GCC and CLang compilers fail to support full IEC559 compliance required for the test, when certain compiler flags are active. This patch implements a heuristic that checks for the most common flag in GCC and CLang, plues an extra check which GCC disables when it's not compliant, to hopefully catch most cases where it can't run.
Move star draw to before sun glow texture draw and before sun draw,
not currently essential but the logical order. Will be necessary if
a 'no far ground' option is added, to draw stars behind the sun.
```
[ 10%] Building CXX object src/CMakeFiles/minetest.dir/client/render/interlaced.cpp.o
cc1plus: warning: -Wabi won't warn about anything [-Wabi]
cc1plus: note: -Wabi warns about differences from the most up-to-date ABI, which is also used by default
cc1plus: note: use e.g. -Wabi=11 to warn about changes from GCC 7
```
Reported by GCC
```
minetest/src/server.cpp:996:42: warning: ‘peer_id’ may be used uninitialized in this function [-Wmaybe-uninitialized]
errorstream << "ProcessData: peer=" << peer_id << e.what() << std::endl;
```
At sunset:
Stars first appear slightly later, at the time the sun disappears over the horizon,
this fixes seeing dark stars in front of the sun horizon glow texture.
Stars reach full brightness slightly earlier at time 20000, not so excessively long
after sunset.
The above behaviour is also applied at sunrise, but of course, time-inverted.
In pitch fly mode, you fly to the exact direction you are pointing at, using the forward key. Other move directions are also pitched accordingly.
It allows smoother and more complex movements.
Can be enabled/disabled by L key by default (set keymap_pitchfly in minetest.conf)
script_get_backtrace() was leaving its return value on the stack, corrupting
subsequent lua operations for functions that did not immediately return.
This problem can specifically be observed in the case of multiple "groupcaps"
entries, each of which provides the legacy "maxwear" property. These cause a
backtrace and thus pollute the stack for the following lua_next() call.
* Adds Lua methods 'set_rotation()' and 'get_rotation'. Also changed some method names to be more clear. Instead of an f32 being sent over network for yaw, now a v3f is sent for rotation on xyz axes. Perserved Lua method set_yaw/setyaw so that old mods still work, other wise to set yaw they would need to switch to set_rotation(0, yaw, 0).
Use the CSM death formspec when CSM is enabled and use the engine death formspec when CSM is disabled.
Move the CSM death formspec code to a dedicated file.
Works by detecting a collision while moving forward and then
simulating a jump. If the simulated jump is more successful,
an artificial jump key press is injected in the client.
Includes setting and key change GUI element for enabling and
disabling this feature.
Use font size 14 for phones.
Use x_inches < 3.7 instead of < 3.5 for small phones.
Add a new category x_inches < 6 for larger phones.
Use HUD scaling 0.85 for larger phones.
Use desktop defaults for tablets.
Previously, each glass face used drawAutoLightedCuboid() to draw a
flat cuboid. This also disallowed backface culling, making the
backface culling inconsistent with 'glasslike'.
Use code from 'glasslike' to draw glass faces using drawQuad().
Remove long-unknown top/bottom textures feature:
Makes the code simpler and cleaner.
Never documented, long-unknown and not of much use.
Previously, 'time_brightness' never fell below the threshold so
night sky colours were not applied.
Increase the threshold value. But now also set it to a value less
sensitive to possible future small changes in 'time_brightness',
by setting it halfway between the 'time_brightness' values for
darkest night and first stage of dawn.
Create CPack WIX msi Installer for RUN_IN_PLACE=0 builds
Correct paths on Windows for RUN_IN_PLACE=0
Install only required font files
Games have their own components, and "minimal" is optional
Mods will now have to initialize the list/slot in order to define the default player hand.
They may use the inventory callbacks to prevent abuse of this list.
Improve codestyle.
Add clarifying comments.
Use 'movement_gravity' setting and physics override instead of hardcoded value.
Halve number of particles in final 'node dug' burst.
Avoid extremely small, near-invisible particles.
Increase velocity to increase number emerging from within a cubic node.
Previously, night clouds were almost indistinguishable from night sky,
especially since a recent commit that made night sky brighter.
They were lacking the beautiful luminosity caused by being lit by the
permanently-full moon.
When 'directional_colored_fog = false' allow the dawn/dusk cloud
brightness boost to apply through the night too.
Set an identical minimum cloud brightness for when
'directional_colored_fog = true'.
Damage flash is shortened from 0.98-1.27s to 0.25s-0.33s to reduce
player in-game blindness, especially useful for combat situations.
It is also visually more comfortable.
Camera hurt tilt is made slightly shorter to match in duration.
Both flash and camera tilt are now of similar length to a typical
damage sound, such as the one used by Minetest Game which is 0.27s.
The 3 effects become more synchronised and unified.
Previously dungeons > decorations > ores.
Decorations depend on the node they are placed on, and ore types are
increasingly able to place large continuous volumes of nodes, such as
strata. Decorations are increasingly being used underground.
The new order avoids a node being changed by ore generation after a
decoration has been placed on it.
The new order also avoids ores appearing in the walls of a dungeon if
the wall nodes match the local stone node.
Make tunnels wider and use the noise parameters of most other mapgens.
All other underground features are already identical to all other
non-mgv6 mapgens, this final change modernises and improves the tunnels.
Also, use a better distance calculation for 'collide with objects'.
Fixes the issue of a vehicle occasionally colliding with its own driver,
causing one of the velocity components to be set to zero.
Add 2 new mapgen flags to make river depth variation and humidity drop
with altitude independently optional, instead of both being enabled by
the 'humid rivers' flag.
Simplify and clarify related code by removing a low priority
optimisation regarding 't_heat'.
Remove unnecessary optimisation bools and use spflags directly instead.
Improve and fix documentation in settingtypes.txt.
A few minor code cleanups.
* Modernize lua read (part 2 & 3): C++ templating assurance
Implement the boolean reader
Implement the string reader
Also remove unused & unimplemented script_error_handler
Add a reader with default value
Some cave segments are outside the mapchunk.
Previously, biome was being calculated by a function that uses the noise
maps. Points outside the mapchunk resulted in incorrect noise map indexes
that were sometimes outside the noise map size, causing a crash.
Use either noise maps or point noise calculations depending on point
location.
When the noise value or fill_ratio >= 10.0 complete coverage is enabled.
This disables random placement to avoid redundant multiple placements
at one position. Instead, 1 decoration per surface node is placed by
looping across each division.
'10' was chosen as this is the fill_ratio that previously created
very near complete coverage. The complete coverage feature therefore
integrates smoothly when noise is used for variable decoration density.
