down the fast button (i.e. holding down the fast button -- if there is one -- means walk), unless performing an action, sneaking or jumping.
Still requires fast move to be toggled on (and fast priv)
* Combine client and server man pages.
* Update unit test options and available databases in man page.
* Add `--worldname` to man page.
* Fix a bunch of places where `"Minetest"` was used directly instead of `PROJECT_NAME`.
* Disable server build by default on all operating systems.
* Make `ENABLE_FREETYPE` not fail if FreeType isn't found.
* Enable LevelDB, Redis, and FreeType detection by default.
* Remove the `VERSION_PATCH_ORIG` hack.
* Add option to search for and use system JSONCPP.
* Remove broken LuaJIT version detection.
* Rename `DISABLE_LUAJIT` to `ENABLE_LUAJIT`.
* Rename `minetest_*` variables in `version.{h,cpp}` to `g_*`.
* Clean up style of CMake files.
Client doesn't like to receive multiples SendInventory for one action, this can trigger glitches on clients (sometimes due to incorrect UDP packet ordering due to UDP protocol)
This fix issue #2544
This feature is still experimental and has some issues. Also,
increase texture_min_size to 64 px. The setting was initially
a conservative 16 so that the effect would not be noticable
for players who aren't using aniso/bi/trilinear filtering. This
isn't necessary now that texture_clean_transparent is disabled
by default.
Replace it with an errorstream + assert for server
This throw can be trigger by LuaError exception or ConnectionBindFailed exception in the following functions:
* EmergeThread::Thread()
* ScriptApiEnv::environment_Step()
* ScriptApiEnv::player_event()
* ServerThread::Thread()
This throw can be trigger by LuaError exception or ConnectionBindFailed exception in the following functions:
* EmergeThread::Thread()
* ScriptApiEnv::environment_Step()
* ScriptApiEnv::player_event()
* ServerThread::Thread()
* TOSERVER_INIT_LEGACY
* TOSERVER_DELETEDBLOCKS
* TOSERVER_GOTBLOCKS
* TOSERVER_REMOVED_SOUNDS
Also use a std::vector instead of std::set for TOSERVER_REMOVED_SOUNDS
* TOSERVER_INIT and TOCLIENT_INIT renamed to _LEGACY
* TOSERVER_PASSWORD merged from dev-0.5, can use protocol v24 and v25
* TOCLIENT_ACCESS_DENIED merged from dev-0.5, can use protocol v24 and v25, with normalized strings an a custom id for custom errors
* new TOSERVER_INIT packet only send MT version, supported compressions, protocols and serialization, this permit to rework everything later without break the _INIT packet
* new TOSERVER_AUTH packet which auth the client
* new TOCLIENT_HELLO packet which send server serialization version atm
* new TOCLIENT_AUTH_ACCEPTED which is send when TOCLIENT_AUTH was okay. After this packet, the client load datas from servers, like after TOCLIENT_INIT_LEGACY packet
Previously, tooltips didn't unescape escaped formspec texts.
Item descriptions that trigger tooltips like inside inventories or for item_image_button
don't need to get unescaped, as they don't get set using formspec, but from lua.
Behaviour on Android remains the same until other alternatives can be devised (if possible)
See #2425 (and the many other -- now closed -- issues reporting this feature as a bug)
* setTimeOfDaySpeed already lock a mutex when modify the value, we don't need to lock all environment.
* add a fine grain lock for getTimeOfDay and setTimeOfDay to solve environment multithread modifications on this value
* Call UpdateCrafting into SendInventory because this functions is only called before SendInventory
* Use Player* instead of peer_id for UpdateCrafting because SendInventory already has the Player* pointer, then don't loop for searching Player* per peer_id
* m_env_mutex don't need to be used with this modification because it's already locked before the calls
Directely or indirectly optimises the following functions:
* MapBlockMesh::MapBlockMesh
* MapBlockMesh::getTileInfo
* MapBlockMesh::makeFastFace
* MapBlockMesh::getSmoothLightCombined
* Remove --enable-unittests and --disable-unittests and add --do-unittests function
* --do-unittests function will exit 0 on success.
* minetest and minetestserver binaries are launched with --do-unittests in travis build.
Client now informs about incompatible servers from the list, this permits to prevent the protocol movements.
Server announces its supported protocol versions to master server
This greatly reduce the number of std::list generated by caching the result, which is always constant for each radius selected.
In the callgrind map, you will see original:
* 3.3M calls to std::list for 9700 calls to getFacePositions
In the modified version, you will see:
* 3.3K calls to std::list for 6900 call to getFacePositions
Callgrind map is here: #2321
it's a huge performance improvement to l_find_node_near
NetworkPacket.cpp:
* Remove some deprecated functions, we must use streaming interface
* m_data converted from u8* to std::vector<u8>
* Add an exporter to forge packet to Connection object
* implement operator << std::wstring. n
* implement operator << std::string
* dynamic resize when write packet content.
* fix string writing and performances.
* create ServerCommandFactory, used by client to get useful informations about packet processing (sending).
* Reliability
* Transmit channel
* Implement putRawString for some ugly char (_INIT packet), and use it.