'fill_ratio = 10' should be used by modders who want a decoration
placed on every surface node. Compared to before such a decoration
placement will be 10 times faster.
* Few code updates
* Do not show average RTT before timing out
* Fix unwanted integer division in RTTStatistics
* Fix float format, prettier jitter calculation
* Use +=, 0.1f -> 100.0f for stronger average updates
Previously, the biomemap was 'BIOME_NONE' for a mapchunk column if a
stone surface was not found in it, causing water surface decorations
and water surface dust to fail.
Store the biome ID of the biome calculated at a water surface and add
it to the biomemap if the biomemap is 'BIOME_NONE' for the mapchunk
column. The biome calculated at a stone surface still has priority
for the biomemap entry, as it should.
Edit an incorrect comment.
Revert commit 99143f494711034068685b6ee845ce19fa09d7d9 and commit
f4ca830abe1aa22875c99b31bf2ee56e26f83f05.
These commits caused biome dust to be applied even when there was no core
mapgen terrain in a mapchunk column. So the dust, which overgenerates,
then appeared on structures added by mods in 'on_generated', such as
floatlands, asteroids or above-surface realms.
Adding support for _NET_WM_PID as defined in Extended Window Manager Hints
Move verbose messaging to setupXorgTopLevelWindow method as Xorg messages should only occur when running in Xorg env.
Irrlicht returns the XDisplay as a void* and XWindow as an unsigned long so reinterpret those as the appropriate type. Also fixed a spaces for tab formating issue
Previously the only way to disable biomes was to 'clear' the registered
biomes in a mod, but this method causes large amounts of unnecessary
processing:
1. Calculation of 4 2D noises.
2. Looping through all nodes of a mapchunk replacing nodes with identical
nodes.
The new flag disables those operations.
'generateBiomes()' constructs the biomemap as it generates biomes.
The biome calculated at first stone surface encountered is added to
the biomemap.
Previously, if no stone surface was encountered in a mapchunk column
the biomemap was left empty for that (x, z) position, causing biome
dust and water surface decoration placement to fail.
If at the base of a mapchunk column the biomemap is empty, add the
currently active biome to the biomemap, or if biome is NULL calculate
it for this position and add it to the biomemap.
In some configurations, such as when using the runit supervisor and its
tool chpst, the HOME variable might be unset. This resulted in an
unclear error message that was hard to pin down.
Fix 3 warnings reported by GCC 8.1 of the following type
```src/client/gameui.cpp:191:43: warning: « void* memset(void*, int, size_t) » effacement d'un objet du type non trivial « struct GameUI::Flags »; use assignment or value-initialization instead [-Wclass-memaccess]
memset(&m_flags, 0, sizeof(GameUI::Flags));
```
```
src/translation.cpp:43:16: warning: interception du type polymorphique « class std::out_of_range » par valeur [-Wcatch-value=]
} catch (std::out_of_range) {
```·
Because vein ore uses 3D noise (all the other ores use 2D noise) the
perlinmap Y size can be different in different mapchunks when close
to the ore Y limits.
Previously this caused bugs in the vein structure because changes in
perlinmap Y size did not recreate the noise objects.
Delete and recreate the noise objects with the new Y size if Y size
has changed.
Previously, the centering caused by the 'place center x/z' flags did
not take rotation into account. So schematics with unequal X and Z
dimensions were incorrectly placed. The bug was hidden for schematics
equal in X and Z dimensions.
* g_extrusion_mesh_cache new() and grab() to be managed in constuctor only (#7235 partial)
This global was getting grab()-ed by each call to getItemMesh, incrementing its reference count. What was to be the final drop() in the destructor ended up with > 0 reference count, so memory not freed by Irrlicht.
Previously, caverns confused tunnel generation causing biome top and filler
nodes to appear in caverns.
Split 'generateCaves()' into 2 functions to separate tunnel and large
randomwalk cave generation.
In each mapgen re-order cave generation to generate tunnels before caverns.
Split some long lines.
Edit comments.
Remove unnecessary comments and unnecessary commented-out code.
Use std::fmax/fmin instead of MYMAX/MYMIN.
Remove scope-limiting braces.
Consistently define literals as floats, except in noise parameters.
Cleanup literals in noise parameters.
Remove unnecessary 'near_cavern' line.
Reduce max spawn y to be consistent with other mapgens.
Caverns first appeared in mgvalleys and were later added to other
mapgens as shared code. Now this shared code can replace mgvalley's
internal cavern code.
Also use shared tunnel code instead of internal code.
Changes to mapgen that will affect existing worlds (mgvalleys is not
stable):
Single lava and water sources not added in tunnels.
Previous caverns are unchanged but an equal number of new ones are
added at a distance from the previous.
From y = -256 to 192 nodes below, where the caverns taper at their
upper limit, they will have a slightly different shape as the taper
is now linear.
Instead of calling g_settings->getBool("flag") multiple times
during each movement step, the current settings are cached
in a new player object member. Updated via registered callbacks.
* Android: Add zoom, minimap, and toggle chat button
Zoom button is put above jump button.
Minimap and toggle chat button are put in settings bar.
* Jump button is rotated down button
* Move three buttons on the right screen higher
Fix elusive 5 year old bug that caused mgvalleys large caves to be flat and
limited to mapchunk borders.
Error was fixed 2 years ago in 'CavesV6' but not in 'CavesRandomWalk'.
In the client, raise lower limit from 30 to 45 degrees, to avoid server
seeing this as a zoom and loading world beyond the server-set limit.
Add minimum in settingtypes.txt and enforce lower limit when set using
minetest.conf.
In the server, distrust the client-sent FOV if below the heuristic zoom
threshold and use the player object property 'zoom_fov' to check it, to
protect against hacked clients.
* Android: Replace movement buttons with joystick
Replace movement control buttons (arrows at bottom left screen) with virtual joystick.
Joystick has 8 directions (same as keyboard). Basically, just map it to keyboard input.
Joystick applies only on left 1/3 of screen.
Joystick's position can be fixed by enabling fixed_virtual_joystick setting.
Three new images:
(1) placeholder joystick,
(2) joystick container (background), and
(3) joystick cursor.
Remove unused images: movement control buttons (*_arrow.png).
New data type: touch_gui_joystick_move_id
Joystick's fixed position is spaced one button size from bottom and from left of screen.
Remove unused variable: m_joystick_downlocation
Fix for incorrect translation of empty strings
In the key change menu, when a button key not have name an empty string is passed to gettext.
The empty string is reserved for gettext to return de header of the .po file an this is shoved in the button
Commit 5070ca2111dd5b3f333a942059ef2c592de8dc24 changed sun colour by
fixing what seemed to be a code mistake.
Return to the standard colour but comment-out the first assignment of the
double-assignment for performance.
Add a comment to explain.
Add new biome fields 'node_dungeon', 'node_dungeon_alt', 'node_dungeon_stair'.
If 'node_dungeon' is not defined dungeons fall back to classic behaviour.
Remove messy and imprecise dungeon material code from 'generateBiomes()'.
Code deciding dungeon materials is now in 'generateDungeons()' and uses the
biome at mapchunk centre for more precision.
Remove hardcoded 'MG_STONE' types as long intended.
* Promote performance-type-promotion-in-math-fn as a coding error
* Promote performance-faster-string-find too (which is not problematic currently)
* Same for performance-implicit-cast-in-loop
* Fix remaining tidy points
* src/sky.cpp 146 warn V519 The 'suncolor_f.r' variable is assigned values twice successively. Perhaps this is a mistake. Check lines: 142, 146.
* src/sky.cpp 147 warn V519 The 'suncolor_f.g' variable is assigned values twice successively. Perhaps this is a mistake. Check lines: 143, 147.
* src/sky.cpp 148 warn V519 The 'suncolor_f.b' variable is assigned values twice successively. Perhaps this is a mistake. Check lines: 144, 148.
* src/threading/thread.cpp 63 err V730 Not all members of a class are initialized inside the constructor. Consider inspecting: m_thread_obj.
* src/server.cpp 3243 err V595 The 'log' pointer was utilized before it was verified against nullptr. Check lines: 3243, 3258.
* Use constexpr + unroll some calculations to cache definitively some calculations
* Unroll some calls in collision code & use a constref instead of a copy in one occurence
* Fix many issues reported by clang-tidy
We have many issues in code related to some performance to float <-> double.
Clang-tidy reported it in performance-type-promotion-in-math-fn
I fixed many of them. It's not ready for a promote to blocking
Also fix some value which should be const-ref
* Implement new travis clang-tidy build step
* This step enable some rules and enforce one rule as error
* This permits to have some C++ quality rules based on clang & clang contributor guidelines
* Fix clang-tidy reported problems on push_back -> emplace_back
* Drop EventManager from GameDef & do some client cleanups
* EventManager is only used by Client. Don't expose it on Server & GameDef for nothing
* Drop Client::event() in favor of direct calls to getEventManager
* Cleanup some event put from new + put to put(new)
* MtEvent: add Type(u8) enum
* This will enhance event performance & ensure stricter type
* Drop MtEvent::checkIs (unused)
* clang-tidy reported fixes
* Code style
* Move event_manager.h to the client directory as it's only used by client
Add EventManager unittests + switch to unordered_map as order is not important here
Drop a unused function
minetest/src/script/cpp_api/s_player.h:27:1: warning: struct 'PlayerHPChangeReason' was previously declared as a class [-Wmismatched-tags]
struct PlayerHPChangeReason;
* Cleanup sound manager client
* Use some const refs
* Use auto on iterators
* Drop unused parameters
* Move sound_openal.* to client folder
* Move sound.cpp + OnDemandSoundFetcher to client/ folder + reorganize includes properly
* Server: delegate mod management & config to ServerModConfiguration (rename it to ServerModManager)
* Use c++11 range based loops
* Add unittests + experimental/default mod as a test case to permit testing mod loading in future tests
* isFreeServerActiveObjectId is now part of ServerEnvironment
* getFreeServerActiveObjectId is now part of ServerEnvironment
* StaticObject constructor now take ServerActiveObject instead of type + string. This permits to remove a big string copy in some code parts
* ObjectRef::set_local_animation: fix wrong lua return (should push a boolean, currently returns nil)
* ObjectRef::set_eye_offset: fix wrong lua return (should push a boolean, currently returns nil)
* Fix various Server functions which depends on RemotePlayer objet and return true/false when player object is nil whereas it's a caller implementation error. Change those bool functions to void and add sanitize_check call instead. Current callers are always checking player object validity
* Optimize Server::setClouds : use CloudParams object ref instead of attribute deserialization from structure & perform RemotePlayer::setCloudParams directly in server class like many other calls
* Optimize Server::SendCloudParams: use CloudParams object ref instead of deserialized attributes
Use the --color command line parameter instead of a setting for coloured logs
This fixes the missing warningstream bug, g_settings->get mustn't be used there.
Also, the decision about en- or disabling log colours fits better to the command line parameters than minetest settings.
Change to --worldlist instead of --world list.
Gets rid of --worldpath parameter added as part of this pull request,
instead moving the listing function to a command --worldlist that
accepts either name, path, or both and prints out the corresponding
information.
Returns the decoration ID for the provided decoration name string.
For use with gennotify, to know the decoration IDs for use in
'minetest.set_gen_notify'.
This doesn't check the fields in anyway whatsoever so it should only be seen as a way to mitigate exploits, a last line of defense to make it harder to exploit bugs in mods, not as a reason to not do all the usually checks.
Previously only 'mapgen water source' and 'mapgen river water source'
were checked for. Games can use multiple liquid nodes defined for biomes,
many of which will not be aliased to those 2 mapgen aliases, causing
floating dungeons to generate in some liquids.
Now we check for liquid drawtype instead, so can remove liquid nodes
from dungeonparams.
Also check for 'airlike' drawtype instead of 'CONTENT_AIR' to avoid
generation in 'airlike' nodes in some rare situations. This will also be
needed for when we add definable biome air nodes.
* Rename IWritableNodeDefManager to NodeDefManager
* Make INodeDefManager functions const
* Use "const *NodeDefManager" instead of "*INodeDefManager"
* Remove unused INodeDefManager class
* Merge NodeDefManager and CNodeDefManager
* Document NodeDefManager
* Add minetest.bulk_set_node call + experimental mod unittest
* Optimize set_node function to prevent triple lookup on contentfeatures
Do only one lookup for old, and try to merge old and new lookup if node is same than previous node
* Add benchmark function + optimize vector population to have real results
The CSM HUD PR caused some strange behavior including aborts due to parts of it using some slightly hacky code, the event refactor changing how events are processed and a minor oversight.
* Make InputHandler own the key cache
* Add a helper function InputHandler::cancelPressed to avoid multiple similar calls in game.cpp
* Move RandomInputHandler::step definition into cpp file
Joystick input is a RealInputHandler only usage, make it intelligent and handle the joystick with keyboard direct.
This permits to remove many getters in game which should be owned by RealInputHandler
* Attempt to add registration confirmation
Using SRP auth mechanism, if server sent AUTH_MECHANISM_FIRST_SRP that means the player isn't exist.