* Many packet read and write migrated
* Implement oldForgePacket to interface writing with current connection
* fix U8/char/bool writing
* fix string writing and performances.
* add some missing functions
* Use v3s16 read instead of reading x,y,z separately
* Add irr::video::SColor support into packets
* Add some missing handlers
* Add a template function to increase offset
* Throw a serialization error on packet reading (must be improved)
PacketFactories:
* Create ServerCommandFactory, used by client to get useful informations about packet processing (sending).
* Create ClientCommandFactory, used by server to get useful informations about packet processing (sending).
Client.cpp:
* implement NetworkPacket ::Send interface.
* Move packet handlers to a dedicated file
* Remove Client::Send(SharedBuffer)
Server.cpp:
* implement NetworkPacket ::Send interface.
* Rewrite all packets using NetworkPacket
* Move packet handlers to a dedicated file
* Remove Server::Send(SharedBuffer)
ClientIface.cpp:
* Remove sendToAll(SharedBuffer<u8>)
Connection.hpp rework:
* Remove duplicate include
* Remove duplicate negation
* Remove a useless variable
* Improve code performance by using a m_peers_list instead of scanning m_peers map
* Remove Connection::Send(SharedBuffer)
* Fix useafterfree into NetworkPacket Sending
* Remove unused Connection::sendToAll
Test.cpp:
* Remove dead code
* Update tests to use NetworkPackets
Misc:
* add new wrappers to Send packets in client, using NetworkPacket
* Add NetworkPacket methods for Connection
* coding style fix
* dead code since changes cleanup
* Use v3s16 read instead of reading x,y,z separately in some packets
* Use different files to handle packets received by client and server
* Cleanup: Remove useless includes
ok @Zeno-
Tested by @Zeno- @VanessaE and @nerzhul on running servers
* Move networkcode to a dedicated directory
* Rename clientserver.h to network/networkprotocol.h (Better name) and sanitize some includes
* Create object NetworkPacket
* It stores command (opcode) and data separated
* It also stores peer_id
* Data reading can be done by using a streaming interface
* Change packet routing analysis
* Remove old conditional analysis
* Now uses function pointed analysis and add connection state ({Client,Server}::handlers)
* Connection state permit to categorize condition to handle before analyze packets
* Create a handler for depreciated messages, instead of duplicating code
Conf.example: Add mgv7 cave1, cave2 noiseparams
Mgv7: Make skipping of mountain code relative to y=0 not water level
Mountain noise offset now -0.6 to compensate
Tune chance of large caves
When SER_FMT_VER_LOWEST is set to zero, then the test is stupid in INIT because all client works. In mapblock we check if client's serialization version is < 24, but if client sent serialization version < 24 (15 for example) the server set it and tried to send nodes, then BOOM
To resolve the problem:
* Create a different CLIENT_MIN_VERSION to handle this problem
* Remove the exception
* Use an assert in case of bad developer code
nerzhul is (may?) be working on a new solution. For the moment this is reverted because old worlds cannot be loaded (see discussion on github for the commit).
This reverts commit 800d19270250bb13cc6b2d330199815bf8e96446.
Remove unnecessary range limiting of persistmap
Skip calculation of filler, mountain, ridge, heat and humidity perlinmaps in underground mapchunks
Skip generateRidgeTerrain in underground mapchunks
Caves check for biome nodes, only excavate stone under water level
Unease caves noises, use MT0.3 parameters
Blobgen after cavegen
Biomegen: remove 'is replaceable content' bool
Clean up nearby code a bit
As a small side effect, it is now possible to add a background texture
to the chat console by simply providing background_chat.jpg, it is no
longer necessary to also add "console_color =" to minetest.conf.
Change must_reflow to a deque
Add overload for MapBlock::raiseModified that takes a const char*. This is a speed improvement.
Comment out unused variable
Optimisations to block offset calculations
Set builtin formspecs to autoscale in order to get consistent formspec look and feel
Uncouple label positioning from font size (May break some formspecs but is required to allow manual font adjustment)
Copy only minetest_game to apk by default
Don't copy .git and .svn folders to apk
Fix bouncing asset copy scrollbar due to long filepaths
Reenable font scaling to fix broken menu on high dpi screens
Implement minetest loglevel to android loglevel mapping
Disable touch digging while moving around
The player dropping the node can either be themselves or another player (i.e. without this fix you can crash other people's clients)
Thanks CWz for reporting the issue
The cause of a single light source seemingly being lit without spread
was due to its creation in the +Y mapblock boundary layer during map
generation, which was ignored as the overtop. This overtop explicitly
needs to be omitted during sunlight propagation, however. To accomplish
this, Mapgen::calcLighting() was split into separate functions taking
separate parameters.
Additionally, do not diminish light too early during spread. This fixes the
output inconsistency between Map::updateLighting and Mapgen::calcLighting.
Use/add stone_surface_max_y to speed-optimise/guide dungeon generation
MgV7: Don't let mountain terrain chop dungeons at mapchunk borders
Make mountain terrain update stone_surface_max_y for caves in mountains