Also tell player about the server and chosen username.
Local game has localhost as IP address of the server.
Add RenderingEngine::draw_menu_scene() to draw GUI and clouds background.
aborted -> connection_aborted
* Rewrite information message text
Client::promptConfirmRegister() -> Client::promptConfirmRegistration()
Other enhancements:
* Simplify setStatusText to showStatusText, as it shows the label too (preventing almost every setStatusText to call setStatusTextTime(0)
* Add unittests
Game class is too huge and has too specialization on various subjects, like UI, formspecs, client, renderer. Start to move UI related things to GameUI object and cleanup them
Other improvements:
* updateChat: more performance on error messages by remove string copies
* Initialize all game class members in definition instead of constructor (with nullptr instead of NULL)
* Drop unused Client::show{GameChat,GameHud,Profiler,GameFog}
* Add GameUI unittests
* [CSM] Don't load the IO library.
* Rename the function to match the Lua API function name and add a missing `const`
* Add a comment to explain some strange code and fix the other issues pointed out by shadowninja.
The `disconnected_*` boxes are the opposites of the `connect_*` ones,
i.e. when a node has no suitable neighbours on the respective side, the
according disconnected box is drawn.
* disconnected_top
* disconnected_bottom
* disconnected_front
* disconnected_left
* disconnected_back
* disconnected_right
* disconnected (when there is *no* neighbour)
* disconnected_sides (when there are *no* neighbours to the sides)
Fixes#6676.
Allow animated meshes to be cached in Irrlicht's builtin mesh cache.
Use Material.EmmissiveColor instead of manipulating the mesh' vertex colors.
Remove player object property 'can zoom'.
Add player object property 'zoom fov'.
Remove clientside setting for 'zoom fov'.
Object property default is 15 degrees in creative mode, zoom disabled
in survival mode.
Needed due to zoom now loading and/or generating distant world
according to zoom FOV.
Update object properties serialisation version to 3.
See #6667
By setting active_object_send_range_blocks > active_block_range a server admin
can allow clients to retrieve active objects futher out from the player at
relatively low cost to the server
(only objects in the players' view cone are considered).
Solves some issues with ModStorage functionality in mapgen threads
that occurred when mapgen threads continued to run after the main
server thread had stopped. Also shuts down mapgen threads before
shutdown callbacks are called.
Allowing scrolling with the mousewheel when the vertical scrollbar is
hidden, unnecessarily exposes oversized containers and newlines at the
end of the text. For example try scrolling over the textareas in the
pause menu. This PR addresses the issue by requiring the scrollbar to be
visible before allowing the scrolling with the mousewheel.
No longer decide placement on 'buildable_to' parameter.
Dust nodes only look acceptable placed on cubic nodes.
Modders may not want to make their plantlike decorations 'buildable_to'.
We try to use default fallback for both mono and main font when custom font path is not exist. This way, if Minetest is not corrupted, we could avoid crash.
Add "all_floors" and "all_ceilings" flags for simple and schematic
decorations. Decorations are placed on all floor and/or ceiling surfaces.
Decorations are placed before dungeon generation so placement in dungeons
is not possible.
Add 'getSurfaces()' function to mapgen.cpp that returns 2 arrays of y
coordinates for all floor and ceiling surfaces in a specified node column.
Move 'getHeight()' checks into DecoSimple and DecoSchematic. Delete
'getHeight()' functions.
This causes blocks in front of the player to be rendered sooner and
blocks in the periphal view (that would soon be out of view) a bit later.
Overall this leads to smoother rendering as the player is moving around.
Formspec input for each individual noise parameter and flag.
Allow noise flags to be set in advanced settings, previously only settable
in minetest.conf.
Standardise 'group format' for noise parameters set in minetest.conf, as
only these support noise flags. However the older 'single line' format is
still accepted to support existing minetest.conf files.
Therefore auto-generate minetest.conf.example with noise parameters in
'group format'.
Setting 'type' in settingtypes.txt is now either 'noise_params_2D' or
'noise_params_3D', the dimension number is displayed in the advanced
settings edit page.
This helps retrieving the right set of blocks when the player is falling,
traveling on cart, or in general traveling in a direction different from
the view direction.
Necessary for placing the base cube of 'plantlike_rooted' drawtype in the
seabed instead of on it.
Useful for placing decorations sunk into, or buried in, the ground.
For solid nodes, the lighting at a corner becomes face-dependent, which
means that only the four nodes in face-direction contribute to the
lighting (getSmoothLightSolid).
For special nodes, which use the lighting values at the eight corners of
a node, the lighting is not face-dependent, but certain nodes of the
eight surrounding nodes of a corner (here indices 4, 5, 6 and 7) can be
obstructed.
Ambient occlusion now also occurs for solid nodes, if two, three or four
of the four nodes in face-direction are solid.
In some cases NetworkPacket was created using default constructor and m_data is not properly sized.
This fixed out of bounds memory copy
Also use memcpy instead of std::vector affectation to enhance packet creation
If 'param2_max' is not used, parameter 'param2' works as before for
compatibility.
If 'param2_max' is used, 'param2' and 'param2_max' become the lower
and upper bounds of a per-decoration random param2.
Increase scrollrate depending on fontsize
Scroll on mousewheel
Allow scrolling and marking text on non writable textareas
Update lua api about readonly mode
Show scrollbar if text overflows
If either of the 2 noise parameters are omitted the ore will occur from y_min
to y_max in a simple horizontal stratum. As this does not compute noise
performance improves, and is ideal for placing many layers.
Clean up some nearby ore documentation.
* Make Player::peer_id server-side only and add getters and setters
Player::peer_id has no sense client side, move it to server, make it private and add setter and getter
Also add some PEER_ID_INEXISTENT instead of harcoded 0
* Add no_static_save property to luaentites to not save them statically.
This allows for temporary objects that would get deleted anyway as soon as they are loaded again without the static saving overhead.
* Use positive meaning for static_save object property
* Invert meaning also for the LUA parameter
Note: getboolfield() does not change &result when field does not exist, so it defaults to the default value in the header file, which is 'true'.
* Extend push_object_properties()
* Add session_t typedef + remove unused functions
u16 peer_id is used everywhere, to be more consistent and permit some evolutions on this type in the future (i'm working on a PoC), uniformize u16 peer_id to SessionId peer_id
* Update JsonCPP to 1.8.3
* Fix deprecated functions
Json::FastWriter, Json::StyledWriter and Json::Reader are marked deprecated since 1.1 and are deprecated in 0.8 but not shown at compilation time.
Use new methods to serialize/deserialize
Implement network communication for channels
* Implement ModChannel manager server side to route incoming messages from clients to other clients
* Add signal handler switch on client & ModChannelMgr on client to handle channels
* Add Lua API bindings + client packet sending + unittests
* Implement server message sending
* Add callback from received message handler to Lua API using registration method
Change OpenAL distance model from AL_INVERSE_DISTANCE to
AL_INVERSE_DISTANCE_CLAMPED to avoid excessive volume when very close
to the sound location, for example MTG doors, and MTG fire sounds which
are combined at an average position and often located in air nodes.
Because AL_REFERENCE_DISTANCE has been reduced to 1 node (the distance
under which gain is clamped), multiply volume by the same factor to keep
sound gains the same as before, since the gain is calculated as:
gain = (AL_REFERENCE_DISTANCE / distance)
Feature is unnecessary and would greatly complicate future development,
it would also make 'get biome at pos' extremely complex.
Mgv7: Revert option to repeat surface biomes in floatlands, which
depended on the above.
Error was exposed by commit a1389c38658fe69c3bd25c3099bae9a4e51ed401
'nplaced' was not set to U16_MAX when biome 'stone' was placed, so when
biome was recalculated in a column of stone, the 'nplaced' value
caused a few remaining filler nodes to be placed.
Occurs when the lower biome has a deeper depth of 'top' plus 'filler'
than the upper biome.
For 3D noise tunnels only, replace unsupported biome 'top' and 'filler'
nodes in tunnel roof with the defined biome 'stone'.
This makes terrain created by 3D noise tunnels consistent with the rest
of mapgen, which does exactly the same in this situation.
The 'glow' value is added to the ambient light value.
Negative 'glow' disables light's effect on object colour, for faking
self-lighting, UI-style entities, or programmatic colouring in mods.
Dig prediction allows clients to remove dug nodes without
waiting for server acknowledgement.
This patch allows mods to override dig prediction,
it can either be turned off or a different "prediction node"
can be selected.
For precise control of schematic vertical position relative to the
'place_on' node.
Avoids workarounds that add empty nodes to a schematic and therefore
reduce performance.
Also remove long-unused decoration cutoff code.
* Implement minetest.register_on_userlimit_check
This new callback permits to bypass the max_users parameter with new mods condition, based on player name or IP
Only one mod needs to permit it.
Move core part for builtin privileges checks to builtin
Creates a single undulating ore stratum that is continuous across mapchunk
borders and horizontally spans the world.
Due to being continuous is ideal for creating bands of alternative stone
type running through cliffs and mountains, or underground layers.
Add missing documentation of 'ore_param2' parameter.
* Fix animation frame_speed and blend loosing precision due to incorrect data type
Add lua function set_animation_frame_speed to update the frame speed without resetting the animation to start
* Fix HP transport + some double <-> float problems
TOCLIENT_HP transport u16 hp as a u8, use u16 HP, this prevent HP over 255 to overflow across network
* Fix more double/float problem in serverpackethandler & remove implicit struct type for TileAnimationParams
* Fix connection unittests container
* Formspec: Add options to set background color and opacity (fullscreen mode)
* Enhance previous comment: Set formspec background when regenerate UI.
* This permit to do the calcul only at regen and override it with bgcolor tag
* Add a setting for default background color into formspec, separated from fullscreen
* Add a little performance gain on formspecs using a const ref instead of copying formspec string
* Refactor clientevent structure
* Move structure outside of client header
* Create client events on heap not stack, this remove the ClientEvent object copy
* Use clientEventHandler to route events
* Alternative code for slipping
- does not depend on frame rate
- controllable via environment variables for now
* Adjust slipping speed for item entities too.
* Final version of framerate-independent slippery code
* Remove dead code and fix formatting
* getStandingNodePos should only look 0.05 nodes downwards
This ensures that, even if the player is standing on a partially
filled node, this node is used as the standing node and not the
node below it.
Specific use: enables slippery slabs
* Exchange global getStandingPosNode change for local inline change
Reverts previous commit
* Revert the item movement changes
* Slippery nodes now slip over cliffs and edges
Players no longer suddenly stop before falling off.
Also refactored slippery code into getSlipFactor method.
* Slipping over an edge gated by player's is_slipping state
A new flag for just this case, to reduce costly node lookups in
the normal case of leaning over a non-slippery edge.
Public access for consistency and potential future uses.
* Minor code tweaks / cosmetics
* Add temp variable to improve readability and fix indentation issues
* Move Connection threads to dedicated files + various cleanups
* ConnectionReceiveThread::processPacket now uses function pointer table to route MT packet types
* Various code style fixes
* Code style with clang-format
* Various SharedBuffer copy removal
* SharedBuffer cannot be copied anymore using Buffer
* Fix many SharedBuffer copy (thanks to delete operator)
* Setting: Safe digging and placing
* New setting 'safe_dig_and_place' under Controls
* If set, digging and placing will not auto-repeat
* Releasing buttons unblocks the respective action again
* Useful for inexperienced users in creative mode where default
repeat times may be too short
* Safe placing (right click repetition) does not need a guarding flag
* Added new setting to minetest.conf.example
* Cleanup network headers
* Move peerhandler to a specific header to reduce compilation times
* Move socket.cpp/h to network folder
* More work
* Network code cleanups
* Move socket.{cpp,h} to network folder
* Move Address object to network/address.{cpp,h}
* Move network exceptions to network/networkexceptions.h
* Client: use unique_ptr for Connection
* Server/ClientIface: use shared_ptr for Connection
* Format fixes
* Remove socket.cpp socket.h from clang-format whitelist
* Also fix NetworkPacket code style & make it under clang-format
* Respect object property hp_max field for players
This allows modders to configure the maximal HP per player
* Statbars: Downscale bar to full 20 HP when exceeding this value
Add default max HP for players and breath constants to builtin
Document the constants
* Rename PLAYER_MAX_HP -> PLAYER_MAX_HP_DEFAULT
the BS constant
implicitly promotes all position calculations it is used in to double even
though positions (= v3f) are only meant to be floats.
There are many, many similar occurrences everywhere, but I'm not willing to
hunt down all; I only fixed the little part I'm already familiar with.
* Modernize source code: last par
* Use empty when needed
* Use emplace_back instead of push_back when needed
* For range-based loops
* Initializers fixes
* constructors, destructors default
* c++ C stl includes
* Code modernization: subfolders
Modernize various code on subfolders client, network, script, threading, unittests, util
* empty function
* default constructor/destructor
* for range-based loops
* use emplace_back instead of push_back
* C++ STL header style
* Make connection.cpp readable in a pointed place + typo
* remove sector meta loading/saving from files which targets dead code (differs_from_disk is always empty)
* this remove empty ServerMapSector and ClientMapSector, remove MapSector childs
* empty function
* default constructor/destructor
* for range-based loops
* use emplace_back instead of push_back
* remove some unused headers in some cpp variable
* empty function
* default constructor/destructor
* remove unused Map::emergeSector(a,b)
* for range-based loops
* migrate a dirs[7] table to direction tables
* remove various old unused function
* Modernize various files (src/m*)
* range-based for loops
* code style
* C++ headers instead of C headers
* Default operators
* empty function
Thanks to clang-tidy
* server.cpp: unroll setting when sending mapblocks
* Improve a little bit performance when sending mapblocks massively
* Use a range based for
* Code style fixes
* clientobject, clouds, collision, clientsimpleobject: code modernization
* use range-based for loops
* simplify some tests
* various code style fixes
* use emplace_back instead of push_back when necessary
* use auto on some iterators
* use default operator when needed
* unroll v3s16 creation on collisionMoveSimple
Minetest performance improvement has been huge since months, server step reduction will permit to handle client events a little bit faster without too many penalty costs due to core engine
* use range-based for loops
* simplify some tests
* various code style fixes
* remove debugprint in ClientMap::getBackgroundBrightness, debug code was not intended to be there
* remove unused fields in MapDrawControl
* use emplace_back instead of push_back when necessary
* ClientInterface: add a function to verify (correctly) if user limit was reached
CS_HelloSent is a better indicator of active slots than CS_Created, which are session objects created after init packet reception
Switch existing checks to ClientInterface::isUserLimitReached()
Use range-based for loop for getClientIds() used function too
This will fix#6254 (not the memory overhead if init is flooded)
* Various code style fixes
* Use range based for loops
* Use empty instead of empty objects
* Use C++11 default keyword for trivial constructors and destructors
* Drop some useless casts
* Use emplace_back instead of push_back to improve performance of some vectors push
* Use more for range based loops
* Simplify some tests
* Code style fixes
* connection.h: better PeerChange constructor instead of creating uninitalized object and then affect variables
* Use various modern for loops
* Make some loop iterator constants, whereas there weren't
* Use empty on some size() > 0 tests
* Various little codestyle fixes
* Fix an hidden scope variable in Server::SendBlockNoLock
* Use Environment interface instead of ClientEnvironemnt
* Don't create slippery variable and then re-affect it
* itemgroup_get return a int, properly test != 0 to be clearer
Use various ranged-based for loops in ServerEnvironment::step
Also set ServerObject::getBasePosition const to be compliant
ServerEnvironment::deleteParticleSpawner: use a const iterator
When minetest is launched, if there was no nameprovided in
configuration or parameters, the game would not show any error in
console. if the --go parameter was also prowided, the game would
exit without an error. This is undesired behavior, so this merged
commit add the missing function that displays the missing error
message in console.
Gives starting singleplayer games this subtle "dawn of a new world" feel.
I would have set it even earlier (up to 4:45am), but I was worried that in
some pre-existing games the player could be overwhelmed by hostile
mobs right at the start, seriously changing gameplay.
It's just the default, individual games should be able to override it, and
for public servers it's irrelevant anyway, because only the first player to
set foot in the world will notice, and that's usually the server admin.
Another small general problem: the player is always standing exactly on the
bondary between 2 nodes e.g. Y=1.5 is exactly between nodes Y=1 and Y=2.
floatToInt() and myround() will round +/-n.5 always 'outwards' to +/-(n+1),
which means they behave differently depending on where you are: they round
upwards above sea level and downwards when underground. This inconsistency
comes from the way the coordinates are calculated, independent of the
specific C++ code.
The result is a tiny bit of lost performance when moving underground,
because 1 node level more than necessary is checked for collisions. This can
be amended by adding a tiny offset to minpos_f.Y, like @paramat suggested.
This is not an elegant solution, but still better than wasting CPU.
To determine the area (nodes) where a player movement took place
collisionMoveSimple() first took the old/new player coordinates and rounded
them to integers, then added the player character's collision box and
implicitely rounded the result. This has 2 problems:
Rounding the position and the box seperately, then adding the resulting
integers means you get twice the rounding error. And implicit rounding
always rounds towards 0.0, unlike floatToInt(), which rounds towards the
closest integer.
Previous (simplified) behavior: round(pos)+(int)box, for example player at
Y=0.9, body is 1.75m high: round(0.9)+(int)1.75 = 1+1 = 2.
==> A character's height of 1.75m always got rounded down to 1m, its width
of +/-0.3 even became 0.
Fixed by adding the floats first, then rounding properly: round(pos+box) =
round(0.9+1.75) = round(2.65) = 3.
Construct dungeons from the node defined as biome 'node_stone' if
'mapgen_stone', 'mapgen_desert_stone' and 'mapgen_sandstone' are not
detected.
Feature long-intended by kwolekr/hmmmm and present in code as a TODO.
Move point at which light is sampled up to 0.5 nodes above foot level,
to avoid that point sometimes passing into the node below causing the
model to go dark.
The getBackgroundBrightness() function detects darkness in the view direction
to decide when to make the skybox dark. The volume checked was too narrow and
missed the left and right edges of the view, too easily causing a dark skybox.
Widen the checked volume to match a FOV of 72 degrees and a 16:9 aspect ratio
game window.
Remove usage of the SharedBuffer in zlib compression which has two problems:
* We copied the whole memory block to compress it (not good with mapblocks)
* We copied sometimes strings to SharedBuffer to SharedBuffer (2nd time)
Use this method in MapNode::serializeBulk + optimize serialization but merging 3 identical loops in a single loop
correctBlockNodeIds does 2 lookups for each loaded node, one to translate DB ID to name and a second to translate name to real ID. Name to real ID is very consumming if done on every node. As mapblocks are in most cases composed of many identical adjacent nodes, cache previous source and destination id and use them on the next node to prevent any lookup on those maps.
This reduce the function load from 15% of my CPU usage to ~0.7%, on the test, calls was reduced from 2.5M lookups to 42k lookups, it's a huge performance gain
* TileLayer: use shared_ptr for vector framespec
This reduce memory copy of TileLayer from (4 to 16) * FrameSpec where FrameSpec = (sizeof(int) + 3 * sizeof(ptr)) to int + sizeof(ptr)
Callgrind difference
Before: https://lut.im/RGkiJqQb8T/LeQIEXpAuRzfl7gd.png
After: https://lut.im/bcqmwee1xu/cTwtptY5tRuS9lp0.png
* Fix one push_back to use vector::emplace_back & optimize inclusions
* VoxelManip cleanups (const ref, const move) permitting to improve a little bit performance
* VoxelArea: precalculate extent (performance enhancement)
This permits to reduce extend high cost to zero and drop many v3s16 object creation/removal to calculate extent
It rebalance the client thread update to updateFastFaceRow instead of MapBlockMesh generation
This will also benefits to mapgen
Allows setting of the mountain 'zero level' (y where density gradient is zero).
It is easy to vertically shift smooth terrain by editing noise parameter 'offset',
but vertically shifting mountain terrain was complex and imprecise, involving
making a calculation based on an average of the mountain height parameter.
Ensure in-cloud fog is always stronger than outside-of-cloud-fog even when
using a small view range.
Also limit in-cloud fog range to a maximum of 32 nodes to keep it fairly
strong when using a large view range.
The change from 800x600 to 1024x576 (16:9) was a reduction in height which caused
user interface to become smaller.
Continue to use width 1024 as it is a common small screen width.
* [CSM] Add flavour limits controlled by server
Server send flavour limits to client permitting to disable or limit some Lua calls
* Add limits for reading nodedefs and itemdefs
* flavour: Add lookup node limits
* Merge get_node_or_nil into get_node.
Sending fake node doesn't make sense in CSM, just return nil if node is not available for any reason
* Add node range customization when noderange flavour is enabled (default 8 nodes)
* Limit nodes range & disable chat message sending by default
* Bump protocol version
Spawn player 1 node higher to avoid spawning waist-deep in a possible
biome 'dust' node, such as tundra snowblock.
Tune default offset to spawn players in a more interesting location on the
mandelbrot sets, on a raised area that looks like a spawn platform.
Tune julia parameters to help avoid spawn search failing, especially for
fractal 6.
For consistency return to 'FPS =', add comma before FPS.
Remove 'R' from 'range_all' as may be re-keymapped.
Remove inconsistent brackets from 'range_all'.
Change 'v_range' to 'view_range'.
Add 'pos = ' before co-ordinates.
Add spaces around '=' in yaw display.
Remove brackets from around 'yaw' and 'seed'.
Move 'pointing_at' to 3rd line.
Remove 'param1' (0 for all solid nodes and unreadable for light sources due to
light bank encoding).
Remove file name of pointed node top tile (this also removes the need to get
ContentFeatures for the node, slightly improving performance).
Replace quotes around node data with brackets, looks better and more consistent.
Add 'guitext3' for third line.
Use 'setVisible' for all 3 lines to control the setting of each text rectangle.
Improve logic of 3rd line to only run code it needs to depending on whether
pointing data is avaialble and whether node is not 'ignore' and not 'unknown'.
* New TOCLIENT_CHAT_MESSAGE packet
* Rename old packet to TOCLIENT_CHAT_MESSAGE_OLD for compat
* Handle TOCLIENT_CHAT_MESSAGE new structure client side
* Client chat queue should use a specific object
* SendChatMessage: use the right packet depending on protocol version (not complete yet)
* Add chatmessage(type) objects and handle them client side (partially)
* Use ChatMessage instead of std::wstring server side
* Update with timestamp support
Fix taking damage caused by sneaking over a nodebox gap.
Fix strange behaviour on stair nodeboxes.
Enable jumping from node edges while sneaking.
Enable movement around corners while sneaking on a 1-node-high groove in a wall.
Add 'biome_zero_level' argument to 'generateBiomes()', 'deco_zero_level'
argument to 'placeAllDecos()' and 'ore_zero_level' to 'placeAllOres()'
to allow mapgens to vertically shift the registered biomes, decorations
and ores per-mapchunk.
Will also allow many realm possibilities in future mapgens.
Useful for underwater plants.
Node consists of a base cube plus a plantlike extension that can pass through
liquid nodes above without creating air bubbles or interfering with liquid flow.
Uses paramtype2 'leveled', param2 defines height of plantlike extension.
This commit introduces Raycast, a Lua user object, which can be
used to perform a raycast on the map. The ray is continuable, so one can
also get hidden nodes (for example to see trough glass).
Fixes issue #3576
* Clouds now take camera position as 3D, not 2D
* Cloud grid filling extracted to gridFilled method
* Clouds detect whether camera is inside cloud
* Camera in cloud changes fog by overriding sky colors
with cloud color
* Sun, moon and stars can be temporarily disabled
with setBodiesVisible
* Disabling fog also disables all "inside cloud" behaviors
Allow `core.copy_dir` (main menu API) to copy directories from a
non-Minetest location. The check to disallow copying to non-Minetest
locations is retained.
* Irrlicht cleanup: cleanup various object to use RenderingEngine
* CAO doesn't need scenemanager in addToScene
* Camera doesn't need VideoDriver pointer or SceneManager in constructor
* Hud doesn't need driver & scene manager in constructor
* Hud doesn't need scenemanager pointer
* Tile.h doesn't need IrrlichtDevice header (just SMaterial)
* WieldMeshSceneNode: only take scene, we always use scene root node as parent
* Load client-side mods into memory before executing them.
This removes the remaining filesystem access that client-sided mods had and it will hopefully make then more secure.
* Lua Virtual filesystem: don't load the files into memory just scan the filenames into memory.
* Fix the issues with backtrace
* fix most of the issues
* fix code style.
* add a comment
Commit cad10ce3b747b721fd63784915e05f12bc488128 altered the parameter
'float_mount_height' but was missing the necessary line in the constructor
to get the altered value from 'params'.
Fixes 3D floatland terrain generating everywhere.
* MSVC: Fix '/std:c++11' is not a valid compiler option
* MSVC/MINGW: Define 'WIN32_LEAN_AND_MEAN' for the whole project
In some obscure cases 'Windows.h" got includet before that definition, which leaded to compilation warnings+errors
* MSVC: '/arch:SSE' is only available for x86
* MSVC: Fix float conversation
* MSVC/MINGW: use winthreads on Windows
* MSVC: 'USE_CMAKE_CONFIG' might be already definied by CMake build system
* MSVC: Use all available cpu cores for compiling
* Add missing include ctime and use std::time_t
* Add Device3D class which will contain IrrlichtDevice interface
move getSupportedVideoDrivers to Device3D
Add Device3D singleton & use it in various places
Rename Device3D to Rendering engine & add helper functions to various device pointers
More singleton work
RenderingEngine owns draw_load_screen
move draw functions to RenderingEngine
Reduce IrrlichtDevice exposure and guienvironment
RenderingEngine: Expose get_timer_time() to remove device from guiEngine
Make irrlichtdevice & scene manager less exposed
* Code style fixes
* Move porting::getVideoDriverName, getVideoDriverFriendlyName, getDisplayDensity, getDisplaySize to RenderingEngine
Fix XORG_USED macro -> RenderingEngine + create_engine_device from RenderingEngine constructor directly
* enum paralax => enum parallax
The 'absheight' flag was added years ago for the floatlands of 'indev'
mapgen (now deleted). The feature mirrored all ore placement around y = 0
to place ores in floatlands.
In MTG we now use dedicated ore registrations for floatlands.
The feature is crude, inflexible, problematic and very rarely used, it
also makes ore vertical range code more complex.
Minetest 0.5 is a good chance to remove the feature.
The flag itself remains to not break flag values.
The 'absheight' flag was added years ago for the floatlands of 'indev'
mapgen (now deleted). The feature mirrored all ore placement around y = 0
to place ores in floatlands.
In MTG we now use dedicated ore registrations for floatlands.
The feature is crude, inflexible, problematic and very rarely used, it
also makes ore vertical range code more complex.
Minetest 0.5 is a good chance to remove the feature.
The flag itself remains to not break flag values.
Some settings of paramters can cause mgv7 variables to be -inf, nan or -nan.
This can cause massive vertical columns of water to appear above sea level.
As with 'large_cave_depth', lava depth was previously a fixed y value and
therefore incompatible with the ability to shift terrain vertically.
Add 'lava_depth' mapgen parameter to mgflat, mgfractal, mgv5, mgv7.
The value cannot be fixed because we can shift terrain vertically.
This also makes these mapgens consistent with mgflat and mgvalleys which
have 'large_cave_depth' parameters.
When adding items to an empty ItemStack, limit the number of items taken
based on the maximum stack size in the item description.
Likewise, when checking whether items will fit into an empty ItemStack,
only absorb as many items as are allowed in a single stack and return the rest.
* Automatic item and node colorization
Now nodes with a palette yield colored item stacks, and colored items
place colored nodes by default. The client predicts the colorization.
* Backwards compatibility
* Use nil
* Style fixes
* Fix code style
* Document changes
Previously, the carving of rivers was disabled above 'shadow_limit' even if
floatlands were disabled. This caused rivers to be unnecessarily disabled if
mapgen was customised to have surface level above y = 1024.
Previously, maximum spawn level was set to 'water_level + 16'. This would result
in spawn search failing if terrain had been customised to be much higher than
'water_level' at all points.
Also raise spawn level by 1 node to avoid spawning half-buried in a biome 'dust'
node such as 'default:snowblock'.
* C++11 patchset 10: continue cleanup on constructors
* Drop obsolete bool MainMenuData::enable_public (setting is called with cURL in server loop)
* More classes cleanup
* More classes cleanup + change NULL tests to boolean tests
* C++11 patchset 9: move hardcoded init parameters to class definitions
C++11 introduced the possibility to define the default values directly in class definitions, do it on current code
Also remove some unused attributes
* CollisionInfo::bouncy
* collisionMoveResult::collides_xy
* collisionMoveResult::standing_on_unloaded
* Clouds::speed
* More constructor cleanups + some variables removal
* remove only write guiFormSpecMenu::m_old_tooltip
* move header included inside defintions in genericobject.h
* remove some unused since years exception classes
* remove unused & empty debug_stacks_init
* remove unused & empty content_nodemeta_serialize_legacy
* remove forgotten useless bool (bouncy) in collision.cpp code
Previously, when removing decorations we searched upwards and removed until we
found air or water. However, the node above the decoration can be 'ignore' if
a stacked decoration extends into the volume above the mapchunk. The result
could be a problematic column of air placed in the volume of 'ignore'. The
unnecessary placing of air also slows the function.
Add a check for 'ignore' nodes when removing decorations.
Recently we started to remove decorations if the dirt below was flowed away,
but this did not check for stacked decorations, causing them to have only
their lowest node removed.
Also, placed mud could partially bury stacked decorations.
Remove 'old_is_water' bool which on testing is never true.
Add new function 'moveMud()' to reduce indentation.
Remove stacked decoration nodes above a removed decoration.
Remove stacked decorations partially buried in placed mud.
thread_local permits to limit variable lifetime to thread duration. Use it on each setting place which uses static to cache variable result only for thread lifetime. This permits to keep the same performance level & reconfigure server from MT gui in those various variables places.
Add thread_local to undersampling calculation too.
- Allow lua to chose whatever directories or files can be selected
- Fix selecting directories
- Rename dialog to `guiPathSelectMenu` from `guiFileSelectMenu`
- Rename lua function for opening the menu from `show_file_open_dialog` to `show_path_select_dialog`
- Remove duplicate code and fix code style.
Related changes
- fix `clang-format` whitelist.
- Regenerate minetest.conf.example
Previously, findSpawnPos() did not take the 'mapgen_limit' setting into account,
a small limit often resulted in a spawn out in the void.
Use the recently added 'calcMapgenEdges()' to get max spawn range through a new
mapgenParams function 'getSpawnRangeMax()'.
Previously, when a player respawned into a world, 'objectpos_over_limit()' was
used as a check, which was inaccurate.
Use the recently added 'saoPosOverLimit()' to get exact mapgen edges.
Also fix default value of 'm_sao_limit_min'.
These code be generated by CSM, a modded client or just copy and pasted by the player.
Changes
- Update configuration example and setting translation file.
- Remove colour codes before logging chat.
- Add setting to remove colour codes before processing the chat.
C++11 implement function deleting, it's generally used to prevent some object copy
In script API use this function removal on ScriptApiBase instead of ScriptApiClient/Server/MainMenu, this affect all ScriptApis
Move DISABLE_CLASS_COPY with constructor, the deleted function permit to replace function in its original place
* Have the server send the player list to the client
Currently the client generates the player list based on the Client active object list, the issue with this is that we can't be sure all player active objects will be sent to the client, so this could result in players showing up when someone run `/status` but auto complete not working with their nick and CSM not being aware of the player
* Move GCC to GCC 6 & GCC 7
* Move Clang to Clang 3.6 & Clang 4.0
* LINT moves from Clang 3.9 to Clang 4.0
* Move XCode 7.3 to 8.0
* Use more travis tricks to install compilers instead of adding complexity to our build script
* Clang format fixes on checked files (compat Cpp11 instead of Cpp03)
* Mingw GCC update from 4.8.4 to 5.3 (Ubuntu Xenial)
* Drop mingw cmake generated files and add them to gitignore
